Promate EnergyMate User manual

Dual-Output Power Bank for Tablets and Smartphones

Introduction
Thank you for purchasing the energyMate rechargeable
portable baery. Please read the following instrucons carefully
before using the product and be sure to keep this User Guide in
safe place for future reference.
Package Contents
energyMate
User Guide
USB Cable
Interchangeable Tips – Apple 30-pin, Micro-USB, Mini-USB,
Samsung Galaxy Tab
Carrying Pouch
Warranty Card
1

Specifications
Baery type: Lithium-polymer
Power capacity: 6600mAh
Rated input: 5.0V/1.0A
Rated output: 5.0V/1.0 DC (Output 1)
5.0V/2.1 DC (Output 2)
Charging me: 6-7 hours
Compatibility
Port 1: Smartphones, iPhone, iPod (30-pin ver.), all digital devices charged
via USB, Mini-USB, Micro-USB ports
Port 2: iPad (30-pin ver.), Samsung Galaxy Tab
Using your energyMate
1) Aach the included USB-Micro USB cable to a USB charger
or PC’s USB port and then connect to the energyMate.
2) While the energyMate is being charged, blue LED will light up.
Once the energyMate is fully charged, all the LEDs will light
up and stop charging.
3) Connect the energyMate to iPad, cell phone or digital device
using the USB cable and press the central buon to begin
charging.
4) If there is no acvity for 30 seconds, the output will be shut off
automacally.
2
Front

Battery Capacity Indicator
The number of acve LEDs indicates baery power level. Press
the buon to check power level, the LED will light up for 60 seconds.
1 light flashing means less than 20% power
1 light steady means power is between 20-40%
2 lights steady means power is between 40-60%
3 lights steady means power is between 60-80%
4 lights steady means power is between 80-100%
Remarks:
Low
Empty. Time to recharge
Mid
High
Full
LED light - on
LED light – off
3
Front

Maintenance
To keep your energyMate operang at its fullest potenal, make
sure to do the following:
1) Re-charge your energyMate once every three months when it
is not in use.
2) Keep your energyMate dry and away from moist condions
and corrosive materials.
3) Do not wash the energyMate with harsh chemicals, soaps or
detergents.
Warning
• Read all instrucons and warnings prior to using this product.
Failure to read and follow these safety instrucons could result
in fire, explosion, electrical shock or other hazard, causing
serious and/or fatal injury and/or property damage.
• Do not modify, disassemble, open, drop, crush, puncture or
shred the product
• Do not expose the product to rain or water
• Keep away from open flames or sunlight to prevent heat build-up
• Keep away from high voltage devices
• This product is not a toy, keep away from children. Ensure that
all persons who use the product read and follow these warnings
and instrucons
4