Promate Titan-20C User manual

20000mAh High-Capacity Power Bank
with 3.1A Dual USB Output
USB-C + Micro-USB Input Li-Polymer Battery Ultra-Portable
Titan-20C
User Guide

1
Introduction
Charge your device on the go with the Titan-20C, a powerful 20000mAh lithium-polymer
power bank. It boasts a total of two high-output USB charging ports to charge any
compatible USB-powered devices. The Titan-20C also comes with built-in safety features
such as Automatic Voltage Regulation, which provides an optimum output based on the
device connected. It’s compatible with all kinds of smartphones and tablets that are
compatible with USB-C and Micro-USB.
Packaging Contents
• Titan-20C
• USB Charging Cable
• User Guide
Specifications
• Battery Capacity: 20000mAh
• Battery Type: Li-Polymer
• Input:
• Micro-USB: 5V, 2A
• USB-C: 5V, 3A
• Total Output: 5V, 3.1A
• USB-1: 5V, 2A
• USB-C: 5V, 3.1A
• Charging Time: 12 Hours
Features
• Powerful Backup Battery: Powerful 20000mAh li-polymer backup battery
• Compact & Lightweight: Compact and lightweight, the Titan-20C is easy to carry around
• Ultra-Fast Dual USB Ports: Charge your USB-powered devise with the ultra-fast dual USB ports
• Simultaneous Charging: Titan-20C can simultaneously charge two USB-compatible
devices as fast as possible
• Universal Compatibility: Titan-20C is compatible with all USB-powered smartphones
and tablets
• Available in Various Colors: Available in different colors, the Titan-20C offers plenty of ways
for you to express your personality
English

2
English
Precautions
Please read all safety instructions and warnings thoroughly before using this product. Improper use
of this product may result in damage to this or attached products.
1. Do not disassemble the back-up battery or attempt to fix it.
2. Kindly use an original charging cable provided to charge the product.
3. Do not attempt to replace any part of this Back-up battery or battery inside.
4. Do not crush, puncture, dispose of in fire, short the contacts or expose the battery to water or other liquids.
5. Do not connect input and output in reverse.
6. Do not store or use the battery in a high temperature environment, including intense sunlight or heat.
7. Avoid drops, bumps, abrasions and impacts.
8. If there is any reason to believe that there is damage to the battery, discontinue use immediately.
9. If you find that the battery is too hot, or is emitting an odor, or is deformed, punctured or exhibits
any suspicious or abnormal behavior, discontinue use immediately and contact our customer service.
10.Always charge this product before extended storage.

English
3
Appearance & Interface Description
1. Power Button
2. LED Battery Level Indicator
3. USB-C Input/Output Port
4. Micro-USB Input Port
5. USB Output Port
Operation Instructions:
Checking the remaining power left in Titan-20C back-up battery
1. To view the remaining power left, press the power button once and view
the LED Battery Level Indicator
Charging Titan-20C back-up battery
• Connect one end of the Micro-USB or USB-C Cable to Titan-20C and the
other end to a desktop/laptop or a USB Power Adapter. The Battery Level
LED Indicators will light up indicating that the back-up battery is charging normally.
Charging USB chargeable devices using Titan-20C
• Plug the USB cable into the USB output port on Titan-20C back-up battery
and the other end into the device.
• Plug the USB cable into the USB-C output port on Titan-20C back-up battery
and the other end into the device.
No of LED’s Active
% of power remaining
1
<=25% <=50% <=75% <=100%
2 3 4
345
1
2

4
Spanish
Aspecto y descripción de la interfaz
1. Botón de encendido
2. Indicador LED de nivel de batería
3. Puerto de entrada / salida USB-C
4. Puerto de entrada Micro-USB
5. Puerto de salida USB
Instrucciones de operación:
Comprobación de la energía restante que queda en la batería de respaldo Titan-20C
1. Para ver la energía restante, presione el botón de encendido una vez y vea el indicador LED
de nivel de batería.
Charging Titan-20C back-up battery
• Conecte un extremo del cable Micro-USB o USB-C al Titan-20C y el otro extremo a una computadora
de escritorio o portátil o un adaptador de alimentación USB. Los indicadores LED de nivel de batería se
encenderán indicando que la batería de respaldo se está cargando normalmente.
Carga de dispositivos USB recargables que usanTitan-20C
• Conecte el cable USB en el puerto de salida USB de la batería de respaldo Titan-20C y el otro extremo
en el dispositivo.
• Conecte el cable USB en el puerto de salida USB-C de la batería de respaldo Titan-20C y el otro extremo
en el dispositivo.
No de LED activo
% de energía restante
1
<=25% <=50% <=75% <=100%
2 3 4
345
1
2

5
French
Nombre de LED actifs
% de charge restante
1
<=25% <=50% <=75% <=100%
2 3 4
Description de l’aspect et de l’interface
1. Bouton d’allumage
2. Indicateur LED du niveau de charge de la batterie
3. Port USB-C d’entrée/sortie
4. Port micro-USB d’entrée
5. Port USB de sortie
Instructions d’utilisation:
Vérifier la charge restante de la batterie de secours Titan-20C
1. Pour voir la charge restante, appuyer une fois sur le bouton d’allumage et observer l’indicateur
LED de niveau de charge de la batterie
Chargement de la batterie de secoursTitan-20C
• Connecter le côté micro-USB ou USB-C du câble à Titan-20C et l’autre bout du câble à un ordinateur
portable ou à un adaptateur de charge USB. Les indicateurs LED de niveau de la batterie vont s’allumer, i
ndiquant que la batterie de secours se charge normalement.
Charger un appareil chargeable par câble USB à l’aide deTitan-20C
• Connecter le câble USB au port USB de sortie de la batterie de secours Titan-20C et l’autre bout du
câble à l’appareil à charger.
• Connecter le câble USB au port USB-C de sortie de la batterie de secours Titan-20C et l’autre bout du
câble à l’appareil à charger.
3 4 5
1
2

German
6
Keine LEDs an
% der Batterie
aufgeladen
1
<=25% <=50% <=75% <=100%
2 3 4
Beschreibung von Aussehen und Interface
1. Power-Taste
2. LED Batteriestandsanzeige
3. USB-C Eingangs-/Ausgangs-Port
4. Micro-USB Eingang
5. USB Ausgangs-Port
Bedienungsanleitung:
Überprüfen des Batteriestands in der internenTitan-20C Batterie
1. Um die verbleibende Batterieenergie anzuzeigen, drücken Sie bitte die Taste einmal. Der Batteriestand
wird auf der LED Batteriestandsanzeige angezeigt
Die Titan-20C Batterie aufladen
• Schließen Sie ein Ende des Lightning-USB-Kabels an Titan-20C an und verbinden Sie das andere Ende
mit einem Desktop/Laptop oder einem USB-Ladegerät. Die LED Batteriestandsanzeige leuchtet auf,
um anzuzeigen, dass die interne Batterie ordnungsgemäß geladen wird.
Per USB aufladbare Geräte mit demTitan-20C aufladen
• Verbinden Sie ein Ende des USB-Kabels mit dem USB-Ausgang des Titan-20C und das andere Ende
mit dem Gerät.
• Verbinden Sie ein Ende des USB-Kabels mit dem USB-C-Ausgang des Titan-20C und das andere
Ende mit dem Gerät.
345
1
2

7
Portuguese
Aparência e descrição da interface
1. Botão ligar
2. Indicador de nível de bateria de LED
3. Porta de entrada/saída USB-C
4. Porta de entrada Micro-USB
5. Porta de saída USB
Instruções de operação:
Conferindo a carga restante na bateria de reserva Titan-20C
1. Para checar a carga restante, pressione o botão ligar uma vez e verifique o indicador de bateria de LED
Carregando a bateria de reservaTitan-20C
• Conecte uma extremidade do Micro-USB ou do cabo USB-C ao Titan-20C e a outra extremidade a um
desktop/laptop ou a um adaptador de tomada USB. O indicador de bateria de LED irá se acender
indicando que a bateria de reserva está sendo carregada normalmente.
Carregando aparelhos carregavéis com USB usando o Titan-20C
• Plugue o cabo USB na porta de saída USB da bateria de reserva Titan-20C e a outra extremidade no
seu aparelho.
• Plugue o cabo USB na porta de saída USB-C da bateria de reserva Titan-20C e a outra extremidade no
seu aparelho.
Números de LED’s
Acessos
% de carga restante
1
<=25% <=50% <=75% <=100%
2 3 4
345
1
2

Romanian
8
Numărul de LED-uri active
Procentul de energie rămas
1
<=25% <=50% <=75% <=100%
2 3 4
Descrierea aspectului și interfeței:
1. Buton de pornire/oprire
2. Indicator LED pentru nivelul bateriei
3. Port intrare/ieșire USB-C
4. Port intrare micro-USB
5. Port ieșire USB
Instrucțiuni de utilizare:
Verificarea energiei rămase în acumulatorul de
rezervă Titan-20C
1. Pentru a vizualiza nivelul energiei rămase, apăsați o dată
butonul de pornire și vizualizați indicatorul
LED pentru nivelul bateriei.
Încărcarea bateriei de rezervă Titan-20C
• Conectați un capăt al cablului micro-USB sau USB-C la Titan-20C, și celălalt capăt la un desktop/laptop
sau un adaptor USB de alimentare. Indicatorul LED al nivelului bateriei se va aprinde, indicând faptul
că bateria de rezervă se încarcă în mod normal.
Încărcarea dispozitivelor compatibile USB utilizândTitan-20C
• Conectați cablul USB la portul de ieșire USB corespunzător de pe bateria de rezervă Titan-20C și
celălalt capăt la dispozitiv.
• Conectați cablul USB la portul de ieșire USB-C corespunzător de pe bateria de rezervă Titan-20C
și celălalt capăt la dispozitiv.
1
2
345

9
Slovenian
Štev. aktiviranih LED
% preostale moči
1
<=25% <=50% <=75% <=100%
2 3 4
Videz in opis vmesnika
1. Gumb za vklop
2. LED indikator napolnjenosti baterije
3. USB-C vhodna/izhodna vrata
4. Mikro-USB vhodna vrata
5. USB izhodna vrata
Navodila za delovanje:
Preverjanje preostale moči v sekundarni baterijiTitan-20C
1. Za ogled preostale moči, pritisnite enkrat na gumb za vklop in si oglejte LED indikator
napolnjenosti baterije
Polnjenje sekundarne baterijeTitan-20C
• En konec kabla Micro-USB ali USB-C povežite z Titan-20C in drugi z namizjem/prenosnikom ali
električnim adapterjem USB. LED indikator napolnjenosti baterije bo zasvetil in prikazal,
da se sekundarna baterija normalno polni.
Polnjenje USB naprav za ponovno polnjenje z uporaboTitan-20C
• USB kabel vklopite v USB izhodna vrata na sekundarni bateriji Titan-20C in drug konec v napravo.
• USB kabel vklopite v USB-C izhodna vrata na sekundarni bateriji Titan-20C in drug konec v napravo
345
1
2

10
Russian
Нет активных
светодиодов
% оставшейся
мощности
1
<=25% <=50% <=75% <=100%
2 3 4
Внешний вид и описание интерфейса
1. Кнопка питания
2. Светодиодный индикатор уровня заряда батареи
3. Входной/Выходной порт USB-C
4. Входной порт микро-USB
5. Выходной порт USB
Инструкция по эксплуатации:
Проверка оставшейся мощности в батарее резервного электропитания Titan-20C
1. Чтобы увидеть, сколько питания осталось, один раз нажмите на кнопку питания и посмотрите на
светодиодный индикатор уровня заряда батареи.
Зарядка резервной батареи Titan-20C
• Подключите один конец кабеля микро-USB или USB-C к Titan-20C, а другой конец – к настольному
компьютеру / ноутбуку или адаптеру питания USB. Светодиодные индикаторы уровня зарядки
батареи засветятся, указывая, что резервная батарея заряжается нормально.
Зарядка заряжаемых устройств USB посредством Titan-20C
• Вставьте кабель USB в выходной порт USB на резервной батарее Titan-20C, а другой конец
подсоедините к устройству.
• Вставьте кабель USB в выходной порт USB-C на резервной батарее Titan-20C, а другой конец
подсоедините к устройству.
345
1
2

11
Görünüş & Arayüz Tarifi
1. Açma kapama butonu
2. LED pil seviyesi göstergesi
3. USB-C Giriş/Çıkış Portu
4. Micro-USB Çıkış Portu
5. USB Çıkış Portu
Kullanma Talimatları:
Titan-20C yedek bataryasında kalan şarjı kontrol etme
1. Ne kadar şarj kaldığını kontrol etmek için, açma kapama tuşuna bir defa basın ve LED pil seviye
göstergesine bakın
Titan-20C yedek bataryayı şarj etmek
• Micro-USB veya USB-C kablosunun bir ucunu Titan-20C'ye diğer ucunu masaüstü
bilgisayar/laptopunuza veya USB güç adaptörüne takın. Pil seviyesi LED göstergesinin ışığı
yedek bataryanın olması gerektiği şekilde şarj olduğunun bir işareti olarak yanacaktır.
Titan-20C'yi kullanarak USB ile şarj edilen cihazları şarj etmek
• USB kablosunun bir ucunu Titan-20C yedek bataryanın USB çıkışına diğer ucunu ise cihazınıza takın.
• USB kablosunun bir ucunu Titan-20C yedek bataryanın USB-C çıkışına diğer ucunu ise cihazınıza takın.
Açık LED sayıdı
% kalan şarj
1
<=25% <=50% <=75% <=100%
2 3 4
Turkish
345
1
2

Chinese
12
外观和界面说明
1. 电源按钮
2. LED电池电量指示器
3. USB-C输入/输出端口
4. Micro-USB输入端口
5. USB 输出端口
操作说明：
查看Titan-20C备用电池的剩余电量
1. 要查看剩余电量，请按一次电源按钮，然后查看LED电池电量指示器
给Titan-20C备用电池充电
• 将Micro-USB或USB-C数据线的一端连接到Titan-20C，
另一端连接到台式机/笔记本电脑或USB电源适配器。电池电量LED指示灯将亮起，
表示备用电池在正常充电。
使用Titan-20C为可通过USB充电的设备充电
• 将USB数据线插入Titan-20C备用电池的USB输出端口，另一端插入设备。
• 将USB数据线插入Titan-20C备用电池的USB-C输出端口，另一端插入设备。
点亮的LED数量
剩余电量百分比
1
<=25% <=50% <=75% <=100%
2 3 4
345
1
2

Persian
13
ﻂﺑار حﺮﺷ و ﺮھﺎظ
ﻦﺷور و شﻮﻣﺎﺧ ﻪﻤﮐد .1
یﺮﺗﺎﺑ ﺢﻄﺳ LED ﺮﮕﻧﺎﺸﻧ .2
USB-C ﯽﺟوﺮﺧ/یدورو هﺎﮔرد .3
Micro-USB یدورو هﺎﮔرد .4
USB ﯽﺟوﺮﺧ هﺎﮔرد .5
:تﺎﯿﻠﻤﻋ یﺎھ ﻞﻤﻌﻟارﻮﺘﺳد
Titan-20C نﺎﺒﯿﺘﺸﭘ یﺮﺗﺎﺑ رد هﺪﻧﺎﻤﯿﻗﺎﺑ یوﺮﯿﻧ ﯽﺳرﺮﺑ
ﺮﮕﻧﺎﺸﻧ و ﺪﯿھد رﺎﺸﻓ رﺎﺑ ﮏﯾ ار ﻦﺷور و شﻮﻣﺎﺧ ﻪﻤﮐد ،هﺪﻧﺎﻤﯿﻗﺎﺑ یوﺮﯿﻧ راﺪﻘﻣ هﺪھﺎﺸﻣ یاﺮﺑ .1
ﺪﯿﻨﮐ هﺪھﺎﺸﻣ ار یﺮﺗﺎﺑ ﺢﻄﺳ LED
Titan-20C نﺎﺒﯿﺘﺸﭘ یﺮﺗﺎﺑ ﺾﯾﻮﻌﺗ
ﮏﯾ ﺎﯾ پﺎﺘﭙﻟ/یﺰﯿﻣور ﺮﺗﻮﯿﭙﻣﺎﮐ ﻪﺑ ار ﺮﮕﯾد ﺮﺳ و Titan-20C ﻪﺑ ار USB-C ﺎﯾ Micro-USB ﻞﺑﺎﮐ ﺮﺳ ﮏﯾ •
ﺪھد ﯽﻣ نﺎﺸﻧ ﻪﮐ ﺪﻧﻮﺷ ﯽﻣ ﻦﺷور «یﺮﺗﺎﺑ ﺮﮕﻧﺎﺸﻧ یﺎھLED» .ﺪﯿﻨﮐ ﻞﺻو USB قﺮﺑ رﻮﺘﭘادآ
.ﺖﺳا یدﺎﻋ ترﻮﺻ ﻪﺑ نﺪﺷ ژرﺎﺷ لﺎﺣ رد نﺎﺒﯿﺘﺸﭘ یﺮﺗﺎﺑ
Titan-20C ﻂﺳﻮﺗ USB ﺎﺑ ژرﺎﺷ ﻞﺑﺎﻗ یﺎھ هﺎﮕﺘﺳد ندﺮﮐ ژرﺎﺷ
هﺎﮕﺘﺳد ﻪﺑ ار ﺮﮕﯾد ﺮﺳ و ﺪﯿﻧﺰﺑ Titan-20C نﺎﺒﯿﺘﺸﭘ یﺮﺗﺎﺑ یور USB ﯽﺟوﺮﺧ هﺎﮔرد ﻪﺑ ار USB ﻞﺑﺎﮐ •
.ﺪﯿﻨﮐ ﻞﺻو
ﻪﺑ ار ﺮﮕﯾد ﺮﺳ و ﺪﯿﻧﺰﺑ Titan-20C نﺎﺒﯿﺘﺸﭘ یﺮﺗﺎﺑ یور C-USB ﯽﺟوﺮﺧ هﺎﮔرد ﻪﺑ ار USB ﻞﺑﺎﮐ •
.ﺪﯿﻨﮐ ﻞﺻو هﺎﮕﺘﺳد
تعداد LEDهای فعال
درصد نیروی باقیمانده
1
<=25% <=50% <=75% <=100%
2 3 4
345
1
2

14
Arabic
عدد المؤشرات المضاءة
الشحنة المتبقية %
12
34
<= %100 <= %75 <= %50 <= %25
ﺔﮭﺟاﻮﻟاو ﺮﮭﻈﻤﻟا ﻒﺻو
ﻞﯿﻐﺸﺘﻟا رز .1
ﺔﻳرﺎﻄﺒﻟا ىﻮﺘﺴﻣ ﺮﺷﺆﻣ .2
USB-C جاﺮﺧﻹا/لﺎﺧدﻹا ﺬﻔﻨﻣ .3
USB وﺮﻜﻳﺎﻣ لﺎﺧدإ ﺬﻔﻨﻣ .4
USB جاﺮﺧإ ﺬﻔﻨﻣ .5
:ﻞﯿﻐﺸﺘﻟا تﺎﻤﯿﻠﻌﺗ
Titan-20C ـﻟ ﺔﯿطﺎﯿﺘﺣﻻا ﺔﻳرﺎﻄﺒﻟا ﻲﻓ ﺔﯿﻘﺒﺘﻤﻟا ﻦﺤﺸﻟا ﺔﻗﺎط ﻦﻣ ﻖﻘﺤﺘﻟا
ﺔﻳرﺎﻄﺒﻟا ﺔﻗﺎط ﺮﺷﺆﻣ ضﺮﻌﻟ ةﺪﺣاو ةﺮﻣ ﻞﯿﻐﺸﺘﻟا رز ﻂﻐﺿا ،ﺔﯿﻘﺒﺘﻤﻟا ﻦﺤﺸﻟا ﺔﻗﺎط ضﺮﻌﻟ .1
Titan-20C ـﻟ ﺔﯿطﺎﯿﺘﺣﻻا ﺔﻳرﺎﻄﺒﻟا ﻦﺤﺷ
ﻲﺒﺘﻜﻣ ﺮﺗﻮﯿﺒﻤﻛ زﺎﮭﺠﺑ ﺮﺧﻵا فﺮﻄﻟاو Titan-20C زﺎﮭﺠﺑ USB-C وأ Micro-USB ﻞﺑﺎﻛ ﻲﻓﺮط ﺪﺣأ ﻞﯿﺻﻮﺘﺑ ﻢﻗ •
ﺪﯿﻗ ﻦﺤﺸﻟا ﺔﯿﻠﻤﻋ نأ ﻰﻟإ ةﺮﯿﺸﻣ ﺔﻳرﺎﻄﺒﻟا ىﻮﺘﺴﻣ تاﺮﺷﺆﻣ ءﺎﻀﺘﺳ .USB ﺔﻗﺎط لﻮﺤﻣ وأ لﻮﻤﺤﻣ ﺮﺗﻮﯿﺒﻤﻛ /
.ﻲﻌﯿﺒط ﻞﻜﺸﺑ ﺬﯿﻔﻨﺘﻟا
Titan-20C ماﺪﺨﺘﺳﺎﺑ USBلﺎﺑ ﻦﺤﺸﻠﻟ ﺔﻠﺑﺎﻘﻟا ةﺰﮭﺟﻷا ﻦﺤﺷ
.زﺎﮭﺠﻟﺎﺑ ﺮﺧﻵا فﺮﻄﻟاو Titan-20C ـﻟ ﺔﯿطﺎﯿﺘﺣﻻا ﺔﻳرﺎﻄﺒﻟا ﻲﻓ USB ﺬﻔﻨﻤﺑ USB ﻞﺑﺎﻛ ﻞﯿﺻﻮﺘﺑ ﻢﻗ •
.زﺎﮭﺠﻟﺎﺑ ﺮﺧﻵا فﺮﻄﻟاو Titan-20C ـﻟ ﺔﯿطﺎﯿﺘﺣﻻا ﺔﻳرﺎﻄﺒﻟا ﻲﻓ USB-C ﺬﻔﻨﻤﺑ USB ﻞﺑﺎﻛ ﻞﯿﺻﻮﺘﺑ ﻢﻗ •
345
1
2