PRONAR TG110 User manual

PRONAR SP. Z O.O.
17-210 NAREW, UL. MICKIEWICZA 101A, WOJ. PODLASKIE
TEL.: [phone] [phone]
[phone] [phone]
FAX: [phone] [phone]
ISSUE 1A
08-2022
EDITION NO. 649.01.UM.1A.EN
USER MANUAL
SEPTIC TANKER
PRONAR TG110
TRANSLATION OF THE ORIGINAL MANUAL

Manufacturer's address
PRONAR Sp. z o.o.
ul. Mickiewicza 101A
17-210 Narew
Contact phones
[phone]
[phone]
[phone]
[phone]
Website
www.pronar.pl
https://pronar-recycling.com/pl/
Service hotline
[phone]
[phone]
[phone]
[e-mail]
This manual contains important safety and operating instructions for the machine. The manual should be kept near the machine so
that it is accessible to persons authorized to operate it.
Keep this manual for future reference. If the manual is lost or damaged, contact the seller or the manufacturer for a duplicate.
Copyright © PRONAR Sp. z o.o. All rights reserved.
This study is the property of PRONAR Sp. z o.o. and is a work within the meaning of the Copyright and Related Rights Act.
Any part of this document may not be distributed or copied in any way (electronic, mechanical or otherwise) without the written
consent of PRONAR Sp. z o.o.

Pronar TG110
Table of contens
CHAPTER 1. INTRODUCION 1.1
1.1 Dear User 1.2
1.2 Rules for using the User's Manual 1.4
1.3 Target group 1.5
1.3.1 End user (User, Authorized User, Operator) 1.5
1.3.2 Qualiedperson(qualiedpersonnel) 1.6
1.3.3 Service personnel 1.7
1.3.4 Unauthorized user 1.7
1.4 Symbols and tags used in the manual 1.9
1.4.1 Danger 1.9
1.4.2 Caution 1.9
1.4.3 Advice 1.9
1.4.4 Personalprotectiveequipmentpictograms 1.10
1.4.5 Qualicationpictograms 1.10
1.4.6 Typography of the User Manual 1.11
1.5 Glossary 1.13
1.6 Designation of directions in the manual 1.15
1.7 Final acceptance 1.16
1.7.1 Preliminary information 1.16
1.7.2 Checking the machine after delivery 1.16
1.7.3 Therststartofthemachine 1.17
1.8 Personalprotectiveequipment 1.20
1.8.1 General 1.20
1.8.2 Work clothing 1.20
1.8.3 Hearing protectors 1.20
1.8.4 Work shoes 1.20
1.8.5 Warning vest 1.21
1.8.6 Protective gloves 1.21
1.8.7 Safety glasses with side shields 1.22
1.8.8 Industrial protective helmet 1.22
1.8.9 Anti-dust respirator 1.23
CHAPTER 2 GENERAL 2.1
2.1 Identication 2.2
2.1.1 Machineidentication 2.2
2.1.2 Drivingaxleidentication 2.5
2.2 Intended use of the machine 2.6
2.2.1 Using the machine in accordance with intended use 2.6

Pronar TG110
2.2.2 Expected misuse 2.7
2.3 Agriculturaltractorrequirements 2.9
2.3.1 Minimum load on the front axle of the tractor 2.10
2.4 Machineequipment 2.11
2.5 Transport 2.12
2.5.1 Trucking 2.12
2.5.2 User's transport 2.13
2.6 Terms of warranty 2.15
2.7 Threat to the environment 2.16
CHAPTER 3 SAFETY OF USE 3.1
3.1 Basic safety rules 3.2
3.2 Safety when operating the hydraulic and pneumatic systems 3.4
3.3 Safety during coupling of the machine 3.4
3.4 Principles of safe maintenance 3.6
3.5 Description of residual risk 3.9
3.6 Driving on public roads 3.10
3.7 Workingwiththemachinewiththepowertake-o󰀨(PTO) 3.13
3.8 Information and warning stickers 3.15
CHAPTER 4 CONSTRUCTION AND PRINCIPLE OF OPERATION 4.1
4.1 Technical characteristics 4.2
4.2 Machine construction 4.4
4.3 Pneumatic braking system 4.6
4.4 Parking brake 4.9
4.5 Liquiddistributionsystem 4.11
4.5.1 Construction of the pumping system 4.11
4.5.2 Hydraulicliquiddistributionsystem 4.12
4.6 Docking mechanism 4.14
4.6.1 Construction of the docking mechanism 4.14
4.6.2 Hydraulic system of the docking mechanism 4.15
4.7 Electrical lighting installation 4.18
CHAPTER 5 CONTROL PANEL 5.1
5.1 Control system 5.2
5.1.1 Main control pilot 5.3
5.1.2 Additional remote control 5.4
5.1.3 Inductive sensors 5.5
CHAPTER 6 RULES OF USE 6.1
6.1 Drawbar height adjusting 6.2

Pronar TG110
6.2 Handling of the parking stand 6.4
6.3 Connecting and disconnecting of the machine 6.6
6.3.1 Connecting of the machine 6.6
6.3.2 Disconnecting the trailer 6.10
6.4 Loading 6.12
6.4.1 Loading via suction connection (left or right) 6.12
6.4.2 Loading via docking system (left or right) 6.14
6.5 Transport 6.17
6.6 Unloading 6.20
6.7 Feed pump 6.22
6.8 Rules for the use of tires 6.23
6.9 Cleaning 6.25
6.10 Storage 6.27
CHAPTER 7
PERIODIC INSPECTIONS AND TECHNICAL MAINTENANCE 7.1
7.1 General 7.2
7.2 High-risk places 7.3
7.3 Maintenance and inspection schedule 7.4
7.4 Trailer preparation 7.7
7.5 Air tank drainage 7.9
7.6 Guard inspection 7.10
7.7 Checking plugs and connection sockets 7.11
7.8 Checking of the machine before driving 7.13
7.9 Air pressure measurement, tire and rim inspection 7.15
7.10 Inspection and cleaning of the delivery pump 7.17
7.11 Cleaningtheairlters 7.19
7.12 Cleaning the drainage valve 7.20
7.13 Checking brake lining wear 7.21
7.14 Checking of the clearance of the axle bearings 7.22
7.15 Checking of mechanical brakes 7.24
7.16 Adjusting of the parking brake cable tension 7.26
7.17 Hydraulic system Checking 7.28
7.18 The pneumatic braking system inspection 7.29
7.19 Tighteningtorquesforscrewconnections 7.31
7.20 Tightening road wheels 7.33
7.21 Replacement of hydraulic hoses 7.35
7.22 Adjustment of the clearance of wheel axle bearings 7.36
7.23 Brake adjustment 7.38
7.24 Lubrication 7.43
7.25 Consumables 7.47