Provision ISR DI-380AHD36 User manual

Eco-AHD Series
Pro-AHD Series
USER MANUAL

1
Contents
1 CAUTIONS
2 Product Introduction
2.1 Production Instruction
2.2 Product Feature
3
Menu Instruction
4 Product Installation
5 Specification
4.1 Note
4.2 Installation Tools and Information
4.3 Installation Method
4.4 Connection

2 3
1 CAUTIONS
1. To reduce the risk of electric shock, do not open
the machine and maintain by yourself, please consult
a professional service person.
2. To prevent fire or shock hazard, use the power
after safety certification, the input voltage, current,
voltage polarity and operating temperature must
meet the requirements of this camera.
3. Please note the operating temperature and
environmental requirements of the camera, avoid too
low or too high temperature. General operating
temperature range of -10°C ~ +50°C (Fahrenheit
temperature is 14°F ~ 122°F). Avoid flooding and rain,
minimize dust and moisture erosion, otherwise
camera would be damaged.
4. Cameras in use should avoid direct sunlight, glare,
otherwise the sensor will be damaged.
5. Do not touch the sensor surface, if any foreign
objects exits, a cotton swab or lens paper can be
used to wipe, if it is difficult to remove, a neutral
detergent diluted with water would be useful. Do not
use corrosive solution.
6. In order to make the camera work smoothly and
obtain asatisfactory image, the power cord and video
connection can not be too long, otherwise the
increase of line loss will lead to the inadequate
magnitude of the operating voltage of the camera or
video signal Inadequate.
7. In order to prevent the camera from falling, please
do not place the camera on an unstable bracket, base
or other unstable objects. Otherwise it will lead to
injury, at the same time, the camera will be damaged.
8. The camera cannot be placed near the radiator or
heating resistor.

4 5
2 Product Introduction
2.1 Production Instruction
PROVISION-ISR’s new series of cameras are
adopted CMOS image sensor with high performance,
which provides mega pixel resolution and supports
HD video. Moreover, it supports monitoring signals
coaxial transmission. Transmission distance can
reach more than 300M based on 75-3 coaxial cable.
The series can support both AHD/CVBS 960H output
as well as realize high speed, long distance and real
time video transmission.
2.2 Product Feature
● Coaxial cable adopted, BNC connector as cable
standard.
● Auto Day/Night (ICR)
● Auto Defog, HBLC
● Digital WDR, 2D/3D NR
● Motion Detection, Privacy Mask
● AHD/CVBS Signal Selectable from OSD
AHD-960H: Press left 3 seconds;
960H-AHD: Press right 3 seconds;
PAL-NTSC: Press down 3 sceonds to switch
between PAL&NTSC
3 Menu Instruction
Press "MENU" button to enter the main MENU, press
"UP" and "DOWN" selection menu, press "LEFT" and
"RIGHT" choice or set the corresponding function, to
enter submenu please press "MENU" again. Set up
save and exit.
4 Product Installation
4.1 Note
1. Make sure the unit is powered off before installa-
tion.
2. Check power supply voltage consistent with the
electric voltage to prevent voltage unworthy, resulting
in damage to the device.
3. Do not use in the environment beyond the
boundaries of the temperature, and maintain good
ventilation to prevent the rain in order to reduce the
risk of fire or electric shock.

6 7
4. The installation and maintenance of this product
should be professional, please do not in any way to
remove or modify the equipment; can only use the
required accessories of manufacturers. Problems
caused by unauthorized repair are at your own risk.
4.2 Installation Tools and Information
Prepare the required engineering data and instruc-
tions. Before installation please prepare the following
tools and instrumentation: A straight or a
Phillips-head screwdriver, multi-meter, scissors,
needle nose pliers, tape measure, pencil and so on.
4.3 Installation Method
1. Check the equipment whether it is damaged.
2. Mounting bracket or base.
① If the cement wall, install the expansion screws
(expansion screw holes need stand or base hole),
and then mount bracket or base.
② If the wooden wall, use self-tapping screws to
mount.
3. Mounting the camera
a. Dome Camera
Adjust the lens position and make it aim at the
monitoring points and present a clear picture,
manually fix lens location and adjust the hemisphere
cover. Re-examine the screen whether the character
meets the requirement. Tighten the hemisphere
cover.
b. Bullet Camera
Adjust the body so that the lens aims at the monitor-
ing points and presents a clear picture. Tighten the
screws, to ensure that it does not move.
Installation method above is for reference only,
the specific installation, please be kind.
Note:
The wall needs to bear at least
3X weight of bracket (base) and
camera.

8 9
4.4 Connection
Connection as show in the figure below

10 11

12 13
PRO-AHD camera (720P)
DI-380AHD36 / DI-380AHDVF / DAI-380AHDVF
I3-380AHD36 / I4-380AHDVF / BX-382AHD
5 Specifications:
Model
Image Sensor
Effective Pixels
Scanning System
Resolution
Min. Illumination
Day & Night
IR LED
OSD Menu
Backlight Compensation
S/N Ratio
White Balance
Noise Reduce
Video Output
Defog
Privacy Mask
Motion Detection
D-Effect
Lens
Power
Operation temp.
Dimension
Net Weight
DI-380AHD36
2 Array LED (20m)
3.6mm
DC12V±10%, ~310mA
104*70.8*93.2mm
269g
DI-380AHDVF
3 Array LED (25m)
2.8-12mm
DC12V±10%, ~400mA
129.5*90*119mm
476g
DAI-380AHDVF
3 Array LED (25m)
2.8-12mm
DC12V±10%, ~250mA
45*119.5mm
810g
I3-380AHD36
3 Array LED (25m)
3.6mm
DC12V±10%, ~410mA
206.5*67.6*68.5mm
380g
BX-382AHD
0.01Lux
N/A
CS Mount
DC12V±10%, ~100mA
123.5*63.7*65mm
300g
1/3" 1.3MP Sony Sensor
1280(H)×960(V)
Progressive
Digital:1280×960P, Analog:960H
0.01Lux / (0Lux IR On)
EXT, Color, B&W, AUTO
Available (11 Languages, AHD/CVBS Output selectable)
OFF/BLC/HSBLC
≥60dB (AGC Off)
AWB, ATW, AWC (Push), Indoor, Outdoor, Manual
3D-DNR (For AHD), 2D-DNR (For Analog)
AHD / CVBS (Signal Selectable from OSD)
Off/On
Off/On (4 Areas)
Off/On (4 Areas)
Freeze, Mirror, Negative Image
-10℃~+50℃(14℉~122℉)
I4-380AHDVF
4 Array LED (40m)
2.8-12mm
DC12V±10%, ~480mA
286*77*85.6mm
836g

14 15
PRO-AHD camera (1080P)
DI-390AHD36 / DI-390AHDVF
I3-390AHD36 / I4-390AHDVF
Model
Image Sensor
Effective Pixels
Scanning System
Resolution
Min. Illumination
Day & Night
IR LED
OSD Menu
Backlight Compensation
S/N Ratio
White Balance
Noise Reduce
Video Output
Defog
Privacy Mask
Motion Detection
D-Effect
Lens
Power
Operation temp.
Dimension
Net Weight
DI-390AHD36
2 Array LED (20m)
3.6mm
DC12V±10%, ~310mA
104*70.8*93.2mm
269g
DI-390AHDVF
3 Array LED (25m)
2.8-12mm
DC12V±10%, ~400mA
129.5*90*119mm
476g
I3-390AHD36
3 Array LED (25m)
3.6mm
DC12V±10%, ~410mA
206.5*67.6*68.5mm
380g
1/3" 2MP Sony Sensor
1984(H)×1225(V)
Progressive
Digital:1920×1080P, Analog:960H
0.01Lux / (0Lux IR On)
EXT, Color, B&W, AUTO
Available (11 Languages, AHD/CVBS Output selectable)
OFF/BLC/HSBLC
≥72dB (AGC Off)
AWB, ATW, AWC (Push), Indoor, Outdoor, Manual
3D-DNR (For AHD), 2D-DNR (For Analog)
AHD / CVBS (Signal Selectable from OSD)
Off/On
Off/On (4 Areas)
Off/On (4 Areas)
Freeze, Mirror, Negative Image
-10℃~+50℃(14℉~122℉)
I4-390AHDVF
4 Array LED (40m)
2.8-12mm
DC12V±10%, ~480mA
286*77*85.6mm

16 17
ECO-AHD camera (720P)
DI-380AHDE36 / DI-380AHDEVF
I1-380AHDE36 / I3-380AHDE36 / I4-380AHDEVF
Model
Image Sensor
Effective Pixels
Scanning System
Resolution
Min. Illumination
Day & Night
IR LED
OSD Menu
Backlight Compensation
S/N Ratio
White Balance
Noise Reduce
Video Output
Defog
Privacy Mask
Motion Detection
D-Effect
Lens
Power
Operation temp.
Dimension
Net Weight
DI-380AHDE36
24 LED (15m)
3.6mm
DC12V±10%, ~230mA
104*70.8*93.2mm
269g
DI-380AHDEVF
36 LED (25m)
2.8-12mm
DC12V±10%, ~250mA
129.5*90*119mm
476g
I1-380AHDE36
24 LED (15m)
3.6mm
DC12V±10%, ~190mA
163*60*60mm
275g
I3-380AHDE36
36 LED (25m)
3.6mm
DC12V±10%, ~360mA
206.5*67.6*68.5mm
380g
I4-380AHDEVF
42 LED (35m)
2.8-12mm
DC12V±10%, ~380mA
286*77*85.6mm
836g
1/3" 1MP Sensor
1280(H)×720(V)
Progressive
Digital:1280×720P, Analog:960H
0.1Lux / (0Lux IR On)
EXT, COLOR, B&W, AUTO
Available (11 Languages, AHD/CVBS Output selectable)
OFF/BLC/HSBLC
≥44dB (AGC Off)
AWB, ATW, AWC (Push), Indoor, Outdoor, Manual
3D-DNR (For AHD), 2D-DNR (For Analog)
AHD / CVBS (Signal Selectable from OSD)
Off/On
Off/On (4 Areas)
Off/On (4 Areas)
Freeze, Mirror, Negative Image
-10℃~+50℃(14℉~122℉)