Provision ISR DAIPT-390AX4 User manual

DAIPT-390AX4 USER MANUAL
for DAIPT-390AX4

1
DAIPT-390AX4 USER MANUAL
1080P 4in1 Dome MINI PTZ CAMERA
QUICK INSTALLATION GUIDE
1. Important Safety Notes:
Please read this manual carefully before installing and operating the camera.
Please refer to the technical specs to confirm you are using a suitable power supply. Do
not use power supply with higher/lower rating than specified.
Do not attempt to disassemble the camera; in order to prevent electric shock, do not
remove any screws or covers.
There are no user-serviceable parts inside. Please contact the nearest service center if
there is any technical failure.
Avoid incorrect operation, shock vibration or heavy weight pressing which can damage
the camera.
Do not use corrosive detergent to clean the camera. If necessary, please use a soft dry
cloth to wipe dirt. For tough contamination, use neutral detergent. Any cleanser for high
grade furniture is applicable.
Avoid aiming the camera directly towards extremely bright objects such as the sun, as it
may permanently damage the image sensor.
Please follow the installation instructions.
Do not operate the camera in environments that exceeds the specified temperature,
humidity or power.
Keep away from any heat sources such as radiators, heat registers, stoves, etc.
Do not expose the product to the direct airflow of an air conditioner.
All pictures and examples used in the manual are for reference only.
Important Note: Clean the transparent cover to make sure the image clear.
Please use wiper provided in the package to clean the color, don’t touch the transparent
cover by finger directly as the acid sweat of the human finger may rust the surface of the
cover.
2. Box Contents:
ITEM
QUANTITY
DAIPT-390AX4 Camera
1
Ceiling Bracket
1
Installation sticker
1
Installation Screws
4
3. Camera Cable
Please find cable description below. You can also refer to Figure 2-1.

2
DAIPT-390AX4 USER MANUAL
Video Connector
4in1 1080P Video Output
Power Connector
12V DC Power Input (2A Recommended)
DIP switch
Signal output selection
Picture 2-1: Cable Reference
4. Device Installation:
The camera is for a ceiling installation ! (If wall installation is required, please purchase wall
bracket) Please refer to the installation instructions below.
Important: The installation surface should be able to hold at least triple the weight of the
assembled camera.
4.1 Take out installation sticker from package box, mark the holes' position base on wall mount
bracket bottom installation holes.
4.2 Use the screws to fix the mounting bracket to the ceiling according to the holes that have
just been put on the base.
4.3 Align the camera base with the three mounting holes in the mounting bracket, and turn it
clockwise for 30 °.
Warnings:

3
DAIPT-390AX4 USER MANUAL
1) Do not adjust the camera’s orientation manually. This might damage the device.
2) Pay attention to install the blind area of the camera toward to the corner or not
important area.
5. Camera Settings & Preset Commands:
In this camera, the CoC commands divides to 2. If you are using AHD/TVI/CVBS, Please use
the 1st table. If you are using CVI, use the 2nd table.
AHD/TVI/CVBS Command
Shortcut Key Function (Set Preset)
Set # 89preset
Delete all presets
Set #93preset Dome restart
Set #94 preset Restore Factory Setting
Set #96 preset Park OFF
Set #97 preset 60S Park time ON
Set #98preset 120S Park time ON
Shortcut key Function (Call preset)
Call #67preset Change system to PAL
Call #68preset Change system to NTSC
Call #69 preset Open Advanced Settings menu
CVI Command
Shortcut Key Function (Set Preset)
Set # 54preset Delete all presets
Set #55 preset Restore Factory Setting
Set #56 preset Park OFF
Set #57 preset 60S Park time ON
Set #58preset 120S Park time ON
Shortcut key Function (Call preset)
Call #53 preset Open Advanced Settings menu
Call #67preset Change system to PAL
Call #68preset Change system to NTSC
Important Note:
Power off action: Manually set#6 preset as power off memory position.
Parking position is default OFF. Manually set #1 preset as parking position, set #97&98 for
parking time

DAIPT-390AX4 USER MANUAL
6. Technical Specs:
Model DAIPT-390AX4
Image sensor
1/2.9” CMOS
Resolution
HD Analog
2MP(AHD/CVI/TVI-1920*1080)
Analog 700TVL
Optical Zoom X4 (2.8mm-12mm)
Digital Zoom No
Horizontal Angle of view 106°~51.8°
Sync System Internal
Min. Illumination 0.01lux(0lux with IR On)
Day & Night Auto/Day/Night
IR LED 2pcs LED(10m)
S/N Ratio 50dB
Focus Auto/Manual
Auto/Gain
Auto/Manual
Wide-D No
White Balance ATW/Manual/Outdoor/Indoor
BLC On/Off
Shutter Speed 1/50-1/100000
Sense Up No
Pan/title range
250° (Pan); 65(title)
Parking function Yes
Port
Video port BNC port
Power port DC12V/1A
Other
Power 10W(max)
Operation Temp. -20°C ~+60°C