QPC 30/30M Portable Document Camera User Manual
© Copyright 2012 QOMO HiteVision, LLC. All Rights Reserved
Precautions
To prevent fire for shock hazard, do not expose the unit to rain or moisture.
To prevent electrical shock, do not open the unit. Refer to qualified personnel for service
only.
Do not use the unit continuously for more than 24 hours with camera auto focus on. It
may cause damage to the camera lens.
Be careful not to spill water or other liquids onto the unit, or allow combustible or metallic
objects to get inside the base.
Unplug the visualizer from the wall outlet when it is not being used for a long period of
time.
Clean the unit with a soft cloth lightly moistened with a mild detergent solution.
Clean the lens carefully with an air spray or soft dry cloth to avoid scratching it.
Rotate the camera lens cap before powering the unit on.
Product Introduction
Thank you for purchasing the QPC30 Portable Document Camera. This visualizer comes with
a new design which is simple, flexible, portable, and with a high resolution. The visualizer can
be used to present 3D objects, texts, graphs, transparencies, and negative films. It can be
connected to a projector, PC, and other multi-media equipment. The visualizer is not just
equipment for the corporate environment but also a great tool for academic, medical, and
scientific communities.
