Qomo QPC35 User manual

1
QPC35
Caterpillar
U
SER
M
ANUAL

2
Contents
Part 1. Precautions ....................................................................................... 3
Part 2. Preparing the document camera ..................................................... 5
Part 3. Installation and connection ............................................................. 6
Part 4. Setting up ......................................................................................... 8
Part 5. Software Operation ......................................................................... 9
Part 6. Troubleshooting ............................................................................. 19
Part 7. Maintenance ................................................................................... 20

3
Part 1. Precautions
1. Do not allow children to operate the folding arm without supervision.
2. Do not insert fingers into the arm joint area. Pay attention to the six folding
areas (indicated by the arrows.)
3. Do not look directly at the LED light source, this may cause retinal damage.
4. Do not pull or twist folding arm in opposite direction.
5. Do not touch the camera glass, this may cause blurred images.
6. Do not disassemble it to perform any repair. In case of damage please contact
technical support.
Do not put your fingers in
the joints to avoid injury

4
To achieve the best image, please follow the suggestions below:
 Do not use Docking Station or USB Harbor when connecting the camera.
 Turn on the Lamp Button to get the best image.
 Connect the black wire to increase lamp brightness.
 Confirm that your computer meets the dual core CPU requirement.
 Avoid multiple tasks when screen capture is running as it consumes a
good deal of the CPU processing power.
Lamp button
Lighting source

5
Part 2. Preparing the Document Camera
2.1 Knowing the Document Camera parts
2.2 Specifications
Camera
Type CMOS
Max. Pixels 5.0M pixels
Output Style MJPEG/YUV
Size 1/4”
Auto Exposure YES
Autofocus YES
Auto White Balance YES
Resolution available
480*640，800*600，1024*768，1920*1080，2048*1536，
1944*2592（Resolution may be limited by your computer
capabilities.)
FOVi A3
Frame Rate Up to 30fps@1080P
Image processing Screenshot, webcam capture, timedShot, annotation,
zoom, and Image flip, using QCamera software.
video and Recording Video Recording available with QCamera software
Camera Lens

6
Aperture F=2.8mm
Illumination
Type LED Brightness Adjustable
Output Power Max.1.5W
Audio & video Input and Output
USB2.0 high speed 480Mbps
Built-in high sensitivity microphone
Operating System & Driver
Supporting System Windows XP, vista, Windows 7, Windows 8
Driver Standard UVC&UAC
Other Features
Power Dissipation 5.0V DC，Max. power below 3.5W
Weight 2.35/2.1Kg
Dimension 58.5*28.5*10.5/49.0*28.5*10.5 cm
Accessories
USB Cable, CD, Warranty, Quick Star Guide
2.3 Button functions on camera head
The On/Capture Button on the camera head will perform the following functions:
 Press button once to start the QCamera software.
 Press button once to capture live image while running QCamera software.
 Double press button to record video while running QCamera
software.
Part 3. Installation and connection
Please follow the below steps to install the camera and connect with software.
1. Open the packaging and remove the camera from the packing bag.
2. Fix the Clamp on table by screwing tightly
On/Capture

7
3. Insert the bottom stem of the Folding Arm into the Clamp.
4. Install the QCamera software from the CD, or download from the Qomo
website.
http://qomo.com/FileList.aspx?FileType=1
5. Connect the white USB wire to computer for camera functionality. Connect
the black wire into computer to increase camera brightness.
6. Press the On/Capture button on the Camera to start the QCamera software；
Or double click the QCamera shortcut on desktop.
S
crew tightly
Table

8
Part 4. Setting up
This section provides useful tips on how to adjust the Document Camera smoothly
for your needs.
 Camera head
The Camera Head can rotate freely 360°.
The Camera Head can turn freely 180° up and down, left and right.
 LED Lamp
If natural light is not enough, turn on the Lamp on the Camera Head.
1. Press the Lamp Button to turn on / off the LED lamp.
2. Adjust the brightness by rotating the Lamp Button on top of the camera head.
 Mechanical folding arm
The folding arm can bend freely 90° up and down and the lower arm can rotate
360° for different view of live image.
Lamp Button
360°
180° 180°
Note: Before turning the Camera Head, please set the Tighten Knob on both side of the
Camera Head to ensure the head loose enough to operate.

9
Part 5. Software Operation
The software consists of three parts:
 Camera Display Area
 Resources
 Toolbar
5.1 Camera Display Area
Default Document Camera display area that shows images and videos.
Editing Area where annotation can be freely made such as text, lines and
geometrical figures.
5.2 Resources
Display the software default resources, as well as the recent captured images and
videos on the left of the screen. There are two options:
 Local Resources
 Recent Captured Resources
Clicking the button to show and hide local and recent captured resource.
Clicking the button to switch between local resources and recent captured
resources.
Local Resources have a variety of categories including arrows, emoticons math
360°
90°

10
symbols, etc. Double click the category folder to enter the thumbnail gallery of
the resources. There are three ways to insert the resource on camera display area.
 Double click on the resource
 Right click the selected resource, and select from the
option menu.
 Drag and drop the selected resource onto the camera display area.
Under the Local Resources，Click the button，a window will pop up for
users to choose the resource and file format from the computer. Select the
desired resource and click the button, it will be added onto the camera
display area.
The QCamera software supports the following files formats:
 Image：PNG, BMP, GIF, PNG, JPEG
 Audio：WAV, MP3, WMA
 Video：MP4, RMVB, AVI, MOV
 Flash：SWF
Recent Captured lists the thumbnails of images, audio files and videos captured
by the QCamera software.
Right click on the thumbnails of the recently captured resource to get the
following options :
Note: Resource size can be changed in the System Setting.