1. Plugging in the Power Outlet
Quick Guide to Connecting QPC60
• Connecting via VGA cable
Use VGA cable to connect
VGA IN connector on
the QPC60 (2A) to the VGA OUT
connector on the computer (2B).
Use VGA cable to connect VGA
OUT connector on QPC60 (2C) to
VGA IN connector on projector (2D).
• Connecting via USB
Press MENU button > select “USB Connect”. Choose “Disk” to connect mass storage. Choose “PC Cam” to
be as a PC-Cam.
• To display computer image, press PC
button (PC) on the control panel.
• To toggle between display modes, use
keyboard command (Fn + ).
• The signal is only pass through from
VAG IN to VGA OUT port on
document camera.
2. Connect to a computer or projector
2A 2C
2D
2B
Use power adapter to connect DC IN connector on the product to
a standard 100V~240V AC power outlet.
Innovative • Interactive • Intuitive
www.Qomo-Europe.eu
