Qomo QPC50W User manual

QPC50W
User Manual

I Packing List：
When opening the box, please confirm the product is in good condition, and
all accessories have been included:

II Quick Start
1. Install QOMO’s QView Wireless software：
a. Plug USB Flash Drive into the computer.
b. Open the “QView Wireless” file in the USB Flash Drive. Double
click to run the “setup” file, and follow the instructions to install.
2. Start and connect the document camera:
a. Press the power button on the interactive visualizer. When
powered on, the power indicator light will turn blue.
b. Insert the USB wireless LAN antenna to the computer's USB
port, and the indicator light will flash. Connect to the Wi-Fi signal
of the document camera by clicking on the drop down menu
found in the computer WIFI settings, clicking on “Wi-Fi 2”, and
connecting to “Qomo_suffix”.
i. If your computer does not recognize the USB Wireless
LAN antenna, open the “WLAN driver” in the USB flash
drive and install the driver on the computer, find the WIFI
signal of the QOMO Wireless doc cam.
c. The name of the WIFI is: “Qomo_suffix”. Connect to this WIFI
option using the password "12345678".
Note: This password cannot be changed for the convenience of the teacher.
3. Launch the QView Wireless software.

III Software
1. Physical Display Mode
Right side whiteboard toolbar
Bottom Toolbar
Mouse: Switch to mouse and cancel the
current whiteboard function
Arrow tool: Draw arrows on screen
Brush tool: Annotate over screen
Highlighter:
H
ighlight with half
-
transparent line
Laser Pointer: Line that will disappear
Eraser
Clear: Clear all
annotation
Line type:
Change tool line style
Color:
Change tool color
Line width:
Change tool line width
Transparency
:
A
djust the transparency of the line
More: Text, Shapes
Switch
to desktop
Save the image
Image resolution
Zoom by dragging circle left/right
Adjust to actual image size
Appropriate size, adjust the video or image display area to suitable size,
typically
A4
.

2. Multi-User Function (Split Screen Mode)
Click the Split Screen button on the bottom right corner to enter Split Screen
Mode. This allows multiple users to upload and annotate over content on the
screen at the same time.
Insert camera images, stored pictures, or videos in Split Screen Mode
1. Click on the following buttons to add an existing file, select “Local Pic”
or “Local Video”. To take a new photo from the QPC 25 document
camera, click on the “Scanning” button.
Rotate image
Freeze/unfreeze image
Capture Image: File automatically saves to library
Recording Video: File automatically saves to library
Open file: Open existing files

2. Snip or capture the picture using the following icons
Bottom Toolbar (from left to right)
Zoom by dragging circle left/right
Adjust to actual image size
Appropriate size, adjust the video or image display area to suitable size,
typically
A4
.
Rotate image
Split screen or single screen
Capture Image: File automatically saves to library
Recording Video: File automatically saves to library
Open file: Open existing files

IV FAQs
Q: I cannot find the WIFI signal on the computer after turning on the document
camera.
A: One possibility is that the product is running out of power. In this case,
please charge it. The other possibility is that there may be interference with
another signal. Try restarting the document camera, then try to reconnect to
the WIFI. If more than a dozen units are connected at the same time, make
sure to add distance between each document camera.
Q: After connecting the document camera to WIFI and opening the software,
there is no image.
A: It may be due to low battery. Please charge the document camera
immediately, restart the computer and software, then reconnect the WIFI
signal of the terminal.
Q: What is the range of the wireless interactive document camera?
A: Up to 50 meters.
Q: How long does it take to fully charge the document camera? How long
does it stay charged?
A: A red light indicates charging. It will take approximate 6 hours to reach full
charge. When the battery is fully charged, the indicator light will turn green. It
can be used for 6-8 hours after being fully charged.
FCC statement
This device complies with Part 15 of the FCC rule: Operation is subject to the
following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference that is received, including any
interference that may cause undesired operation.
*RF warning for portable device: This device has been evaluated to meet
general RF exposure requirement. The device can be used in portable
exposure condition without restriction.
This device is acting as a host and operates in the 2.4GHz (2412-2462 MHz)
band.
Note:
 This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation.
 This equipment generates uses and can radiate radio frequency energy

and, if not installed and used in accordance with instructions, may cause
interference for radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from the
circuit the receiver is connected too.
 Consult the dealer of an experienced radio/TV technician for help