Rebotec Travel User manual

REBOTEC®Rehabilitationsmittel GmbH
DE-49610 Quakenbrück, Artlandstr. 57- 59
Telephone: [phone]
Fax: [phone]
Web: www.rebotec.de
BA-Nr.: 02.01.053/2021-01-A01 Email: [email protected]
Read this User Manual before using the device for the first time and keep it at hand for the user as well
as for future use and subsequent sales.
EN
User Manual
Travel & Big Travel
1. Product description
1.1. Introduction
•The product described here is a medical device of risk class I
according to (EU) 2017/745 MDR.
•In this user manual, you will find information on the safe and proper
initial operation, use, maintenance and care of this product. Care-
fully read this user manual before using the device. Follow the
safety instructions and act accordingly.
2. Features
2.1. Intended purpose
•The product is used for support and relief in case of restrictions of
the lower extremities. It allows the user to pursue their desire for
mobility. There must be sufficient upper body musculature for safe
use. Persons with sensory impairments may not be able to use this
item. The article does not impose any special requirements on the
education of the user. It can be disassembled for travel purposes.
Specification:
a=Height-adjustable / c=Indoor & outdoor use
1=Standard clip with transport position/ 2=Squeeze pressure, collaps-
ible
2.2. Conditions of use
•Temperature range: -10°C to +35°C; direct radiant heat on the
product must be avoided. Relative humidity: 40% to 85%. Outside
of these conditions, the product must only be used for a short time.
•The product is not suitable for use in swimming pools or saunas,
as surface discolouration and limitations of mechanical strength
may occur.
2.3. Storage & transport
•Temperature range: +5° C to +25° C; direct radiant heat on the
product must be avoided. Store the product in dry rooms with a
humidity of up to 65%.
2.4. Disposal
•Disposal and recycling of used products and packaging must be
carried out in accordance with currently valid regulations. Please
contact a disposal company for further information. The Infection
Protection Act must be observed. Please observe any labels and
information on packaging material and act accordingly.
3. Symbols & nameplates
Symbol
Meaning
Symbol
Meaning
Read the
manual!
Year of manufacture
Device
Article number
Manufacturer
Language
Maximum user
weight in kg
Symbol
Meaning
Symbol
Meaning
Important
information!
Product complies
with (EU) 2017/745
MDR
4. Warranty
•For this product the manufacturer grants a warranty of 12 months.
Compliance with the general terms and condi-
tions(www.rebotec.de/agbs), as well as the intended use, are a
basic prerequisite. The statutory warranty provisions shall apply.
•Unauthorised modifications to this product will void the product’s
conformity and the warranty.
4.1. Complaint
•Please contact us before returning the product. To reduce
transport damage, use the original packaging if possible.
•The Infection Protection Act must be complied with.
Please make sure that the product does not pose a risk of infec-
tion when returned. Enclose an information sheet on safety with
the product. Costs may incur for returns that are not marked
non-objectionable.
5. Safety instructions
Please observe the following safety instructions:
•Before using the device for the first time, the
User Manual must be read completely in order to avoid
damage caused by fault operation or hazards. Before each use,
check the device for visible damage or deficiencies. In case of mal-
functions or damage of any kind, the device must not be used.
Regularly check the suction foot for damage and wear; replace if
necessary.
•The walking aid must be placed on the floor as vertically as possi-
ble when walking. Therefore, never position the walking aid too far
away from the body or forward in the walking direction. Grasp the
handle completely and firmly with one hand. If possible, have an
assistant accompany and support you so that they can catch you if
you fall.
•The walking aid must not be used for any other purpose. There-
fore, only use them to support your ability to walk and not, for ex-
ample, as a stand-up aid, for levering, moving furniture or other ob-
jects. Do not attach any objects (bag, pouch, etc.) to the walking
aid.
•After a long period of disuse: Have the walking aid checked by
qualified personnel or a specialist dealer. Do not perform any un-
authorised mechanical modifications (product liability!). Do not ex-
pose the walking aid to sunlight for a longer period of time (at the
window, at the heater, in the car). Heat can lead to changes in ma-
terial properties and durability.
•Attention, danger of slipping: Never walk with the walking aid on
snow or ice-covered ground without the anti-skid device (ice claw).
Be careful when walking over damp tiles, floors or crossing loose
carpeting. Never clean handles or suction caps with substances
containing oil. Be careful with unevenness, holes in the ground and
loose subsoil, because the walking aid can slip away unexpectedly
or sink in.
•There is a risk of injury with surface temperatures > 40°C. Do not
expose the product to high temperatures (e.g. sunlight, radiators,
hot water). Allow the product to cool before use.
If the product is used by patients with insensitive skin (no
temperature perception or skin damage), a heat check
(e.g. touching with the back of the hand) must be carried
out by the nursing staff.
Designation
108.50
Travel
2
130kg
c
a
108.00
Big Travel
1
150kg
c
a
EN

REBOTEC / BA-Nr.: 02.01.053/2021-01-A01
EN
6. Incident reporting
•Serious incidents in connection with the product must be re-
ported immediately to the manufacturer ([email protected] ) and
BfArM (www.bfarm.de/DE).Use the BfArM reporting functions and
provided forms.
7. Reuse, lifetime
•The product is suitable for reuse. How often the product can be
reused depends on the frequency and nature of use. Before reuse,
the product must be reprocessed and the technical and functional
safety and reliability of the product must be checked and restored if
necessary. For more information, please see the reprocessing in-
structions (02.12.154). The reprocessing instructions and the
present operating instructions are available for download from
www.rebotec.de/downloads.
•If the product is used as intended, its lifetime is 2 years. The effec-
tive lifetime may vary depending on the frequency and intensity of
use and the general condition.
8. Setting up for use
•The product has been carefully inspected in the factory for freedom
from defects and completeness. Please check the product for any
possible transport damage and the completeness of the scope of
delivery upon receipt.
8.1. Adjustment to body height
•Have the product adjusted to your body height by the compe-
tent qualified personnel. The height is adjusted by means of a
telescopic aluminium tube with a clip (1). If the
product has a screw connection, this must be
loosened by turning to the left before adjust-
ment. After adjustment, the screw connection
must be tightened again.
8.2. Travel
•Delivery in disassembled travel condition. Remove both clips (1)
from the inner tube. Push the three tubes into each other and insert
the clips (1) completely at the desired position. Tighten both screw
connections (2).
8.3. Big Travel
•Delivery in travel condition. Remove the red clip (1) and the
grey clip (2). Pull the inner tube (a) to the third and thus longest
setting. Insert the red clip (1). Set the desired length of the
middle tube (b). Insert the grey clip (1).
8.4. Armrests
•To adjust / mount the armrest, press the push button and slide the
armrest into the desired position until the push button clicks into
place.
9. Product data
•We reserve the right to make technical developments and im-
provements with respect to the design shown in this User Manual.
10. Cleaning and care
•The device can be cleaned using a mild conventional cleaning
and disinfecting agent. After cleaning, wipe the device with
clean water and a cloth and then wipe the walking aid dry with
a clean cloth. Do not use scouring agents or cleaning agents
with aggressive solvent additives (observe the product infor-
mation!), as well as hard cleaning objects, as otherwise the
surfaces may be damaged or deposits may form.
11. Maintenance
•Have your walking aid checked by your specialist dealer at
least 1x every six months. Worn suction feet (wearing part)
must be replaced immediately. Pay attention to the diameter
(see 9). Pull the suction foot off the end of the tube. Push on
the new suction foot as far as it will go and check that it is firm-
ly seated.
Spare parts & accessories:
A / mm
B / mm
C / mm
α
108.50
225- 250
785- 935
22
23°
108.00
225- 250
795- 995
19
20°
Art. no.
Designation
200.00.00
Suction foot 19mm, grey
200.50.20
Suction foot 19mm, blue
201.30.00
Adjustment clip 22mm, red
201.00.25
Adjustment clip 25mm, grey
201.50.00
Adjustment clip 22mm, blue
01.01.001
User Manual
01.12.154
Reprocessing Instructions
160.02.02
Arm rest padding, Standard
160.02.03
Arm rest padding, Big
160.01.02
Handle padding, Standard
160.01.03
Handle padding, Big
255.00.00
Travel bag
1
1
2
a
b
1
1
a
b
2
c