Rebotec Walk-On XS User manual

REBOTEC®Rehabilitationsmittel GmbH
DE-49610 Quakenbrück, Artlandstr. 57- 59
Telephone: [phone]-
Fax: [phone]
Web: www.rebotec.de
BA-Nr.: 02.04.008/2021-08-A01 Email: [e-mail]
Read this User Manual before using the device for the first time and keep it at hand for the
user as well as for future use and subsequent sales.
EN
User Manual
Walking frame
Figure similar
Walk-On / Type
XS
Walk-On / Type
S
Walk-On / Type
M
Walk-On / Type
L
174.10
174.20
174.30
174.40
150 kg
150 kg
150 kg
150 kg
Walk-On / Type
XS with 2 castors
Walk-On / Type
S with 2 castors
Walk-On / Type
M with 2 castors
Walk-On / Type
L with 2 castors
175.10
175.20
175.30
175.40
120 kg
120 kg
120 kg
120 kg

REBOTEC / BA-Nr.: 02.04.008/2021-08-A01
- 2 -
EN
Table of contents
1. Product description .......................3
1.1. Introduction ............................................3
2. Features ..........................................3
2.1. Intended purpose ...................................3
2.2. Conditions of use...................................3
2.3. Storage & transport................................3
2.4. Equipment & functions..........................4
2.5. Packaging ...............................................4
2.6. Disposal ..................................................4
3. Symbols & nameplates..................4
4. Safety instructions.........................4
5. Incident reporting...........................5
6. Warranty..........................................5
6.1. Complaint................................................5
7. Reuse, lifetime................................5
8. Scope of delivery............................6
9. Setting up for use...........................6
9.1. Unfolding.................................................6
9.2. Adjusting the handle height..................6
10. Product data ...................................7
11. Operation of the product ...............7
11.1. Setting up for use...................................7
11.2. Use of the product..................................7
11.3. Braking system.......................................7
11.4. Folding of the product ...........................7
11.5. Replacing the brakes .............................8
12. Troubleshooting.............................8
13. Care and maintenance...................8
13.1. Cleaning and care ..................................8
13.2. Maintenance............................................8
‒(cracks, breakage, loose parts).......................8
14. Spare parts & accessories .......... 10
15. Drawing & dimensions ................ 11

REBOTEC / BA-Nr.: 02.04.008/2021-08-A01
- 3 -
EN
1. Product description
Figure shows:
A
Front bar
B
Rear bar
C
Handlebar
D
Handles
E1
Castor with parking brake
E2
Foot cap
F
Front leg
G
Rear leg
H
Star knob nuts, height adjustment
I
Folding mechanism
J
Nameplate
1.1. Introduction
•The product described here is a medical device of
risk class I according to (EU) 2017/745 MDR.
•In this user manual, you will find information on the
safe and proper initial operation, use, maintenance
and care of this product.
•Carefully read this user manual before using the
device. Follow the safety instructions and act ac-
cordingly.
2. Features
2.1. Intended purpose
•The product is used for support and relief in case
of restrictions of the lower extremities. It allows the
user to pursue their desire for mobility. There must
be sufficient upper body musculature for safe use.
Persons with sensory impairments may not be
able to use this item. The article does not impose
any special requirements on the education of the
user.
Specification:
•Height adjustable handle
•Foldable
•Indoor use
Indication
•Impairment of mobility in the case of damage to lo-
comotive/balance system with sufficiently pre-
served walking ability/coordination, if the use of
other walking aids is insufficient
•- To maintain/promote/secure walking
•During use, care must be taken to ensure suffi-
ciently spacious living conditions.
2.2. Conditions of use
•Temperature range: 5°C to 35°C; direct radiant
heat on the product must be avoided.
•Relative humidity: 40% to 75%. Outside of these
conditions, the product must only be used for a
short time.
•Folding for transport or storage is possible.
•This product may not be used to transport heavy
objects.
•There must be a flat surface of sufficient size for
the stool to be placed on. See 15.
2.3. Storage & transport
•Temperature range: 5° C to 25° C; direct radiant
heat on the product must be avoided.
•Store the product in dry rooms with a humidity of
up to 65%.
Designation
174.10
Walk-On / Type XS
150kg
174.20
Walk-On / Type XS
150kg
174.30
Walk-On / Type XS
150kg
174.40
Walk-On / Type XS
150kg
175.10
Walk-On / Type XS with 2
castors
120kg
175.20
Walk-On / Type XS with 2
castors
120kg
175.30
Walk-On / Type XS with 2
castors
120kg
175.40
Walk-On / Type XS with 2
castors
120kg
A
B
C
D
F
E2
G
H
I
J
E1

REBOTEC / BA-Nr.: 02.04.008/2021-08-A01
- 4 -
EN
2.4. Equipment & functions
•Foldable
•Handle height adjustable (see 9.2 & 15)
•2 swivelling castors with parking brake (only art.
no. 175...)
2.5. Packaging
•We recommend you keep the packaging for a later
transport.
•Dimensions type XS: 700 mm x 470 mm x 650 mm
•Dimensions type S: 700 mm x 470 mm x 750 mm
•Dimensions type M: 700 mm x 470 mm x 750 mm
•Dimensions type L: 700 mm x 470 mm x 850 mm
2.6. Disposal
•Disposal and recycling of used products and pack-
aging must be carried out in accordance with cur-
rently valid regulations. Please contact a disposal
company for further information.
•The Infection Protection Act must be observed.
•Please observe any labels and information on
packaging material and act accordingly.
3. Symbols & nameplates
Figure similar.
The nameplate must not be removed!
For ordering spare parts and processing
complaints, the device name, serial number and
year of manufacture will be required.
Symbol
Meaning
Symbol
Meaning
Read the
manual!
Year of
manufac-
ture Device
Serial num-
ber
Important
information!
Article num-
ber
Maximum
user weight
in kg
Symbol
Meaning
Symbol
Meaning
Care in-
structions
Mainte-
nance in-
structions
Applicable
for indoor
use only.
Manufac-
turer
Visual sig-
nal
Language
Read the
User Man-
ual!
Do not dis-
pose of as
household
waste.
Product complies with (EU) 2017/745
MDR
Caution!
Observe the safety instructions
Unique Device Identifier
(Data: GTIN / LOT (SN) / year of man-
ufacture)
Medical device label
This product is a medical device.
4. Safety instructions
Please observe the following safety in-
structions:
•Before using the device for the first time, the User
Manual must be read completely in order to avoid
damage caused by fault operation or hazards.
•Before each use, check the device for visible dam-
age or deficiencies.
•In case of malfunctions or damage of any kind, the
device must not be used.
Caution: Danger of falling!
•Be sure to check the following aspects before use:
Stability of the product.
Function of the parking brakes.
Proper locking of the folding mechanism.
Tight fit of the star knob nuts.
•Only use the product if completely assembled.
•Do not slump carelessly on the product.
•Only use the height adjustment in the holes pro-
vided for it.
•Avoid using the product on slippery or uneven
ground.
EN

REBOTEC / BA-Nr.: 02.04.008/2021-08-A01
- 5 -
EN
•Make sure that the brakes are always in locked po-
sition before using the article. Only release the two
brakes after you seen you are able to stand stably.
•Do not start walking until you are standing upright
and have grasped the handles with both hands.
•Always walk within the product frame and do not
push it too far in front of you, otherwise there is an
increased risk of falling due to incorrect loading.
•Users who are prone to uncontrolled actions or
movements must be supervised when using the
product.
•Use the article according to your mobility.
Caution: Danger of slipping!
•Do not grasp the handles with wet hands, as you
could slip and lose your grip.
Caution: Danger of tipping over!
•Avoid walking on steep inclines or declines; other-
wise you could lose control of the product.
•Do not use the product on stairs or steps.
•Do not hang any objects on the product.
•Do not lean too far over the handlebar.
•Avoid excessively leaning over the product.
Caution: Danger of breakage!
•Observe the permitted user weight (2.1).
•The product is not a means of transport for heavy
objects.
•The product is not suitable for passenger
transport.
•Do not expose the product to great temperature
fluctuations (2.2 & 2.3).
Caution: Danger of pinching or catching!
•There is a risk of pinching or catching on all moving
parts of the product. Be especially careful when
unfolding and folding that no body parts or objects
are caught between the moving parts.
Caution: Risk of injury!
•There is a risk of injury with surface temperatures
> 40°C. Therefore, do not expose the product to
high temperatures (e.g. sunlight, radiators, hot wa-
ter). Allow the product to cool before use.
If the product is used by patients with in-
sensitive skin (no temperature perception
or skin damage), a heat check (e.g. touching with
the back of the hand) must be carried out by the
nursing staff.
5. Incident reporting
•Serious incidents in connection with the product
must be reported immediately to the manufacturer
and BfArM.
BfArM: www.bfarm.de/DE
▪Use the reporting functions and provided
forms.
Manufacturer: [e-mail]
6. Warranty
•For this product the manufacturer grants a war-
ranty of 12 months. Compliance with the general
terms and conditions(www.rebotec.de/agbs), as
well as the intended use, are a basic prerequisite.
The statutory warranty provisions shall apply.
•Unauthorised modifications to this product will void
the product’s conformity and the warranty.
6.1. Complaint
•Please contact us before returning the product.
•To reduce transport damage, use the original
packaging if possible.
•The Infection Protection Act must be complied
with.
Please make sure that the product does not
pose a risk of infection when returned.
Enclose the supplied information sheet on
safety with the product.
Costs may incur for returns that are not marked
non-objectionable.
7. Reuse, lifetime
•The product is suitable for reuse. How often the
product can be reused depends on the frequency
and nature of use.
•Before reuse, the product must be reprocessed hy-
gienically and the technical and functional safety
and reliability of the product must be checked and
restored if necessary. See 13.
For more detailed information, please see the
reprocessing instructions (02.12.158) and the
maintenance instructions (02.11.149).
The documents can be downloaded from the fol-
lowing link.
▪www.rebotec.de/downloads
•When used as intended, the product has a lifetime
of 3 years. The effective lifetime may vary

REBOTEC / BA-Nr.: 02.04.008/2021-08-A01
- 6 -
EN
depending on the frequency and intensity of use
and the general condition.
8. Scope of delivery
•Walk-On
Walking frame
User manual (02.04.008)
•Walk-On with 2 castors
Walking frame with 2 swivelling castors with
parking brake
User manual (02.04.008)
•The reprocessing and maintenance instructions
can be ordered or viewed and downloaded at
www.rebotec.de/downloads.
9. Setting up for use
•The product has been carefully inspected in the
factory for freedom from defects and complete-
ness. Please check the product for any possible
damage which may have occurred during transport
and for completeness of the scope of delivery upon
receipt. Assembly or adjustment shall be carried
out by the specialist dealer.
9.1. Unfolding
•Place the product on its rear legs and push the
frame apart with the handle bar
•The folding mechanism locks automatically in its
final position.
•Check that the item is fully unfolded and the folding
lock is engaged.
9.2. Adjusting the handle height
•The height of the handlebar must be adjusted to
your body height.
•Loosen the two star knob screws (1) and pull them
out. Move the handlebar (2) to the desired height.
The holes of the two tubes must be aligned on top
of one another. Then tighten the star knob screw
again.

REBOTEC / BA-Nr.: 02.04.008/2021-08-A01
- 7 -
EN
•Check the function of the parking brakes.
(See 11.3, 11.5 & 13.2)
10.Product data
•We reserve the right to make technical develop-
ments and improvements with respect to the de-
sign shown in this User Manual.
•See 15.
Characteristic
Value
Walk-On / Type XS
1.
Product weight*
3.2 kg
2.
Total weight*
5.4 kg
Walk-On / Type S
1.
Product weight*
3.4 kg
2.
Total weight*
5.2 kg
Walk-On / Type M
1.
Product weight*
3.8 kg
2.
Total weight*
5.6 kg
Walk-On / Type L
1.
Product weight*
3.8 kg
2.
Total weight*
6.0 kg
Walk-On / Type XS with 2 castors
1.
Product weight*
3.6 kg
2.
Total weight*
5.4 kg
Walk-On / Type S with 2 castors
1.
Product weight*
3.6 kg
2.
Total weight*
5.2 kg
Walk-On / Type M with 2 castors
1.
Product weight*
4.0 kg
2.
Total weight*
5.6 kg
Walk-On / Type L with 2 castors
1.
Product weight*
4.0 kg
2.
Total weight*
6.0 kg
Skin compatibility
DIN EN 10993-1/-5
Flammability**
DIN EN 1021-1/-2
*Without accessories.
**Flame retardant: For products made of PUR ma-
terial.
11.Operation of the product
•Before use, it must be ensured that the product is
in proper condition. If defects or malfunctions are
evident, the product must not be used. Have the
defects corrected by a specialist dealer before use.
11.1. Setting up for use
•The product must be unfolded and the latches en-
gaged. Check that the parking brakes are securely
in place and that they function properly (see: 9.1 &
11.3).
11.2. Use of the product
•Support yourself on the handles while walking.
•Always walk as upright as possible and inside the
frame.
•Do not lean too far over the handlebar.
•Only use level paths and avoid obstacles such as
curbs and doorsteps.
•Avoid slippery and loose floor coverings.
•While walking, both brakes must be released.
11.3. Braking system
Improper use of the brake can cause unsafe
situations and damage (increased wear, lim-
ited function).
The product should not be used if the brakes are
applied or the wheels are locked.
Parking brake
•Press down the brake levers of both front wheels
with your foot until they engage. The two front
wheels are now braked. To release the brake, pull
the brake levers back up.
11.4. Folding of the product
Unfolding
•Place the product on its rear legs and push the
frame apart with the handle bar.
1
2
1
2

REBOTEC / BA-Nr.: 02.04.008/2021-08-A01
- 8 -
EN
•See 9.1.
Folding
•Pull the two locking bolts (1) upwards with one
hand each until the lock is released. Then lift the
product slightly and swing the bracket (2) upwards.
11.5. Replacing the brakes
•If the braking effect of the brakes begins to notice-
ably deteriorate, the product may no longer be put
into operation and must be repaired by a specialist
dealer.
12.Troubleshooting
Fault
Potential
cause
Remedy
Wheels turn
sluggishly
Deposits
Cleaning,
checking regu-
larly
Engagement
bolts
are jammed
Deposits
Cleaning,
replace en-
gagement
bolts
No or re-
duced brak-
ing function
Brake worn,
defective
Maintenance!
Have castors
replaced
Wheel set
bent, broken
Hitting an ob-
stacle
Maintenance!
Replacement
Visible
cracks or
breaks
Various
causes
Maintenance!
Replacement
Slip re-
sistance re-
duced
Worn foot cap-
sules
Maintenance!
Replacement
Wetness
Dry foot cap-
sules
13.Care and maintenance
13.1. Cleaning and care
The product can be cleaned using a mild
conventional cleaning and disinfecting
agent. After cleaning, wipe the product with a clean,
moist cloth and then wipe it dry with a dry cloth.
•Do not use scouring agents or cleaning agents
with aggressive ingredients (acids, thinners), as
well as hard cleaning objects (brushes), as other-
wise the surfaces may be damaged or deposits
may form on the materials.
•The product is suitable for manual cleaning and
disinfection. Please observe the reprocessing in-
structions (02.12.155).
13.2. Maintenance
•Wear and tear that is not recognised in time and /
or improper handling, as well as irregular or no
maintenance may result in accidents.
For safety reasons, the product must be
professionally maintained at least once a
year.
•Check product for visible damage
‒(cracks, breakage, loose parts)
•Check stability before use
Maintenance/inspection scope
•Maintenance should include the following inspec-
tion work and should be documented.
•Visual inspection for damage, wear and corrosion
of all frame parts such as:
•Frame
•Handlebar
•Foot capsules (replace in pairs)
•Front wheels (replace in pairs)
•Check all connecting elements (screws, nuts) for
completeness, fit and function
•Function of the folding mechanism
•Function of the height adjustment mechanism
•Function of the brakes (parking brake)
•In the event of damage and/or repairs, contact
your authorised dealer immediately.
•Never attempt any unauthorised modifications or
conversions to the product. These may impair the
safety and proper functioning of the device. In
such cases, REBOTEC will not assume any lia-
bility.
•Only use OEM spare parts for repairs. See 6.
•After maintenance or repair work has been carried
out, we recommend you clean the product before
using it again.
•Please note section 7& 14.
1
2
1

REBOTEC / BA-Nr.: 02.04.008/2021-08-A01
- 9 -
EN
•Please observe the maintenance instructions
(02.11.149).

REBOTEC / BA-Nr.: 02.04.008/2021-08-A01
- 10 -
EN
14.Spare parts & accessories
No.
Art. no.
Designation
1
400.00.84
Wheel for Walk-On, black
2
169.10.30
Foot cap
4
853.06.40
Star knob, complete
-
280.10.48
Back rest pad
-
02.04.008
User Manual
-
02.11.149
Maintenance Instructions
-
02.12.155
Reprocessing Instructions
Use only REBOTEC spare parts and accessories to ensure the proper and safe functioning of the
device.
1
2
3

REBOTEC / BA-Nr.: 02.04.008/2021-08-A01
- 11 -
EN
15.Drawing & dimensions
No.
Designation
Type XS / Di-
mensions in
mm
Type S / Di-
mensions in
mm
Type M / Di-
mensions in
mm
Type L / Di-
mensions in
mm
a1
Height min.
620
700
680
790
a2
Height max.
705
805
875
980
b
Width
565
565
625
625
c1
Length (standard)
440
440
510
510
c2
Length (with 2 castors)
410
410
460
460
d1
Inner diameter of foot capsule
30
30
30
30
d2
Front castor diameter
75
75
75
75
e
Inner width
340
340
400
400
bxc1
Floor space (standard)
565 x 440
565 x 440
625 x 510
670
bxc2
Floor space (with 2 castors)
565 x 410
565 x 410
625 x 460
625 x 460
Dimensions and weights may vary depending on the equipment. There might be minor deviations due
to production tolerances. Subject to change without notice.

REBOTEC / BA-Nr.: 02.04.008/2021-08-A01
Read this User Manual before using the device for the first time and keep it at hand for the
user as well as for future use and subsequent sales.
EN
REBOTEC®
Rehabilitationsmittel GmbH
D-49610 Quakenbrück, Artlandstr. 57- 59
Telephone: [phone]
Fax: [phone]
Web:
www.rebotec.de
Email:
[email protected]
EN