Rebotec YANO-Walker User manual

REBOTEC®Rehabilitationsmittel GmbH
DE-49610 Quakenbrück, Artlandstr. 57- 59
Telephone: [phone]-
Fax: [phone]
Web: www.rebotec.de
BA-Nr.: 02.05.133/2021-08-A01 Email: [e-mail]
Read this User Manual before using the device for the first time and keep it at hand for the
user as well as for future use and subsequent sales.
EN
User Manual
Walking frames
Figure similar
Yano-Walker
188.99.10
150 kg

REBOTEC / BA-Nr.: 02.05.133/2021-08-A01
- 2 -
EN
Table of contents
Walking frames .......................................1
1. Product description .......................3
1.1. Introduction .............................................3
2. Features ..........................................3
2.1. Intended purpose ....................................3
2.2. Conditions of use....................................3
2.3. Storage & transport.................................3
2.4. Equipment & functions...........................3
2.5. Packaging ................................................4
2.6. Disposal ...................................................4
3. Symbols & nameplates..................4
4. Safety instructions.........................4
5. Incident reporting...........................5
6. Warranty..........................................5
6.1. Complaint.................................................5
7. Reuse, lifetime................................5
8. Scope of delivery............................5
9. Setting up for use...........................6
9.1. Setting up the walker..............................6
9.2. Adjusting the handle height...................6
9.3. Adjusting the forearm length.................6
9.4. Adjusting the armrest angle...................6
10.Product data ...................................7
11. Operation of the product ...............7
11.1. Prepare for operation..............................7
11.2. Pushing the product ...............................7
11.3. Braking system........................................7
11.4. Folding of the product ............................7
12. Troubleshooting.............................7
13. Care and maintenance...................7
13.1. Cleaning and care ...................................7
13.2. Maintenance............................................ 8
14. Spare parts & accessories.............9
15. Drawing & dimensions.................10

REBOTEC / BA-Nr.: 02.05.133/2021-08-A01
- 3 -
EN
1. Product description
Figure shows:
A
Front wheel bracket
B
Rear wheel bracket
C
Handlebar
D
Front wheel with parking brake
E
Rear wheel with parking brake
F
Star knob screw, height adjustment
G
Folding device/snap lock
H
Standard handle
I
Forearm support
J
Nameplate
1.1.Introduction
•The product described here is a medical device of
risk class I according to (EU) 2017/745 MDR.
•In this user manual, you will find information on the
safe and proper initial operation, use, maintenance
and care of this product.
•Carefully read this user manual before using the
device. Follow the safety instructions and act ac-
cordingly.
2. Features
2.1.Intended purpose
•The product is used for support and relief in case
of restrictions of the lower extremities. It allows the
user to pursue their desire for mobility. There must
be sufficient upper body musculature for safe use.
Use with restrictions at the hands is possible. Per-
sons with sensory impairments may not be able to
use this item.
Specification:
•Maximum user weight: 150 kg
•Height adjustable
•Can be used by patients with rheumatism/arthritis
in the hands
•Indoor use
Indication
•Impairment of mobility in the case of damage to lo-
comotive/balance system with sufficiently pre-
served walking ability/coordination, if the use of
other walking aids is insufficient
•To maintain/promote/secure walking; additional
support for everyday activities.
•If used indoors, care must be taken to ensure suf-
ficiently spacious living conditions.
2.2.Conditions of use
•Temperature range: -10°C to 35°C; direct radiant
heat on the product must be avoided.
•Relative humidity: 40% to 85%. Outside of these
conditions, the product must only be used for a
short time.
•Folding for transport or storage is possible.
•This product may not be used to transport heavy
objects.
•There must be a flat surface of sufficient size for
the stool to be placed on. See 15.
2.3.Storage & transport
•Temperature range: 5 °C to 25 °C; direct radiant
heat on the product must be avoided.
•Store the product in dry rooms with a humidity of
up to 65%.
•The shower should be designed so that there is a
flat surface of sufficient size.
2.4.Equipment & functions
•Foldable
A
B
C
D
F
E
G
H
I
J

REBOTEC / BA-Nr.: 02.05.133/2021-08-A01
- 4 -
EN
•Parking brake
•Can be height-adjusted to 10 positions
2.5.Packaging
•We recommend you keep the packaging for a later
transport.
•Dimensions: 780 mm x 480 mm x 840 mm
2.6.Disposal
•Disposal and recycling of used products and pack-
aging must be carried out in accordance with cur-
rently valid regulations. Please contact a disposal
company for further information.
•The Infection Protection Act must be observed.
•Please observe any labels and information on
packaging material and act accordingly.
3. Symbols & nameplates
Figure similar.
The nameplate must not be removed!
For ordering spare parts and processing
complaints, the device name, serial number and
year of manufacture will be required.
Symbol
Meaning
Symbol
Meaning
Read the
manual!
Year of
manufac-
ture Device
Serial num-
ber
Important
information!
Article num-
ber
Maximum
user weight
in kg
Care in-
structions
Mainte-
nance in-
structions
Applicable
for indoor
use only.
Manufac-
turer
Visual sig-
nal
Language
Symbol
Meaning
Symbol
Meaning
Read the
User Man-
ual!
Do not dis-
pose of as
household
waste.
Product complies with (EU) 2017/745
MDR
Caution!
Observe the safety instructions
Unique Device Identifier
(Data: GTIN / LOT (SN) / year of man-
ufacture)
Medical device label
This product is a medical device.
4. Safety instructions
Please observe the following safety in-
structions:
•Before using the device for the first time, the User
Manual must be read completely in order to avoid
damage caused by fault operation or hazards.
•Before each use, check the device for visible dam-
age or deficiencies.
•In case of malfunctions or damage of any kind, the
device must not be used.
Caution: Danger of falling!
•Be sure to check the following aspects before use:
Stability of the product.
Function of the brakes.
Proper locking of the folding mechanism.
Tight fit of the star knob nuts.
•Only use the product if completely assembled.
•Do not slump carelessly on the product.
•Only use the height adjustment in the holes pro-
vided for it.
•Avoid using the product on slippery or uneven
ground.
•Make sure that least 2 brakes are always in locked
position before using the product. Only release the
brakes after you are able to stand stably.
•Do not start walking or pushing until you are stand-
ing upright and have grasped the handles with both
hands.
•Always walk within the product frame and do not
push it too far in front of you, otherwise there is an
increased risk of falling due to incorrect loading.
EN

REBOTEC / BA-Nr.: 02.05.133/2021-08-A01
- 5 -
EN
•Users who are prone to uncontrolled actions or
movements must be supervised when using the
product.
Caution: Danger of slipping!
•Do not grasp the handles with wet hands, as you
could slip and lose your grip.
Caution: Danger of tipping over!
•Avoid walking on steep inclines or declines; other-
wise you could lose control of the rolling product.
•Do not use the product on stairs or steps.
•Do not hang any objects on the product.
•Do not lean too far over the handlebar.
•Avoid excessively leaning over the product.
Caution: Danger of breakage!
•Observe the permitted user weight (2.1).
•The product is not a means of transport for heavy
objects.
•Do not climb onto or stand on the product.
•The product is not suitable for passenger transport.
•Do not expose the product to great temperature
fluctuations (2.2 & 2.3).
Caution: Danger of pinching or catching!
•There is a risk of pinching or catching on all moving
parts of the product. Be especially careful when un-
folding and folding that no body parts or objects are
caught between the moving parts.
Caution: Risk of injury!
•There is a risk of injury with surface temperatures
> 40 °C. Therefore, do not expose the product to
high temperatures (e.g. sunlight, radiators, hot wa-
ter). Allow the product to cool before use.
If the product is used by patients with insen-
sitive skin (no temperature perception or
skin damage), a heat check (e.g. touching with the
back of the hand) must be carried out by the nursing
staff.
5. Incident reporting
•Serious incidents in connection with the product
must be reported immediately to the manufacturer
and BfArM.
BfArM: www.bfarm.de/DE
▪Use the reporting functions and provided
forms.
Manufacturer: [e-mail]
6. Warranty
•For this product the manufacturer grants a war-
ranty of 12 months. Compliance with the general
terms and conditions(www.rebotec.de/agbs), as
well as the intended use, are a basic prerequisite.
The statutory warranty provisions shall apply.
•Unauthorised modifications to this product will void
the product’s conformity and the warranty.
6.1.Complaint
•Please contact us before returning the product.
•To reduce transport damage, use the original pack-
aging if possible.
•The Infection Protection Act must be complied with.
Please make sure that the product does not
pose a risk of infection when returned.
Enclose the supplied information sheet on safety
with the product.
Costs may incur for returns that are not marked
non-objectionable.
7. Reuse, lifetime
•The product is suitable for reuse. How often the
product can be reused depends on the frequency
and nature of use.
•Before reuse, the product must be reprocessed hy-
gienically and the technical and functional safety
and reliability of the product must be checked and
restored if necessary. See 13.
For more detailed information, please see the
reprocessing instructions (02.12.155) and the
maintenance instructions (02.11.149).
The documents can be downloaded from the fol-
lowing link.
▪www.rebotec.de/downloads
•When used as intended, the product has a lifetime
of 3 years. The effective lifetime may vary depend-
ing on the frequency and intensity of use and the
general condition.
8. Scope of delivery
•Yano-Walker
User manual (02.05.133)
Standard handle
Ellipse handle
Spade handle

REBOTEC / BA-Nr.: 02.05.133/2021-08-A01
- 6 -
EN
•The reprocessing and maintenance instructions
can be ordered or viewed and downloaded at
www.rebotec.de/downloads.
9. Setting up for use
•The product has been carefully inspected in the
factory for freedom from defects and complete-
ness. Please check the product for any possible
damage which may have occurred during transport
and for completeness of the scope of delivery upon
receipt. Assembly or adjustment shall be carried
out by the specialist dealer.
9.1.Setting up the walker
•Remove the handle bar and the wheel frame from
the box.
•Place the walker on its wheels and unfold it com-
pletely by pressing down the rear wheel bracket (C)
until the snap locks (D) are engaged. Check that
the walker is fully unfolded and the folding lock is
engaged.
•Insert the handle bar (A) with the forearm supports
into the front wheel fork (B).
9.2.Adjusting the handle height
•The height of the forearm supports can be ad-
justed to your body size via the height-adjustable
handle bar.
•Loosen the two star knob screws (A) and pull
them out.
•Move the handle bar (B) to the desired height. Align
the lock holes to be flush, then insert and tighten
the star knob screws.
9.3.Adjusting the forearm length
•There are three setting options for adjusting the
forearm length (A= regular/B= short/C= long)
•Loosen the cap nut with an open-end wrench
SW10, unscrew and pull out the screw completely.
•Select the adjustment, insert the screw and screw
the cap nut tight again.
9.4.Adjusting the armrest angle
•The position of the forearm can be adjusted by
changing the inclination of the armrest
•Slightly loosen the screw (1) on the clamping bush
(2) of the support fork with a 4 mm Allen key.
•Move the armrest to the desired position by hand
(max. inclination can be adjusted up to the stop (B))
•Tighten the screw (1) again.
1
2
C
D
A
B
A
B
B
A
C

REBOTEC / BA-Nr.: 02.05.133/2021-08-A01
- 7 -
EN
10. Product data
•We reserve the right to make technical develop-
ments and improvements with respect to the de-
sign shown in this User Manual.
•See 15.
Characteristic
Value
Yano-Walker
2.
Product weight*
10.6 kg
3.
Total weight*
13.4 kg
Skin compatibility
DIN EN 10993-1/-5
Flammability**
DIN EN 1021-1/-2
*Without accessories.
**Flame retardant: For products made of PUR ma-
terial.
11. Operation of the product
•Before use, it must be ensured that the product is
in proper condition. If defects or malfunctions are
evident, the product must not be used. Have the
defects corrected by a specialist dealer before use.
11.1. Prepare for operation
•The product must be unfolded and the latches en-
gaged. Check that the parking brakes are securely
in place and that they function properly.
11.2. Pushing the product
•Always walk inside the frame of the walker and do
not push it too far in front of you.
•Do not lean too far over the forearm supports.
•When using the product indoors, try to avoid collid-
ing with door thresholds and pay attention to loose
or slippery floor coverings.
•While walking, all four parking brakes must be re-
leased.
11.3. Braking system
Improper use of the brake can cause unsafe
situations and damage (increased wear, lim-
ited function).
Parking brake (1)
•The product should not be moved if the brakes are
applied or the wheels are locked.
•Pressing down (A) the red lever locks the wheel
and pressing up (B) on the lever releases the
brake. The wheel can be rotated 360 degrees
when not locked.
11.4. Folding of the product
Unfolding
•Place the product on its wheels and press down the
frame. The folding lock must be completely en-
gaged.
Folding
•Pull out the two snap locks completely and pull the
tube bracket (B) towards you
12. Troubleshooting
Fault
Potential
cause
Remedy
Wheels turn
sluggishly
Deposits
Cleaning,
checking regu-
larly
Engagement
bolts
are jammed
Deposits
Cleaning,
replace en-
gagement
bolts
No braking
function
Defective func-
tion
Maintenance!
Replace the
product
Wheel set
bent
Hitting an ob-
stacle
Maintenance!
Replacement
Visible
cracks or
breaks
Various
causes
Maintenance!
Replacement
Forearm sup-
port defective
Wear and tear
Replacement
of defective
parts
Loose screw
connections
Wear and tear
Check connec-
tions and re-
place if neces-
sary
13. Care and maintenance
13.1. Cleaning and care
The product can be cleaned using a mild
conventional cleaning and disinfecting
B
A

REBOTEC / BA-Nr.: 02.05.133/2021-08-A01
- 8 -
EN
agent. After cleaning, wipe the product with a clean,
moist cloth and then wipe it dry with a dry cloth.
•Do not use scouring agents or cleaning agents with
aggressive ingredients (acids, thinners), as well as
hard cleaning objects (brushes), as otherwise the
surfaces may be damaged or deposits may form
on the materials.
•The product is suitable for manual cleaning and
disinfection. Please observe the reprocessing in-
structions (01.12.155).
13.2. Maintenance
•Wear and tear that is not recognised in time and/or
improper handling, as well as irregular or no
maintenance may result in accidents.
For safety reasons, the product must be pro-
fessionally maintained at least once a year.
Check product for visible damage (cracks, breaks,
loose parts)
•Check stability before use
Maintenance/inspection scope
•Maintenance should include the following inspec-
tion work and should be documented.
•Visual inspection for damage, wear and corrosion
of all frame parts such as:
•Frame
•Handlebar
•Forearm supports
•Front wheels (replace in pairs)
•Rear wheels (replace in pairs)
•Check all connecting elements (screws, nuts) for
completeness, fit and function
•Function of the folding mechanism
•Function of the height adjustment mechanism
•Function of the brakes (parking brake)
•In the event of damage and/or repairs, contact your
authorised dealer immediately.
•Never attempt any unauthorised modifications or
conversions to the product. These may impair the
safety and proper functioning of the device. In
such cases, REBOTEC will not assume any lia-
bility.
•Only use OEM spare parts for repairs. See 6.
•After maintenance or repair work has been carried
out, we recommend you clean the product before
using it again.
•Please note section 7& 14.
•Please observe the maintenance instructions
(02.11.149).

REBOTEC / BA-Nr.: 02.05.133/2021-08-A01
- 9 -
EN
14. Spare parts & accessories
No.
Art. no.
Designation
1
288.10.45
Front wheel with parking brake, complete set
2
288.10.46
Rear wheel with parking brake, complete set
3
853.06.40
Star knob, complete
4
213.10.36
Padding for armrest, black
-
164.30.00
Walking aid holder set
-
02.05.133
User Manual
-
02.11.149
Maintenance Instructions
Use only REBOTEC spare parts and accessories to ensure the proper and safe functioning of the
device.
1
2
3
4

REBOTEC / BA-Nr.: 02.05.133/2021-08-A01
- 10 -
EN
15. Drawing & dimensions
No.
Designation
Type S / Dimensions in mm
a1
Height min.
980
a2
Height max.
1160
b
Width
680
c
Length
720
d
Front castor diameter
125
e
Rear castor diameter
125
f
Total length/armrest
260
bxc
Floor space
680 x 720
Dimensions and weights may vary depending on the equipment. There might be minor deviations due
to production tolerances. Subject to change without notice.

REBOTEC / BA-Nr.: 02.05.133/2021-08-A01
- 11 -
EN

REBOTEC / BA-Nr.: 02.05.133/2021-08-A01
Read this User Manual before using the device for the first time and keep it at hand for the
user as well as for future use and subsequent sales.
EN
REBOTEC®
Rehabilitationsmittel GmbH
D-49610 Quakenbrück, Artlandstr. 57- 59
Telephone: [phone]
Fax: [phone]
Web:
www.rebotec.de
Email:
[email protected]
EN