Reliable F3-80 Dry Pendent User manual

Reliable Automatic Sprinkler Co., Inc., 103 Fairview Park Drive, Elmsford, New York 10523
Model F3-80 Dry
K8.0 (115 metric)
Standard-Response,
Standard Spray Sprinklers
Bulletin 060 March 2022
Bulletin 060 March 2022
Features
1. Available in the following configurations:
• Pendent with standard escutcheon
• Pendent with Model HB extended escutcheon
• Pendent with Model FP recessed escutcheon
• Concealed Pendent with Model CCP cover plate
• Horizontal Sidewall with Standard escutcheon
• Horizontal Sidewall with Model HB extended es-
cutcheon
• Horizontal Sidewall with Model FP recessed es-
cutcheon
2. Available with 1” NPT or ISO7-1R1 inlet fitting.
3. Sprinklers, escutcheons, and cover plates are avail-
able in a wide variety of standard and special appli-
cation finishes.
4. White polyester and black polyester finish sprinklers
are cULus Listed as Corrosion Resistant.
Product Description
Model F3-80 Dry sprinklers are standard-response,
standard coverage sprinklers with a nominal K-Factor of
8.0 (115 metric). Model F3-80 Dry sprinklers all use a 5
mm glass bulb operating element. See the Temperature
Ratings table in this Bulletin for available temperature rat-
ings. Model F3-80 Dry sprinklers are intended for installa-
tion on wet-pipe, dry-pipe, or preaction sprinkler systems
in accordance with NFPA 13.
Model F3-80 Dry sprinklers are available with a variety
of escutcheon options as illustrated in Figs. 1 through
3 and Figs. 5 through 7. In addition, Model F3-80 Dry
Pendent sprinklers are also available with the Model CCP
conical concealed cover plate as illustrated in Fig. 4.
Available sprinkler, escutcheon, and cover plate finishes
are identified in the Finishes table in this Bulletin. The
Model FP escutcheon, and Model CCP cover plate are
the only recessed escutcheons and cover plate listed for
use with Model F3-80 Dry sprinklers; the use of any other
recessed escutcheon or cover plate with Model F3-80
Dry sprinklers will void all guarantees, warranties, listings
and approvals.
Inlet fittings are available with 1” NPT or ISO 7-1R1
threads.
See the Available Configurations, Listings, and Approv-
als table in this Bulletin for further information on Model
F3-80 Dry sprinklers.
CCP Cover Plate
(See Fig. 4)
FP Recessed Escutcheon
(See Fig. 3)
Standard Escutcheon
(See Fig. 1)
HB Escutcheon
(See Fig. 2)
Recessed FP
Horizontal Sidewall
(See Fig. 7)
Horizontal Sidewall / HB
(See Fig. 6)
Horizontal Sidewall
(See Fig. 5)

2.
Available Configurations, Listings, and Approvals
Sprinkler
Model
Escutcheon or
Cover Plate
Available Length
(See Figs. 1 - 7)
Listings and
Approvals(1)
Inlet
Threads
Sprinkler Identification
Number (SIN)
F3-80 Dry
Pendent
Standard
Escutcheon
2” to 36”
(50 to 914 mm)
cULus, NYC
1” NPT
or
ISO7-1R1
RA6012
HB Extended Escutcheon 3-1/2” to 36”
(90 to 914 mm)
FP Recessed Escutcheon
CCP Cover Plate
F3-80 Dry
Horizontal
Sidewall
Standard Escutcheon 2” to 36”
(50 to 914 mm) cULus(2), NYC(2)
1” NPT
or
ISO7-1R1 RA6032 HB Extended Escutcheon 3-1/2” to 36”
(90 to 914 mm)
FP Recessed Escutcheon
(1) For available temperature ratings and finishes see the Temperature Ratings and Finishes tables, respectively, in this Bulletin.
(2) cULus Listing and NYC for Light Hazard (existing) and Ordinary Hazard only.
Listing and Approval Agencies
See the Available Configurations, Listings, and Approvals table in this Bulletin for listings and approvals applicable to
each available configuration.
1. Listed by Underwriters Laboratories, Inc. and UL Certified for Canada (cULus)
2. Permitted in New York City based on UL Listing per Local Law 33/2007 (NYC)
Technical Data
Maximum Listed and Approved Working Pressure: 175 psi (12 bar)
Nominal K-Factor: 8.0 gpm/psi1/2 (115 L/min/bar1/2)
Temperature
Classification Glass Bulb Color Sprinkler Temperature Rating
Cover Plate
Temperature Rating
Maximum Ceiling
Temperature
Listings and
Approvals(1)
Ordinary Orange 135°F (57°C) 135°F (57°C) 100°F (38°C)
cULus, NYC
Red 155°F (68°C)
Intermediate Yellow 175°F (79°C) 165°F (74°C) 150°F (66°C)
Intermediate Green 200°F (93°C) 165°F (74°C) 150°F (66°C)
High Blue 286°F (141°C) None 225°F (107°C)
165°F (74°C) 150°F (66°C)
(1) For listed and approved sprinkler, escutcheon, and inlet configurations see the Available Configurations, Listings, and Approvals table in this Bulletin.
Finish Notes:
1. Finishes vary with type of trim selected. See table provided with each sprinkler detailed for nish combinations.
2. Paint or any other coating applied over the factory nish will void all approvals and warranties.
3. Other nishes and colors may be available on special order. Consult your Reliable sales representative for details.
4. For Standard Model HB, and Model F1 trims, both components of escutcheon are nished.
5. For Model FP and CCP trims, only the trim ring and cover plate are nished. The threaded sprinkler cup is unnished.

3.
COMDRYDET1-A
System Fitting
Inlet Fitting
1-5/8"
[41mm]
3" [76mm]
DIA.
2-1/8"
[54mm] Dia.
Hole in Ceiling
1/2" [12mm]
Nominal Protrusion
"A" Dimension Sprinkler Can
Escutcheon
Ceiling
1" [25mm]
Escutcheon
Adjustment
1/2" [12mm]
Escutcheon Adjustment
Nominal
Escutcheon
Position
1/2" [12mm]
Note: The sprinkler can protrudes 1/2” when escutcheon is in nominal position. Escutcheon adjustment provides -1/2” (-12mm) to +1” (25mm)
“A” dimension adjustment range.
Fig. 1
Model F3-80 Dry Pendent Sprinkler with Standard Escutcheon (SIN RA6012)
“A” Dim. 2” to 36” (51mm to 914mm) in 1/4” (6mm) increments
Finish Combinations: Standard Escutcheon
Sprinkler Escutcheon(3)(4)
Bronze Polished Stainless
Bronze Laquered Brass
Chrome Polished Stainless
White Polyester(1) White Polyester
Black Polyester(1) Black Polyester
Custom Color Polyester(1) Custom Color Polyester
Electroless Nickel PTFE(1) Polished Stainless
Wax(1)(2) Polished Stainless
Lead(1) Polished Stainless
Wax over Lead(1)(2) Polished Stainless
Notes:
1. UL Listed as Corrosion Resistant.
2. Clear wax used on ordinary temperature rated sprinklers;
brown wax used on intermediate temperature rated
sprinklers. Brown wax may be used on high temperature
rated sprinklers where the ambient temperature does not
exceed 150°F (66°C).
3. Escutcheons do not carry corrosion resistant
listings.
4. Base material is 316 stainless steel unless noted.

Model F3-80 Dry Pendent Sprinkler with Model HB Extended Escutcheon (SIN RA6012)
“A” Dim. 3½” to 36” (89mm to 914mm) in 1/4” (6mm) increments
Note: The sprinkler can protrudes 1¼” when escutcheon is in nominal position. Escutcheon adjustment provides -½” (-12.7mm) to +½” (+12.7mm)
“A” dimension adjustment range.
Fig. 2
4.
Finish Combinations: HB Escutcheon
Sprinkler Escutcheon(3)(4)
Bronze Chrome
Chrome Chrome
White Polyester(1) White Polyester
Black Polyester(1) Black Polyester
Custom Color Polyester(1) Custom Color Polyester
Electroless Nickel PTFE(1) Stainless Steel
Wax(1)(2) Chrome
Lead(1) Stainless Steel
Wax over Lead(1)(2) Stainless Steel
Notes:
1. UL Listed as Corrosion Resistant.
2. Clear wax used on ordinary temperature rated sprinklers;
brown wax used on intermediate temperature rated
sprinklers. Brown wax may be used on high temperature
rated sprinklers where the ambient temperature does not
exceed 150°F (66°C).
3. Escutcheons do not carry corrosion resistant listings.
4. Base material is cold rolled steel unless noted.

Note: Do not install the Model F3-80 Dry Pendent sprinkler with the Model FP escutcheon in ceilings which have positive pressure in the space
above.
Fig. 3
5.
Model F3-80 Dry Pendent Sprinkler with Model FP Recessed Escutcheon (SIN RA6012)
“A” Dim. 31/2” to 36” (89mm to 914mm) in 1/4” (6mm) increments
Finish Combinations: FP Recessed
Sprinkler(1) Escutcheon(3)(4)
Bronze Brass
Chrome Chrome
White Polyester(2) White Polyester
Black Polyester(2) Black Polyester
Custom Color Polyester(2) Custom Color Polyester
Electroless Nickel PTFE(2) Stainless Steel
Notes:
1. Cup for FP Recessed is unnished galvanized steel except
electroless nickel PTFE sprinklers which are provided with a
stainless steel cup
2. UL Listed as Corrosion Resistant.
3. Escutcheons do not carry corrosion resistant listings.
4. Base material is cold rolled steel unless noted.

Model F3-80 Dry Pendent Sprinkler with Model CCP Cover Plate (SIN RA6012)
“A” Dim. 31/2” to 36” (89mm to 914mm) in 1/4” (6mm) increments
Note: Do not install the Model F3-80 Dry Pendent sprinkler with the Model CCP cover plate in ceilings which have positive pressure in the space
above.
Fig. 4
6.
Finish Combinations: CCP Concealed
Sprinkler(1) Cover Plate(2)
Bronze
White Polyester
Chrome Bright
Chrome Dull
Bright Brass
Unnished Bronze
Custom Color
Notes:
1. Cup for CCP Concealed is unnished galvanized steel.
2. Cover plates do not carry corrosion resistant listings.

Note: The sprinkler can protrudes ¼” when escutcheon is in nominal position. Escutcheon adjustment provides -¼” (-6mm) to +1¼” (+32mm) “A”
dimension adjustment range.
System Fitting
3"
[76mm]
Wall
1" [25mm]
Escutcheon
Adjustment
2-3/32"
[53mm]
Ceiling
1/2" [12mm]
Escutcheon Adjustment
2-1/8"
[54mm] Dia.
Hole in Wall
4" [100mm] Min.
12" [300mm] Max.
COMDRYDET6-80-A
Inlet Fitting
"A" Dimension
5/8" [16mm]
Nominal Escutcheon Position
Sprinkler Can
1/2" [12mm]
1/2" [12mm] Nominal Protrusion
Fig. 5
7.
Model F3-80 Dry Horizontal Sidewall Sprinkler with Standard Escutcheon (SIN RA6032)
“A” Dim. 2” to 48” (51mm to 1219mm) in 1/4” (6mm) increments for 1” connections or
2” to 36” (51mm to 914mm) in 1/4” (6mm) increments for 3/4” connections
Finish Combinations: Standard Escutcheon
Sprinkler Escutcheon(3)(4)
Bronze Polished Stainless
Bronze Laquered Brass
Chrome Polished Stainless
White Polyester(1) White Polyester
Black Polyester(1) Black Polyester
Custom Color Polyester(1) Custom Color Polyester
Electroless Nickel PTFE(1) Polished Stainless
Wax(1)(2) Polished Stainless
Lead(1) Polished Stainless
Wax over Lead(1)(2) Polished Stainless
Notes:
1. UL Listed as Corrosion Resistant.
2. Clear wax used on ordinary temperature rated sprinklers;
brown wax used on intermediate temperature rated
sprinklers. Brown wax may be used on high temperature
rated sprinklers where the ambient temperature does not
exceed 150°F (66°C).
3. Escutcheons do not carry corrosion resistant
listings.
4. Base material is 316 stainless steel unless noted.

8.
Model F3-80 Dry Horizontal Sidewall Sprinkler with Model HB Escutcheon (SIN RA6032)
“A” Dim. 31/2” to 48” (89mm to 1219mm) in 1/4” (6mm) increments for 1” connections or
3½” to 36” (89mm to 914mm) in 1/4” (6mm) increments for 3/4” connections
Note: The sprinkler can protrudes 1¼” when escutcheon is in nominal position. Escutcheon adjustment provides -½” (-12.7mm) to +½” (+12.7mm)
“A” dimension adjustment range.
Fig. 6
Finish Combinations: HB Escutcheon
Sprinkler Escutcheon(3)(4)
Bronze Chrome
Chrome Chrome
White Polyester(1) White Polyester
Black Polyester(1) Black Polyester
Custom Color Polyester(1) Custom Color Polyester
Electroless Nickel PTFE(1) Stainless Steel
Wax(1)(2) Chrome
Lead(1) Stainless Steel
Wax over Lead(1)(2) Stainless Steel
Notes:
1. UL Listed as Corrosion Resistant.
2. Clear wax used on ordinary temperature rated sprinklers;
brown wax used on intermediate temperature rated
sprinklers. Brown wax may be used on high temperature
rated sprinklers where the ambient temperature does not
exceed 150°F (66°C).
3. Escutcheons do not carry corrosion resistant listings.
4. Base material is cold rolled steel unless noted.

9.
Model F3-80 Dry Horizontal Sidewall Sprinkler with Model FP Recessed Escutcheon (SIN RA6032)
“A” Dim. 31/2” to 48” (89mm to 1219mm) in 1/4” (6mm) increments for 1” connections or
3½” to 36” (89mm to 914mm) in 1/4” (6mm) increments for 3/4” connections
Note: The sprinkler can protrudes 1/2” when escutcheon is in nominal position. Escutcheon adjustment provides -1/2” (-12mm) to +1” (25mm) “A”
dimension adjustment range.
Fig. 7
Finish Combinations: FP Recessed
Sprinkler(1) Escutcheon(3)(4)
Bronze Brass
Chrome Chrome
White Polyester(2) White Polyester
Black Polyester(2) Black Polyester
Custom Color Polyester(2) Custom Color Polyester
Electroless Nickel PTFE(2) Stainless Steel
Notes:
1. Cup for FP Recessed is unnished galvanized steel except
electroless nickel PTFE sprinklers which are provided with a
stainless steel cup
2. UL Listed as Corrosion Resistant.
3. Escutcheons do not carry corrosion resistant listings.
4. Base material is cold rolled steel unless noted.

10.
Fig. 8