RGBlink D4 User manual

● Internal YUV4:4:4 processing
● 12 Bit processing
● HDMI 2.0 compatible
● HDCP 2.X compliance
● DisplayPort 1.2 Compatible
● HDR Compatible
● 12G/6G/3G/HD/SD SDI input compatible
● 4K@60 outputs including HDMI 2.0, DisplayPort 1.2
● EDID management
● Up to 8K2K output splicing
● Independent PST,multiple pictures seamless switching
● Multiple operation mode
● Support for flip image
● Support multiple cascade control
D4
Quick Start

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] |[email protected] |www.rgblink.com
1 / 20
CONTENTS
Product Introduction...................................................................................................................................................2
Packing Configuration................................................................................................................................................. 3
Hardware Orientation................................................................................................................................................. 4
Front Panel.......................................................................................................................................................... 4
Rear Panel............................................................................................................................................................5
Menu Structure................................................................................................................................................... 6
Use Your Product.........................................................................................................................................................7
Output Setting.....................................................................................................................................................7
Input Setting......................................................................................................................................................12
Transition Setting...............................................................................................................................................13
Test Patern.........................................................................................................................................................13
View (Save&Load)............................................................................................................................................. 14
System............................................................................................................................................................... 15
Tech Support......................................................................................................................................................16
Factory Reset.....................................................................................................................................................16
Scale Button.......................................................................................................................................................17
PIP Button..........................................................................................................................................................17
DIMMER Button................................................................................................................................................ 18
HDR Button........................................................................................................................................................18
CONTACT INFORMATION...........................................................................................................................................19

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] |[email protected] |www.rgblink.com
2 / 20
Product Introduction
With standard any in and any out, D4 is so much more than 4K scale.
With multiple output modes, D4 is a very flexible solution accross a range of applications
Whether for scaling, presentation switching, 4K distribution or broadcast.
Truly an All-In-One solution, D4 accept a wide range of input signals in a huge array of formats. Inputs can be
converted, scaled, transcoded to standard to HDMI 2.0outputs or output to optional ports including
DP1.2,12G/6G/3G/HD/SD SDI, Fiber port and HDBaseT.
With a built-in dual channel 4k scaler, D4 provides 12bit interface connection, with EDID management,HDCP2.X
compliant and YUV4:4:4 10 bit color reproduce.
Based on the flexible modular structure, D4 can be expanded to more connection or any connection in need,
but not features only as a standard unit, besides its embedded and de-embeded audio processing capacity.
This is the typical diagram for switcher and presentation application with multiple 4K/2K connection.
System Connection Diagram
D4 System Connection Diagram

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] |[email protected] |www.rgblink.com
3 / 20
Packing Configuration
Note:
AC Power Cable supplied as standard according to destination market.
Upgrade tool package and user manual are stored in the USB disk, please keep it.
AC Power
Cord
USB Cable
HDMI
Cable*2
Anti-Static
Bag
USB Disk

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] |[email protected] |www.rgblink.com
4 / 20
Hardware Orientation
Front Panel
Button Instruction
Number button 0~9, use for
scale, crop, zoom and custom
setting
Input signal source button
Show operation menu items
Test pattern button
Layer selection button
Short cut button to open Effect menu
Confirm and adjust OLED menu
Scale button
Menu and back button
Dimmer button
Picture in Picture Button
Freeze Current Image
High Dynamic Rang Image
button
Switch from preset to program with
transition effect

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] |[email protected] |www.rgblink.com
5 / 20
Rear Panel
Chassis Module Structure
1
2 input module slots, support DP1.2,12G
SDI HDMI 2.0 and 3G SDI Input Module
( The bottom slot support HDR)
4
Genlock In/Loop
2
2 standard HDMI output (HDR Supported)
5
Communication connectors including:1 LAN
port, and 1 USB-B
3
1 output module slot, support 4K HDMI,DP
12G SDI and 3G SDI output modules
6
Power switch
7
Power socket

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] |[email protected] |www.rgblink.com
6 / 20
Menu Structure

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] |[email protected] |www.rgblink.com
7 / 20
Use Your Product
Output Setting
D4 system is default in English, after Initializing, the device will enter the main interface.
Press MENU button and enter the the menu item. Rotate the knob and select Output
In Output sub-menu, there are items as follows:
1. Output Info: output resolution,signal type, greyscale,color space etc
Input >>
>Output >>
Customize Format >>
View >>
Transition >>
Output Info >>
Output Format >>
Genlock >>
Effects >>
Output Adjust >>
Output 1: HDMI 2.0
3840x2160@50
HDMI Mode HDMI
Bits 8Bits>>
Color Space YUV
Audio >>

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] |[email protected] |www.rgblink.com
8 / 20
2. Output Format: users can rotate the knob to choose desired output resolution from 60 types of normal
resolutions up to 4096x2160@60
3. Custom Format
In the first page of MENU items, there is Customize Format available.
Users can custom output resolution by input numbers on the front panel.
3840x2160@50 I
Bits 8Bits>>
Color Space YUV
No HDR Support
_____________________
Output 2: HDMI2.0
3840x2160@50
HDMI Mode HDMI
Bits 8Bits>>
Color Space YUV
No HDR
_____________________
Output 3: DP 1.2
Output Format
3840x2160@50
Input >>
Output >>
>Customize Format >>
View >>
Transition >>
Customize Format:
>3840x2160@24

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] |[email protected] |www.rgblink.com
9 / 20
Turn the knob to resolution line and press the knob “>” (arrow )change to “*” (star ) put in the numbers for
width value, then press the knob to confirm the number.
Put in the numbers for height and frame rate in the same way. For example setting resolution 2560x1152@60,
here are the steps:
Note: The number buttons turning green indicate that users can use button to key in numbers.
4. Genlock: users can turn on or off Genlock and set Genlock Format.
Users can turn the knob to choose Genlock Y or Frame lock and choose Genlock Resolutions.
5. Output Adjust: users can turn on HDR adjust here.
Customize Format:
*2560x1152@60
Customize Format:
*2560x1152@00
Customize Format:
*2560x0000@00
Output 2:
HDMI Mode HDMI
Bits 8Bits
Color Splace YUV
Output HDR ON
Output 1:
HDMI Mode HDMI
Bits 8Bits
Color Splace YUV
Output HDR ON
>Genlock OFF
Genlock Format
3840x2160@50
Customize Format:
*3840x2160@24

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] |[email protected] |www.rgblink.com
10 / 20
Note: HDR require input source device and processing device and display device, all need to support HDR
otherwise the HDR adjust cann’t work.
Here is contrast example of before and after HDR adjust
HDMI Mode HDMI
Before HDR ON After HDR ON
6. Effects: users can set output image effects here. To open up Effect menu, just press Effect button on
the front panel.
Layer: to choose Layer A or Layer B as the main picture for PIP and to swap layer.
Brightness: ranging from -1024 to 1024, users can not only adjust the overall brightness but also the brightness
of R,G,B, each ranging from -1024 to 1024
Contrast:range from 0-399
Chroma:range from 0-399
Black&White: On/Off
>Brightness 1024
Brightness R 1024
Brightness G 1024
Brightness B 1024
Layer N/A
Brightness >>
Contrast >>
Chroma >>
Black&White OFF
Hue 180
Color Temp 6500K
Gamma Gamma 1.0
H Sharpness 0
V Sharpness 0

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] |[email protected] |www.rgblink.com
11 / 20
Hue: rang from -180 to 180
Color Temp:rang from 6500K to 9300K
Gamma: select from Gama 1.0, Gamma 1.8, Gamma 2.2, Gamma 2.6
H Sharpness: adjust horizontal sharpness, rang from -10 to 10
V Sharpness:adjust vertical sharpness, rang from -10 to 10
Noise Reduction: 6 noise reduction made available.Each rang from 0 to 3.
Flip V: vertical flip On or Off
Flip H: horizontal flip, on or Off
Reset:On or Off, select on to reset all above parameter.
7. Audio: select the output port for audio, users can choose Auto or output from Port 1 to Port 4.
Noise Reduction >>
Flip V OFF
Flip H OFF
Reset OFF
Horizontal NR 0
Vertical NR 0
Temporal 0
Block NR 0
Mosquito NR 0
Combing NR 0
*Audio Port 2

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] |[email protected] |www.rgblink.com
12 / 20
Input Setting
1. Input Info: shows the input info of each input port as input resolution, Color Space(RGB/YUV) and HDR.
2.Sizing Adjust:
1)adjust input size and position.
2)Crop input source.
3.EDID Management: Select EDID destination port and source. Custom EDID is available.
Destination Port: select from 1 to 4
Source:RGB4K,FOLLOW,CUSTOM,RESET
Choose CUSTOM to Customize Format for input.
Input 1:
No Input
No HDR
RGB
H Size 1408
V Size 832
H Pos 0
V Pos 0
Reset Size OFF
MASK TOP >>
MASK BOTTOM >>
MASK LEFT >>
MASK RIGHT >>
RESET MASK
Destination Port 1
>Source: RGB4K
Customize Format:
*3840x2160@60

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] |[email protected] |www.rgblink.com
13 / 20
Transition Setting
1. Mode: to select the transition mode for for switching. Cut or Fade available.
2. Duration: the duration time of transition. If under Fade Mode, duration time range from 0.0-2.0s
Test Patern
1. Type: Users can choose OFF to disable test Pattern, or choose Pure Color or Color Bar as test pattern
2. Red,Green,Blue:RGB value for test pattern, each one range from 0 to 255
TP button on the front panel is the short cut button to open Test Pattern menu.
*Type Color Bar
Red 255
Green 255
Blue 255
Mode Cut
Duration Invalid

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] |[email protected] |www.rgblink.com
14 / 20
View (Save&Load)
1. Save To: save settings made above to Save_1,2,3...16, use knob to choose SAVE 1,2,3...16
2. Load From:load saved settings from Save_1,2,3...16, use knob to choose Load 1,2,3...16
Save To >>
Load From >>
Save To
> Save_1
Load From
> Save_1

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] |[email protected] |www.rgblink.com
15 / 20
System
1. System Info: show MCU version,Serial Number, and IP address of the device.
2. System Mode: PIP, Switch, Standard, Presentation,
3. Language 语言：To select English or Chinese .To quick switch language between Chinese and English, long
pressing MENU+SCALE buttons for 3S.
4. Lock Front Panel
System Info >>
System Mode Standard
Language 语言 ENG
Lock Front Panel >>
MCU Version 1.8
SN 0504
192.168.000.058
Lock Front Panel
Yes <OK>, No <Menu>

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] |[email protected] |www.rgblink.com
16 / 20
Tech Support
show the contact info of RGBlink
Factory Reset
Sales Hotline:
4008-592-114
After-Sale Service:
4008-592-315
[email protected]
Factory Reset
YES<OK>,NO<MENU>

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] |[email protected] |www.rgblink.com
17 / 20
Scale Button
Press Scale Button on the front panel to enter scale setting menu as follows:
1. Channel: choose from CH.1/CH.2/CH.3/CH.4
2. H SIZE: set the horizontal pixels of output image
3. V SIZE: set the vertical pixels of output image
4. Ratio: Set the scale ratio by putting in the horizontal width, the vertical height will be auto adjusted
according to the ratio of new width/old width.e.g. Set ratio as 1920 and the first width is 3840, the height will
be automatically adjusted to 1080.
5. H POS: set the horizontal position of image
6. V POS: set the vertical position of image
7. RESET: If operation is not proper, turn knob to <RESET> and start over.
PIP Button
Press PIP Button on the front panel to picture in picture setting menu as follows:
>PIP ON
Layer Layer B
V POS 0
Reset OFF
Channel CH.1
H Size 3840
V Size 2160
Ratio 3840
H Pos 0

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] |[email protected] |www.rgblink.com
18 / 20
1. PIP: select On or Off
2. Layer: select layer A or B as main picture.
DIMMER Button
Press Dimmer Button on the front panel to set Dimmer value or long pressing Dimmer button the value
can immediately skip from 0 to 128.
Dimmer range:0-128
HDR Button
Press HDR button on the front panel to activate HDR feature:
Input Port:select from Port1 , Port 2, Port 3, Port 4
In (input) HDR Support On or Off
Output Port:select from Ch.1 or Ch.2
Out(input) HDR Support On or Off
>Input Port Port2
In HDR Support ON
Output Port Ch.1
Out HDR Support ON
>Dimmer 128

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] |[email protected] |www.rgblink.com
19 / 20
CONTACT INFORMATION
Warranty:
All video products are designed and tested to the highest quality standard and backed by full 3 years parts and
labor warranty. Warranties are effective upon delivery date to customer and are non-transferable. RGBlink
warranties are only valid to the original purchase/owner. Warranty related repairs include parts and labor, but
do not include faults resulting from user negligence, special modification, lighting strikes, abuse(drop/crush),
and/or other unusual damages.
The customer shall pay shipping charges when unit is returned for repair.
Headquarter: S601~609 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province,
P.R.C
● Tel: [phone]
● Fax: [phone]
● Customer Hotline: [phone]
● Web:
~ http://www.rgblink.com
~ http://www.rgblink.cn
● E-mail: [e-mail]