Ricoh D109 Manual

S-C4L Training
1
Slide 1
D109/D110
Service Training
Product Outline
No additional notes.

S-C4L Training
2
Slide 2
Machine Appearance
By-pass tray
and duplex unit
Optional paper tray
Internal Tray
Standard Tray
Auto-Reverse
document
Feeder (ARDF)
(Option)
No additional notes.

S-C4L Training
3
Slide 3
Operation Panel
No additional notes.

S-C4L Training
4
Slide 4
Improved Over Previous Model
ARDF document feeder automatically scans
double-sided pages (optional on this model).
Color scanning ability added (for saving as data in
computers via TWAIN).
Overall performance improvement with faster
operation over previous version.
GDI Controller – (USB 2.0)
Ethernet (with NIC option for D109)
No additional notes.

S-C4L Training
5
Slide 5
GDI Controller Box (D109)
USB
Motherboard
Connection
Note that the exact shape of the production controller box may slightly vary from
the picture above – but the location of the motherboard connection and
connectivity jacks should be the same.

S-C4L Training
6
Slide 6
GDI Controller Box (D110)
Ethernet
(with NIC)
USB
Motherboard
Connection
Note that the exact shape of the production controller box may slightly vary from
the picture above – but the location of the motherboard connection and
connectivity jacks should be the same.

S-C4L Training
7
Slide 7
Who Will Use This Model
Small office users (3-10 people) or individuals (as
a personal business machine).
Mid to large sized offices (10-50 people) as a
work group division printer/scanner.
Mid to large sized offices as a business personal
machine.
This machine has these benefits:
Compact size
Quick warm up time
Standard duplex printing (both scan and print)
Copier/printer
No additional notes.

S-C4L Training
8
Slide 8
Machine Operation
Refer to the operating instructions, general
settings section, and examine what you can do
with this machine.
As this is only a brief introduction, also refer to
the operating instructions in the Machine
Overview and Machine Operation training
module.
No additional notes.

S-C4L Training
9
Slide 9
D109/D110
Service Training
Specifications
Specifications
This module covers general specifications.
In this section you will do these things:
Examine the general specifications for the machine.
Examine the machine configuration.
When you finish this section, you should know the answers to these questions:
What are the main specifications for this machine?
Are the specifications the same for all models?

S-C4L Training
10
Slide 10
General Specifications
Configuration: Desktop
Copy Process: Laser scanning & electrophotographic
printing
Copy speed: 17 ppm (A4 / 8½" x 11"; 100%)
Warm up: (basic) 10 seconds or less
First copy time: 7.5 seconds or less
Copy paper capacity:
Paper tray: 250 sheets
Optional paper tray: 500 sheets x 2
Bypass: 100 sheets
Toner Yield: 7,000 copies per toner bottle
No additional notes.

S-C4L Training
11
Slide 11
More Specifications
For a more detailed description of the machine’s
specifications, refer to the Specifications section
of the Field Service Manual, noting in particular
the following:
Copy paper size
Copy paper weight
Power consumption and machine dimensions
Copy paper capacity
Original paper size
Paper feed
No additional notes.

S-C4L Training
12
Slide 12
Machine Configuration
The standard configuration is shown to the left. The options are
on the right.
There are two machines in this series.
D109 – for Asia: GDI controller without NIC (NIC is an option)
D110 – for Europe: GDI controller with NIC
Standard
250
•Copy
•Duplex
•250-sheet x1 tray
•100-sheet bypass tray
•250-sheet output tray
•GDI printer
•USB 2.0
•Color Scan
Options
500
•ARDF
•500 Sheet
Tray
•Accessibility handle
No additional notes.

S-C4L Training
13
Slide 13
D109/D110
Service Training
Installation
In this section you will do these things:
Install the main machine.
When you finish this section, you should know the answers to these questions:
How do I install this machine?
What do I have to do after I have installed the machine?
Is there any firmware for this machine?

S-C4L Training
14
Slide 14
Before You Start
Read the Installation chapter of the Service
Manual before installing the machine, noting:
Environment (ventilation, temperature range, etc.)
Space and power requirements.
Accessory check (for the model you will install).
Before installing optional units, be sure to:
Switch the machine off and remove the power
cord and network cable.
Keep the system parameter report. You will need
it for any future troubleshooting of the machine.
No additional notes.

S-C4L Training
15
Slide 15
Installation
Install the machine. See "Installation" in the Field
Service Manual.
Install the optional paper tray unit and ARDF.
Be sure to keep in mind the following when you
install the machine and paper tray unit:
You do not need to pull the toner bottle holder all
the way out of the machine.
Do not remove the inner cap of the toner bottle.
Do not use force to turn the toner bottle after you
have set it in the toner bottle holder. The machine
will turn the bottle.
Remove all tape from the machine.
No additional notes.

S-C4L Training
16
Slide 16
Service Program Mode
Standard maintenance work requires utilization
of SP modes. There are two kinds of SP modes
for this machine:
SP Mode (Service Program mode)
SSP Mode (Special Service Program mode)
Read the Service Program section of the Service
Manual. Then try entering some of the SP and
SSP modes detailed in Unit-5 (after you have
finished installed the machine).
Service Program Mode
SP & SSP modes are for the service technician only. Do not let users access SP
& SSP modes.

S-C4L Training
17
Slide 17
D109/D110
Service Training
Machine Overview and Machine Operation
Machine Overview
Introducing the machine.
In this section you will do these things:
Examine mechanical and electrical components.
Examine the paper path and drive layout.
Learn the basic copy process.

S-C4L Training
18
Slide 18
Component Layout
The callout key is in the notes. (Notes view required)
Component names:
20. ID (Image Density) Sensor
21. Registration Roller
22. Registration Sensor
23. Bypass Tray
24. Bypass Paper Feed Roller
25. Bypass Paper End Sensor
26. Bypass Friction Pad
27. Mixing Augers
28. (Main) Friction Pad
29. Paper Feed Roller
30. Paper End Sensor
31. TD (Toner Density) Sensor
32. Bottom Plate
33. Polygon Mirror Motor
34. Laser Unit
35. Toner Supply Bottle (or THM)
36. Toner Collection Coil
37. Scanner HP Sensor
1. Exposure Lamp
2. 1st Scanner
3. CCD (on SBU)
4. Lens Block
5. 2nd Scanner
6. 2nd Mirror
7. 3rd Mirror
8. Platen Cover Sensor
9. Exposure Glass
10. Exit Roller
11. Exit Sensor
12. Scanner Motor
13. Hot Roller
14. Pressure Roller
15. Cleaning Blade
16. OPC Drum
17. Discharge Plate
18. Transfer Roller
19. Development Roller

S-C4L Training
19
Slide 19
Electrical Components – 1
The callout key is in the notes. (Notes view required)
Component names:
10. Exit Sensor
11. ID (Image Density) Sensor
12. Registration Sensor
13. Paper End Sensor
14. Toner Density Sensor
15. Bypass Paper End Sensor
16. Right Door Safety Switch
17. Front Door Safety Switch
18. Quenching Lamp
1. Lens Block
2. Exposure Lamp
3. Lamp Stabilizer Board
4. Scanner HP Sensor
5. Platen Cover Sensor
6. Scanner Motor
7. Mechanical Counter
8. Polygon Mirror Motor
9. LD Unit

S-C4L Training
20
Slide 20
Electrical Components – 2
The callout key is in the notes.
Component names:
1. Duplex Motor
2. Exhaust Fan
3. PSU
4. Controller Board (GDI)
5. BICU
6. Main Motor
7. Paper Feed Clutch
8. Toner Supply Clutch
9. Bypass Feed Clutch
10. Registration Clutch
11. Fusing Solenoid