Ricoh AP600N User manual

Important
❒ If you attach the 1-bin Shift Sort Tray and the Paper Feed Unit, the Paper Feed Unit must be attached prior to attaching the 1-bin Shift Sort Tray.
❒ The 1-bin Shift SortTray and the Mailbox cannot be attached to the printer at the same time.
❒ Check the printer nameplate to confirm the model code.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Caution
• Before installing options, the machine should be turned off and unplugged for at
least thirty minutes.Components inside the machine become very hot, and can
cause a burn injury if touched.
• When lifting the machine, use the grips on both sides.The machine could break
or cause an injury if dropped.
• Itisdangerousto handlethe plugwith wethands.Doingthismayresultinreceiving
an electric shock.
• Before moving the machine, unplug the power cord from the outlet.If the cord is
unplugged abruptly, it could become damaged. Damaged plugs or cords can
cause an electrical or fire hazard.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
1-bin Shift SortTray
Type 2600
(Code: G554)
For Machine Code:G056/G058/G073/G074/G091
INSTALLATION GUIDE
Check the contents of the box for the following items:
Description Q’ty
1-bin Shift Sort Tray 1
Upper Tray 1
Installation Guide (This sheet) 1
Confirm that the followings are true:
• The power switch is turned off.
• The interface cable is unplugged from the printer.
Remove the adhesive tapes and the packing material.
Remove the upper cover of the printer.
Note
❒The upper cover that is removed, is not used when installing
the 1-bin Shift Sort Tray.
ZGDH170J
Holding the 1-bin Shift SortTray on both sides, align the
catches with the holes on the printer and insert.
Caution
• When lifting the 1-bin Shift SortTray, hold it on both sides.Holding
underneaththe1-binShiftSortTraymaycause injurytothehands
if caught between the 1-bin Shift SortTray and the printer.
ZGDX170J
Slide the upper tray into the 1-bin Shift Sort Tray.
ZGDX180J
Attach the interface cable to the printer.
Plug the printer’s power cord back into the wall
outlet and turn on the power switch.
Printed in Japan Copyright © 2000-2003 G554-8600B