ring Panic Button Z-Wave User manual

1
Panic Button Z-Wave
Technical Manual

2
Ring Panic Button
Instructions to locate Z-Wave DSK/QR code
Follow Device inclusion instructions provided in Ring Alarm mobile applications to locate QR code and
enter PIN Code
Factory Reset Instructions
Press and hold the Setup button for 10 seconds. When the LED ring stops blinking, Panic Button
has reset.
A factory reset disconnects the Panic Button from your Ring Alarm. To begin using the Panic
Button again, repeat the setup process in the Ring app.
Use this procedure only in the event that the network primary controller is missing or
otherwise inoperable.”

3
To review your warranty coverage, please visit www.ring.com/warranty.
© 2020 Ring LLC or its affiliates.
Ring, Always Home, and all related logos are trademarks of Ring LLC or its affiliates.
Association CC:
This sensor has one Association groups of 1 node. Group 1 is the lifeline group who will receive
unsolicited messages relating to Panic Button notifications, case tampering notifications, and low-
battery notifications.
Sensor Condition Command Class & Value Configurable?
Communication Test
Notification Report,
Type: System (0x09)
Event: (0x05)
Wake Up Notification
Yes, via Notification Set of Notification
Type 0x09
Sensor Case Removed
Notification Report,
Type: Home Security (0x07)
Event: Tampering Product Covering
Removed (0x03)
Wake Up Notification
Yes, via Notification Set of Notification Type
0x07, and status of
x00: This type of notification turned o
0xFF: This type of notification turned on
Sensor Case Fastened
Notification Report,
Type: Home Security (0x07)
Event: Previous Events Cleared (0x00)
Yes, via Notification Set of Notification Type
0x07, and status of
0x00: This type of notification turned o
0xFF: This type of notification turned on
Battery Level
A level of 0x64 indicates that battery is new.
A level of 0x63 indicates the battery is normal/
OK but not new.
A level of 0x00 indicates that the battery should
be changed “soon.” A battery level of 0xFF indi-
cates that the battery is dead and the sensor is
no longer operational.
No
Panic Command Class Notification
Event Type: Call Police 0x01
Yes, via Notification Set of Notification
Type 0x0A, and status of
0x00: This type of notification turned o
0xFF: This type