RiverRidge 02-186/06-130 User manual

ITEM #: 02-186/06-130 White
ITEM #: 02-187/06-131 Gray
ASSEMBLY INSTRUCTIONS
RiverRidge®5-Tier Corner Ladder Shelf
ADULT ASSEMBLY REQUIRED
WARNING
SEE FULL WARNING ON PAGE 2
This product requires assembly by an adult because of small parts. Care should be taken
in unpacking and assembling this item to keep small parts away from children. During assembly
children should be kept away from the product due to possible risk of injury.
Young children can be seriously injured or killed if furniture tips over.
Don’t use this item for a TV stand or place heavy objects on top of item.
Always use angle-braces or anchors to secure furniture to the wall.

THIS SHELF UNIT WILL HOLD UP TO 10 POUNDS PER SHELF OR A TOTAL OF 50 POUNDS.
DO NOT LOAD EACH SHELF WITH MORE THAN 10 POUNDS OR 50 POUNDS TOTAL WEIGHT.
IF OVERLOADED WITH MORE THAN 10 POUNDS PER SHELF OR 50 POUNDS TOTAL
WEIGHT, SHELF MAY TIP FROM THE WALL AND CAUSE SERIOUS INJURY OR DEATH.
This product is suitable for children 3 years and older.

PARTS LIST
NO QTY DESCRIPTION
1 1PC Left Side Frame
2 1PC Right Side Frame
3 1PC Shelf #1
4 1PC Shelf #1 Left Rail Board
5 1PC Shelf #1 Right Rail Board
6 1PC Shelf #2
7 1PC Shelf #2 Left Rail Board
8 1PC
9 1PC
10 1PC
Shelf #3
Shelf #3 Left Rail Board
Shelf #2 Right Rail Board
11 1PC Shelf #3 Right Rail Board
12 1PC Shelf #4
13 1PC
14 1PC
15 1PC
Shelf #4 Right Rail Board
Shelf #5
16 1PC
17 1PC
Shelf #5 Left Rail Board
Shelf #5 Right Rail Board
Shelf #4 Left Rail Board
2
13
45
6
7
8
9
10 11
12
13 14
15
16 17

TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED)
THE USE OF A POWER SCREWDRIVER IS NOT RECOMMENDED FOR ASSEMBLY
DO NOT USE ITEM IF ANY PARTS ARE MISSING OR DAMAGED
PARTS LIST
NO QTYPARTS DESCRIPTION
A15PCS
B20PCS
C25PCS
Wood Dowel
D
E
F
G
2PCS
2PCS
2PCS Screw (4x12mm)
Plastic Anchor2PCS
HAllen Wrench1PC
Adjustable Anchor Bracket
Screw (3.5x35mm)
Machine Screw (6x25mm)
Screw (4x30mm)
To order replacement parts at no cost to you, email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.

STEP 1
STEP 2
4
4
5
5
3
A
A
A
C
C
CCC
1. Insert 1 wood dowel (A) into wood dowel hole on shelf #1 left rail board (4).
2. Attach shelf #1 left rail board (4) to shelf #1 right rail board (5) by insert wood dowel (A) into
wood dowel hole on shelf #1 right rail board (5).
3. Insert 1 screw (C) through hole on shelf #1 left rail board (4), then tighten to shelf #1 right
rail board (5).
1. Insert 2 Wood dowels (A) into wood dowel holes on shelf #1 left rail board (4) and shelf #1
right rail board (5).
2. Attach shelf #1 (3) to shelf #1 left rail board (4) and shelf #1 right rail board (5) by inserting
wood dowels (A) into wood dowel holes on shelf #1 (3).
3. Insert 4 screws (C) through holes on shelf #1 (3), then tighten to shelf #1 left rail board (4)
and shelf #1 right rail board (5).

STEP 3
STEP 4
A
AA
C
CC
C
C
6
7
7
8
8
1. Insert 1 wood dowel (A) into wood dowel hole on shelf #2 left rail board (7).
2. Attach shelf #2 left rail board (7) to shelf #2 right rail board (8) by inserting wood dowel (A)
into wood dowel hole on shelf #2 right rail board (8).
3. Insert 1 screw (C) through hole on shelf #2 left rail board (7), then tighten to shelf #2 right
rail board (8).
1. Insert 2 wood dowels (A) into wood dowel holes on shelf #2 left rail board (7) and shelf #2
right rail board (8).
2. Attach shelf #2 (6) to shelf #2 left rail board (7) and shelf #2 right rail board (8) by inserting
wood dowels (A) into wood dowel holes on shelf #2 (6).
3. Insert 4 screws (C) through holes on shelf #2 (6), then tighten to shelf #2 left rail board (7)
and shelf #2 right rail board (8).

STEP 5
STEP 6
A
AA
C
C
C
CC
9
10
10
11
11
1. Insert 1 wood dowel (A) into wood dowel hole on shelf #3 left rail board (10).
2. Attach shelf #3 left rail board (10) to shelf #3 right rail board (11) by inserting wood dowel (A)
into wood dowel hole on shelf #3 right rail board (11).
3. Insert 1 screw (C) through hole on shelf #3 left rail board (10), then tighten to shelf #3 right
rail board (11).
1. Insert 2 wood dowels (A) into wood dowel holes on shelf #3 left rail board (10) and shelf #3
right rail board (11).
2. Attach shelf #3 (9) to shelf #3 left rail board (10) and shelf #3 right rail board (11) by inserting
wood dowels (A) into wood dowel holes on shelf #3 (9).
3. Insert 4 screws (C) through holes on shelf #3 (9) then tighten to shelf #3 left rail board (10)
and shelf #3 right rail board (11).

STEP 7
STEP 8
A
AA
C
C
CC
C
12
13
13
14
14
1. Insert 1 wood dowel (A) into wood dowel hole on shelf #4 left rail board (13).
2. Attach shelf #4 left rail board (13) to shelf #4 right rail board (14) by inserting wood dowel (A)
into wood dowel hole on shelf #4 right rail board (14).
3. Insert 1 screw (C) through hole on shelf #4 left rail board (13), then tighten to shelf #4 right
rail board (14).
1. Insert 2 wood dowels (A) into wood dowel holes on shelf #4 left rail board (13) and shelf #4
right rail board (14).
2. Attach shelf #4 (12) to shelf #4 left rail board (13) and shelf #4 right rail board (14) by inserting
wood dowels (A) into wood dowel holes on shelf #4 (12).
3. Insert 4 screws (C) through holes on shelf #4 (12), then tighten to shelf #4 left rail board (13)
and shelf #4 right rail board (14).

STEP 9
STEP 10
A
C
16
17
A
A
C
CC
C
15
16
17
1. Insert 1 wood dowel (A) into wood dowel hole on shelf #5 left rail board (16).
2. Attach shelf #5 left rail board (16) to shelf #5 right rail board (17) by inserting wood dowel (A)
into wood dowel hole on shelf #5 right rail board (17).
3. Insert 1 screw (C) through hole on shelf #5 left rail board (16), then tighten to shelf #5 right
rail board (17).
1. Insert 2 wood dowels (A) into wood dowel holes on shelf #5 left rail board (16) and shelf #5
right rail board (17).
2. Attach shelf #5 (15) to shelf #5 left rail board (16) and shelf #5 right rail board (17) by inserting
wood dowels (A) into wood dowel holes on shelf #5 (15).
3. Insert 4 screws (C) through holes on shelf #5 (15), then tighten to shelf #5 left rail board (16)
and shelf #5 right rail board (17).

STEP 11
STEP 12
STEP 13
6
78
E
E
F
F
3
6
9
12
15
5
2
8
11
14
17
B
B
B
BH
B
B
B
B
B
B
B
B
B
B
H
B
B
B
B
B
B
3
4
6
7
9
10
12
13
15
16
1
1. Attach 2 adjustable anchor brackets (E) to shelf #2 (6) by inserting 2 screws (F) through
holes on adjustable anchor brackets (E), then tighten to shelf #2 (6).
1. Attach 5 assembled shelves to left side frame (1) by inserting 10 machine screws (B) through
holes on left side frame (1), then tighten to 5 assembled shelves by using Allen wrench (H).
1. Attach 5 assembled shelves to right side frame (2) by inserting 10 machine screws (B)
through holes on right side frame (2), then tighten to 5 assembled shelves by using Allen
wrench (H).
STEP 11
STEP 12
STEP 13
6
78
E
E
F
F
1. Attach 2 adjustable anchor brackets (E) to shelf #2 (6) by inserting 2 screws (F) through
holes on adjustable anchor brackets (E), then tighten to shelf #2 (6).
1. Attach 5 assembled shelves to left side frame (1) by inserting 10 machine screws (B)
through holes on left side frame (1), then tighten to 5 assembled shelves by using
Allen Wrench (H).
1. Attach 5 assembled shelves to right side frame (2) by inserting 10 machine screws (B)
through holes on right side frame (2), then tighten to 5 assembled shelves by using
Allen Wrench (H).
STEP 11
STEP 12
STEP 13
6
78
E
E
F
F
3
6
9
12
15
5
2
8
11
14
17
B
B
B
BH
B
B
B
B
B
B
B
B
B
B
H
B
B
B
B
B
B
3
4
6
7
9
10
12
13
15
16
1
1. Attach 2 adjustable anchor brackets (E) to shelf #2 (6) by inserting 2 screws (F) through
holes on adjustable anchor brackets (E), then tighten to shelf #2 (6).
1. Attach 5 assembled shelves to left side frame (1) by inserting 10 machine screws (B) through
holes on left side frame (1), then tighten to 5 assembled shelves by using Allen wrench (H).
1. Attach 5 assembled shelves to right side frame (2) by inserting 10 machine screws (B)
through holes on right side frame (2), then tighten to 5 assembled shelves by using Allen
wrench (H).

ATTENTION ADULTS: Cabinet should be checked periodically for damage or
loose screws/parts. Take appropriate action necessary to correct hazards such as
tightening of screws and taking any damaged parts away from children.
WARNING Please make sure youritem is
secured to the wall, per assembly instructions.
CARE INSTRUCTIONS:
Wipe clean with a water dampened cloth. Wipe dry with clean cloth.
DRYWALL
WALL ANCHOR
WITH SCREW
SCREW
ONLY
DRYWALL
OPTION #2
OPTION #1
WOOD
STUD
STEP 14
D
DD
G
GE
D
D
G
G
6
*Tip: Anchor brackets (E) can be adjusted to correct distance from wall to cabinet as needed. Once
adjusted, be sure to re-tighten bracket inside cabinet for stability.
Option #1: Securing to Drywall
1. Position shelf against wall in desired location. Using a pencil, make small marks on wall through holes
on brackets (E). Move shelf away from wall and screw 2 plastic anchors (G) into wall on pencil marks.
2. Place shelf against wall, insert 2 screws (D) through holes on brackets (E), then tighten to plastic
anchors (G).
Option #2: Securing to Drywall and Wood Stud
1. Position shelf against wall in desired location. Insert 2 screws (D) through holes on brackets (E), then
tighten through drywall and into wood stud.
IMPORTANT:
Keep assembly instructions for future reference.

Enjoy your new RiverRidge®Shelf!
To order replacement parts at no cost to you,email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.
RiverRidge® is a registered trademark of Sourcing Solutions, Inc., Hudson, WI 54016
Thank you for purchasing this RiverRidge®Home item. We hope you
enjoy it and consider purchasing other RiverRidge®items.