RiverRidge Ashland 06-143 User manual

ASSEMBLY INSTRUCTIONS
ADULT ASSEMBLY REQUIRED
WARNING
SEE FULL WARNING ON PAGE 2
This product requires assembly by an adult because of small parts. Care should be taken
in unpacking and assembling this item to keep small parts away from children. During assembly
children should be kept away from the product due to possible risk of injury.
Young children can be seriously injured or killed if furniture tips over.
Don’t use this item for a TV stand or place heavy objects on top of item.
Always use angle-braces or anchors to secure furniture to the wall.
ITEM #: 06-143 White
RiverRidge®Ashland Slim Single Door Cabinet

THIS CABINET WILL HOLD UP TO 12 POUNDS PER SHELF OR A TOTAL OF 48
POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 12 POUNDS. LOADING
WITH MORE THAN 12 POUNDS PER SHELF MAY CAUSE DAMAGE TO THE CABINET
OR CAUSE SERIOUS INJURY OR DEATH.

1
2
3
4
4
5
6
7
8
PARTS LIST
Top Board1PC
QTYNO DESCRIPTION
1
Left Side Panel1PC2
Right Side Panel1PC3
Adjustable Shelf2PCS4
Bottom Board1PC5
Lower Cross Bar1PC6
Back Board1PC7
Door1PC8

Magnet with 2 Screws
Adjustable Anchor Bracket
Plastic Anchor
Cam Bolt
Cam Lock
Wood Dowel
Hinge
Machine Screw (4x18mm)
Knob
Screw (3x12mm)
Screw (4x30mm)
Screw(4x10mm)
Magnet Plate
Shelf Holder
Screw (2.5x10mm)
PARTS LIST
1 SET
12PCS
8PCS
8PCS
1PC
1PC
2PCS
A
B
C
D
E
F
G
1PC
1PC
H
I
1PC
8PCS
J
K
TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED)
THE USE OF A POWER SCREWDRIVER IS NOT RECOMMENDED FOR ASSEMBLY
DO NOT USE ITEM IF ANY PARTS ARE MISSING OR DAMAGED
NO PARTS QTY DESCRIPTION
9PCS
L
12PCS
M
1PC
N
1PC
O
To order replacement parts at no cost to you, email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.

STEP 1
STEP 2
A
A
A
A
2
3
BB
BB
C
C
C
C
2
3
5
6
1. Screw 2 cam bolts (A) into cam bolt holes on left side panel (2).
2. Screw 2 cam bolts (A) into cam bolt holes on right side panel (3).
1. Insert 4 wood dowels (C) into wood dowel holes on left side panel (2).
2. Attach bottom board (5) and lower cross bar (6) to left side panel (2) by inserting cam
bolts (A) into cam lock holes and wood dowels (C) into wood dowel holes on bottom board (5)
and lower cross bar (6).
3. Insert 2 cam locks (B) into cam lock holes on bottom board (5), then rotate clockwise to secure
cam bolts (A) in place.
4. Insert 4 wood dowels (C) into wood dowel holes on right side panel (3).
5. Attach right side panel (3) to bottom board (5) and lower cross bar (6) by inserting cam
bolts (A) into cam lock holes and inserting wood dowels (C) into wood dowel holes on bottom
board (5) and lower cross bar (6).
6. Insert 2 cam locks (B) into cam lock holes on bottom board (5), then rotate clockwise to
secure cam bolts (A) in place.

B
B
C
C
C
2
1
3
STEP 3
STEP 4
A
A
A
A
N
N
HH
D
D
1
1. Screw 4 cam bolts (A) into cam bolt holes on top board (1).
2. Attach adjustable anchor bracket (N) to top board (1) by inserting 1 screw (H) through hole
on adjustable anchor bracket (N), then tighten to top board (1).
3. Attach magnet (D) to top board (1) by inserting 2 screws through holes on magnet (D), then
tighten to top board (1).
1. Insert 4 wood dowels (C) into wood dowel holes on top board (1).
2. Attach top board (1) to left side panel (2) and right side panel (3) by inserting wood dowel (C)
into wood dowel holes and cam bolts (A) into cam lock holes on left side panel (2) and right
side panel (3).
3. Insert 4 cam locks (B) into cam lock holes on left side panel (2) and right side panel (3), then
rotate clockwise to secure cam bolts (A) in place.

STEP 5
STEP 6
M
M
M
M
M
M
M
M
1
1
3
7
2
JJ
J
J
J
J
J
4
4
1. Attach back board (7) to back of cabinet by inserting 12 screws (M) through holes on back
board (7), then tighten to back of cabinet.
1. Insert 8 shelf holders (J) into holes on left side panel (2) and right side panel (3), making
sure all 4 shelf holders are at same level.
2. Place adjustable shelves (4) onto shelf holders (J).

STEP 7
STEP 8
E
E
EF
F
G
G
I
I
LL
L
LLLL
L
8
1. Attach 2 hinges (E) to door (8) by inserting 4 screws (L) through holes on hinges (E), then
tighten to door (8).
2. Attach magnet plate (I) to door (8) by inserting 1 screw (L) through hole on magnet plate (I),
then tighten to door (8).
3. Attach knob (G) to door (8) by inserting 1 machine screw (F) through hole on door (8), then
tighten to knob (G).
1. Attach door (8) to right side panel (3) by inserting 4 screws (L) through holes on hinges (E),
then tighten to right side panel (3).
L
L
L
L
L
L
1
3
2
8

STEP 9
DRYWALL
WALL ANCHOR
WITH SCREW
SCREW
ONLY
DRYWALL
OPTION #2OPTION #1
WOOD
STUD
NK
K
KK
O
O
Option #1: Securing to Drywall
1. Position cabinet against wall in desired location. Using a pencil, make 1 small mark on wall through
hole on bracket (N). Move cabinet away from wall and screw 1 plastic anchor (O) into wall on
pencil mark.
2. Place cabinet against wall, insert 1 screw (K) through hole on bracket (N), then tighten to plastic
anchor (O).
Option #2: Securing to Drywall and Wood Stud
1. Position cabinet against wall in desired location. Insert 1 screw (K) through hole on bracket (N),
then tighten through drywall and into wood stud.
*Tip: Anchor bracket (N) can be adjusted to correct distance from wall to cabinet as needed. Once
adjusted, be sure to re-tighten bracket inside cabinet for stability.
IMPORTANT:
Keep assembly instructions for future reference.
ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose
screws/parts. Take appropriate action necessary to correct hazards such as tightening
of screws and taking any damaged parts away from children.
CARE INSTRUCTIONS:
Wipe clean with a water dampened cloth. Wipe dry with clean cloth.
WARNING Please make sure your item is
secured to the wall, per assembly instructions.

Enjoy your new RiverRidge® Cabinet!
To order replacement parts at no cost to you,email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.
RiverRidge® is a registered trademark of Sourcing Solutions, Inc., Hudson, WI 54016
Thank you for purchasing this RiverRidge®Home item. We hope you
enjoy it and consider purchasing other RiverRidge®items.