RiverRidge 06-138 User manual

ASSEMBLY INSTRUCTIONS
ITEM #: 06-138 White
RiverRidge®Somerset Corner Wall Cabinet
ADULT ASSEMBLY REQUIRED
WARNING SEE FULL WARNING ON PAGE 2
This product requires assembly by an adult because of small parts. Care should be taken
in unpacking and assembling this item to keep small parts away from children. During assembly
children should be kept away from the product due to possible risk of injury.
Young children can be seriously injured or killed if furniture tips over.
Don’t use this item for a TV stand or place heavy objects on top of item.
Always use angle-braces or anchors to secure furniture to the wall.

THIS SHELF UNIT WILL HOLD UP TO 20 POUNDS PER SHELF OR A TOTAL OF 40
POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 20 POUNDS OR 40 POUNDS
TOTAL WEIGHT. IF OVERLOADED WITH MORE THAN 20 POUNDS PER SHELF OR 40
POUNDS TOTAL WEIGHT, SHELF MAY TIP FROM THE WALL AND CAUSE SERIOUS
INJURY OR DEATH.

PARTS LIST
2
1
3
4
56
78
NO QTY DESCRIPTION
1 1PC Top Board
2 1PC Left Side Panel
3 1PC Right Side Panel
4 1PC Bottom Board
5 1PC Left Side Board
6 1PC Right Side Board
7 1PC Adjustable Shelf
8 1PC Door

PARTS LIST
NO QTYPARTS DESCRIPTION
A10PCS
B10PCS
C14PCS
Cam Bolt
D
E
F
G
H
I
J
K
L
M
2PCS
9PCS
2PCS Machine Screw (4x18mm)
Handle
Shelf Holder
Plastic Anchor
Magnet with 2 Screws
Magnet Plate
Screw (4x30mm)
Screw (4x45mm)
1PC
6PCS
2PCS
1 SET
1PC
9PCS
2PCS
Screw (3x12mm)
Wood Dowel
Cam Lock
Hinge
TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED)
THE USE OF A POWER SCREWDRIVER IS NOT RECOMMENDED FOR ASSEMBLY
DO NOT USE ITEM IF ANY PARTS ARE MISSING OR DAMAGED
To order replacement parts at no cost to you,email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.

STEP 1
STEP 2
AA
A
A
23
C
C
L
L
L
6
5
1. Screw 2 cam bolts (A) into pre-threaded holes on left side panel (2).
2. Screw 2 cam bolts (A) into pre-threaded holes on right side panel (3).
1. Insert 2 wood dowels (C) into wood dowel holes on right side board (6).
2. Attach left side board (5) to right side board (6) by inserting wood dowels (C) into wood dowel
holes on left side board (5), then insert 3 screws (L) through holes on left side board (5) and
tighten to right side board (6).

STEP 3
STEP 4
C
C
B
B5
6
2
C
C
5
6
2
3
B
B
1. Insert 2 wood dowels (C) into wood dowel holes on left side panel (2).
2. Attach left side panel (2) to left side board (5) by inserting wood dowels (C) into wood dowel
holes and inserting cam bolts (A) into cam lock holes on left side board (5).
3. Insert 2 cam locks (B) into cam lock holes on left side board (5), then rotate clockwise to
secure cam bolts in place.
1. Insert 2 wood dowels (C) into wood dowel holes on right side panel (3).
2. Attach right side panel (3) to right side board (6) by inserting wood dowels (C) into wood
dowel holes and inserting cam bolts (A) into cam lock holes on right side board (6).
3. Insert 2 cam locks (B) into cam lock holes on right side board (6), then rotate clockwise to
secure cam bolts in place.

STEP 5
STEP 6
C
C
C
L
L
L
L
L
L
C4
5
6
2
3
1
AA
AA
A
A
J
J
1. Insert 4 wood dowels (C) into wood dowel holes on left side board (5) and right side board (6).
2. Attach bottom board (4) to left side board (5), right side board (6), left side panel (2) and right
side panel (3) by inserting wood dowels into wood dowel holes on bottom board (4).
3. Insert 6 screws (L) through holes on bottom board (4), then tighten to left side board (5), right
side board (6), left side panel (2) and right side panel (3).
1. Screw 6 cam bolts (A) into pre-threaded holes on top board (1).
2. Attach magnet with 2 screws (J) to top board (1) by inserting 2 screws through holes on
magnet (J), then tighten to top board (1).

STEP 7
STEP 8
8
E
D
K
G
F
E
EE
EE
E
F
F
G
K
D
D
C
C C
C
B
B
B
B
BB
1
56
1. Insert 4 wood dowels (C) into wood dowel holes on top board (1).
2. Attach top board (1) to left side board (5), right side board (6), left side panel (2) and right side
panel (3) by inserting wood dowels (C) into wood dowel holes and inserting cam bolts (A) into
cam lock holes on left side board (5), right side board (6), left side panel (2) and right side
panel (3).
3. Insert 2 cam locks (B) into cam lock holes on left side board (5), 2 cam locks (B) into cam
lock holes on right side board (6), 1 cam lock (B) into cam lock hole on left side panel (2) and
1 cam lock (B) into cam lock hole on right side panel (3), then rotate clockwise to secure
cam bolts in place.
1. Attach 2 hinges (D) to door (8) by inserting 4 screws (E) through holes on 2 hinges (D), then
tighten to door (8).
2. Attach magnet plate (K) to door (8) by inserting 1 screw (E) through hole on magnet plate (K),
then tighten to door (8).
3. Attach handle (G) to door (8) by inserting 2 machine screws (F) through holes on door (8),
then tighten to handle (G).

STEP 9
STEP 10
1
8
2
4
7
1
8
E
ED
D
E
E
2
4
H
H
H H H
H
H
1. Attach door (8) to right side panel (3) by inserting 4 screws (E) through the holes on
hinges (D), then tighten to right side panel (3).
1. Insert 6 shelf holders (H) into holes on left side board (5), right side board (6), left side
panel (2) and right side panel (3). Make sure 6 shelf holders (H) are at same level.
2. Place adjustable shelf (7) onto shelf holders (H).

STEP 11
DRYWALL
WALL ANCHOR
WITH SCREW
SCREW
ONLY
DRYWALL
OPTION #2
OPTION #1
WOOD
STUD
II
I
I
MM
M
MM
Option #1: Securing to Drywall
1. Position cabinet against wall in desired location. Using a pencil make 2 small marks on wall
through holes on left side board (5) and right side board (6). Move cabinet away from wall and
screw 2 plastic anchors (I) into wall on pencil marks.
2. Place cabinet against wall, insert 2 screws (M) through holes on left side board (5) and right
side board (6), then tighten to plastic anchors (I).
Option #2: Securing to Drywall and Wood Stud
1. Position cabinet against wall in desired location. Insert 2 screws (M) through holes on left side
board (5) and right side board (6), then tighten through drywall and into wood stud.
ATTENTION ADULTS: Cabinet should be checked periodically for damage or
loose screws/parts. Take appropriate action necessary to correct hazards such as
tightening of screws and taking any damaged parts away from children.
WARNING Please make sure youritem is
secured to the wall, per assembly instructions.
CARE INSTRUCTIONS:
Wipe clean with a water dampened cloth. Wipe dry with clean cloth.
IMPORTANT:
Keep assembly instructions for future reference.

Thank you for purchasing this RiverRidge® Home item. We hope you
enjoy it and consider purchasing other RiverRidge® items.
Enjoy your new RiverRidge®Cabinet!
To order replacement parts at no cost to you,email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.
RiverRidge® is a registered trademark of Sourcing Solutions, Inc., Hudson, WI 54016