Rollei LUMIS Magnetic Smartphone Ring Light... User manual

LUMIS Magnetic Smartphone
Ring Light Bi-Color
www.rollei.de
ANLEITUNG AUF DEUTSCH
MANUAL IN ENGLISH

20
ENGLISH
Before the First Use
Please read the operating instructions and the
safety instructions carefully before using the device
for the first time.
Keep the operating instructions together with the
device for future use. If you pass on the device to
a third party, this manual is part of the device and
must be supplied with the device.
Intended Use
This unit is designed for use as photo and video
lighting only. It must not be used for other purposes
and in particular not for domestic room lighting.

21
Explanation of Symbols
The following symbols are used in this manual, on
the LED light or on the packaging.
Products marked with this symbol
comply with all relevant community
regulations of the European Economic
Area.
Products marked with this symbol are
operated with direct current.

22
ENGLISH
Safety Instructions
– Only connect the product if the mains voltage of
the socket or the USB input corresponds to the
information on the type plate on the back of the
product.
– Do not use the product if it is visibly damaged or
if the cable is defective.
– Use only the USB-C cable supplied.
– If the product or accessories are damaged, they
must be replaced or repaired by the manufacturer,
its customer service or a similarly qualified person
in order to avoid hazards.
– The housing must not be opened and repairs may
only be carried out by a specialist. To do this, con-
tact a specialist workshop. In the event of repairs
by the user, improper connection or incorrect
operation, all liability and warranty claims are
excluded.
– Do not insert any objects into the product.
– Do not leave the product unattended during
operation.
– Protect the product from moisture. Do not touch
it with wet / damp hands or submerge it in water.
– This product is not waterproof! Do not use this
product in the rain or in wet areas.

23
Safety Instructions
– Do not open, damage, short circuit, bypass, or use
the battery for any other purpose.
– Keep the battery away from children and animals,
open flames and liquids and do not expose it
to temperatures higher than 50 °C. In addition,
observe the information on caring for the battery
in these operating instructions.
– Do not use or store the device at high tempera-
tures or in closed rooms with direct sunlight and
do not charge the battery during this time.The
product should no longer be used at ambient
temperatures of more than 50 °C.
– Do not use the device in the vicinity of flammable
gases or liquids, as this can lead to explosions.
– Do not point the product at drivers of cars, buses,
bicycles, motorcyclists, or train drivers while
driving. The driver can be blinded and cause an
accident. This also applies to persons or groups
not listed if an accident could be caused by
possible glare.
– Do not point the product directly into the eyes of
people or animals, as this can damage the retina,
impair vision and even lead to blindness.
– The device is not a toy. Keep the device, accesso-
ries and packaging materials away from children
and animals to prevent accidents and suffocation.

24 Safety Instructions
– Provide adequate ventilation during operation.
Never cover the device.
– If you sell the product to someone else, give up also
pass these operating instructions on to this person.
Note: For lighting for photographic purposes only.
Not suitable for permanent room lighting.
Battery Warnings
– Do not disassemble, hit or puncture the battery,
be careful not to short-circuit the battery. Do
not expose the battery to places with high
temperatures. Do not continue to use the battery
if it leaks or expands.
– Always charge through the system. If the battery
is replaced with the wrong type, there is a risk of
explosion.
– Keep the battery away from children and animals.
– Batteries can explode if exposed to an open fire.
Never throw batteries into a fire.
– Dispose of used batteries according to local
regulations.
– Before disposing of the appliance, remove the
battery and dispose of it separately.
ENGLISH

25
Precautions
– Fully charge the battery, then disconnect the USB
cable.
– If the product has not been used for a long period
of time, charge the battery before using it again.
– To extend the battery life, you should charge the
battery at least every three months.
– This product has a built-in, rechargeable battery
that has a specific run time. If this has been used
for a certain period of time, the performance of
the battery will be reduced. This is normal.
– If the device is used in too cold or too hot
ambient temperatures, the device switches off
automatically.
– Please have the product checked by an autho-
rized service center if a problem occurs.You
are not permitted to dismantle the product if it
malfunctions. Otherwise your guarantee will be
void.

26 Package Contents
– LUMIS Magnetic Smartphone Ring Light Bi-Color
– Suction cup clamp
– Metal ring
– USB-C cable
– User manual
ENGLISH

27
1 2 3 4
5
Product Overview
Color temperature minus button
Color temperature plus button
On/off/brightness button
USB-C connection
Magnetic backside
Battery charging LED
LEDs
Clamp brackets
Suction cups
Adhesive surface
1
2
3
4
5
8
6
9
7
10
6
8 7
910

28 Operation
Charging
– Connect the LUMIS Magnetic Smartphone Ring
Light Bi-Color to the USB-C cable and this to a
suitable power adapter and power source.
– While the battery is charging, the battery char-
ging LED [6] lights up red. When the battery is
fully charged, the battery charging LED [6] lights
up green.
Notes:
– No quickchargers and/or superchargers may be
used to charge the Rollei LUMIS Magnetic Smart-
phone Ring Light Bi-Color, only power adapters
with a maximum of DC 5.0 V / 1.0 A.
– Please use only the USB-C cable included in the
package to charge the device. Otherwise, there is
a danger of fire or electric shock.
Mounting via Magnetic Backside for Smart-
phones With Integrated Magnets
– Bring the magnetic backside
[5] of the LUMIS Magnetic
Smartphone Ring Light Bi-Color
together with the magnetic
backside of your smartphone
until they stick together.
ENGLISH

29
Operation
Mounting via Metal Ring for Smartphones
Without Integrated Magnets
– Clean the surface of the back of
your smartphone.
– Remove the protective film on
the adhesive surface [10] of the
metal ring.
– Place the adhesive surface [10]
of the metal ring at the desired
position on the back of your
smartphone.
– Bring the magnetic backside
[5] of the LUMIS Magnetic
Smartphone Ring Light Bi-Color
together with the metal ring
until they stick together.

30 Operation
Mounting via Suction
Cup Clamp
– Clean the surface of the backside
of the LUMIS Magnetic Smart-
phone Ring Light Bi-Color.
– Press the suction cups [9] of the
suction cup clamp to the back of
the LUMIS Magnetic Smartphone
Ring Light Bi-Color until they
adhere.
– Press the clamp brackets [8] of
the suction cup clamp apart and
attach them to your smartphone.
ENGLISH

31
Operation
Switch On / Switch Off
– Press the on/off/brightness button [3] for a few
seconds to switch the LUMIS Magnetic Smart-
phone Ring Light Bi-Color on or off.
Set Brightness
– Press the on/off/brightness button [3] briefly to
set the desired brightness in 3 different bright-
ness levels.
Set Color Temperature
– Press the color temperature plus and color
temperature minus buttons [2/1] briefly to set the
desired color temperature from 2,500 – 8,500 K
in 7 different color temperature levels.
– Press and hold the color temperature plus and
color temperature minus buttons [2/1] to set the
color temperature steplessly from 2,500 – 8,500 K.

32 Technical Data
Number of LEDs 46 (23 cool white,
23 warm white)
Power 2.0 W
Color temperature 2,500 – 8,500 K
Color Rendering
Index (CRI)
98+
Television Lighting
Consistency Index
(TLCI)
99+
Power/brightness 3 levels
Illuminance 266 lux (0.5 m, 5,500 K)
Illumination angle 120°
Power supply Lithium-ion battery (3.7 V /
300 mAh / 1.11 Wh)
Input DC 5.0 V / 1.0 A
Charging time Approx. 110 min.
Connections USB-C connection,
magnetic backside,
suction cup clamp
Operating temp. -10 – 50 °C
Dimensions | Weight 5.7 x 5.7 x 0.8 cm | 33 g
What‘s in the box LUMIS Magnetic Smart-
phone Ring Light Bi-Color,
suction cup clamp, metal
ring, USB-C cable, manual
Technical data are subject to change without notice.
ENGLISH

33
*marked with: Cd = Cadmium, Hg = Mercury, Pb = Lead.
Disposal
Dispose of the packaging according
to its type. Use the local possibilities for
collecting paper, cardboard and other materials (ap-
plicable in the European Union and other European
countries with systems for the separate collection of
recyclable materials).
Devices that are marked with this
symbol must not be disposed of with
household waste! You are legally obliged
to dispose of old devices separately from to dispose
of household waste. Information on collection points
that accept old appliances free of charge can be
obtained from your local authority or town council.
Batteries and rechargeable accumula-
tors must not be disposed of in house-
hold waste! As a consumer you are legally
obliged to dispose of all batteries and accumulators,
whether they contain harmful substances* or not,
to be disposed of in an environmentally sound
manner. Accumulators and batteries are therefore
marked with the symbol shown opposite. For more
information, contact your dealer or contact return
and collection points in your community.

34
ENGLISH
Conformity
Hereby, Rollei GmbH & Co. KG declares that this de-
vice ”Rollei LUMIS Magnetic Smartphone Ring Light
Bi-Color“ complies with the following directives:
2011/65/EU RoHs Directive
2014/30/EU EMC Directive
The full text of the EU Declaration of Conformity is
available at the following Internet address:
http://www.rollei.com/egk/
lumismagneticsmartphoneringlightbicolor
Rollei GmbH & Co. KG
In de Tarpen 42, 22848 Norderstedt
Germany

35