Ronbow 600118-FINISH Assembly instructions

INSTALLATION AND CARE GUIDE
WOOD FRAME MIRROR
600118-FINISH
600124-FINISH
607224-FINISH
603324-FINISH
603124-FINISH
603130-FINISH
603160-FINISH
600023-FINISH
602322-FINISH
606124-FINISH
606127-FINISH
606160-FINISH

171218ronbow.comINSTALLATION SHEET
2
WOOD FRAME MIRROR
Model : 600118-FINISH
600124-FINISH
607224-FINISH
603324-FINISH
603124-FINISH
603130-FINISH
603160-FINISH
600023-FINISH
602322-FINISH
606124-FINISH
606127-FINISH
606160-FINISH
Tools Required
MATERIALS INCLUDED
2 Anchors
2 wood screws
MATERIALS NEEDED
1 2 x 4 cut to size (For Larger Sizes)
Step 1:
Figure 1.
Determine the ideal location of your new
mirror.
PRE-INSTALLATION
minimum to ceiling
minimum to faucet
1”
1”
See Figure 2.
(For Larger Sizes)
Place a 2 x 4 supporting beam behind the wall of
the desired location for larger size mirrors.
Step 2:
Figure 2.
See Figure 1.

171218ronbow.comINSTALLATION SHEET
3
WOOD FRAME MIRROR
Model : 600118-FINISH
600124-FINISH
607224-FINISH
603324-FINISH
603124-FINISH
603130-FINISH
603160-FINISH
600023-FINISH
602322-FINISH
606124-FINISH
606127-FINISH
606160-FINISH
INSTALLING THE MIRROR
Step 3:
See Figure 3.
Mark the distance of the two holes at
desired location on the wall.
Pilot Holes
Figure 3.
Pilot Holes
Step 4:
See Figure 4.
Screw in the screws at the marked location.
Make sure
Allow about 1/8” clearance from screw head to
wall.
Note: fasten the screws provided into the anchor.
Secure the anchors in the wall
Figure 4.
Step 5:
See Figure 5.
Line up the keyhole hardware on the back of the
mirror to the screws on the wall, and allow the
mirror to sit in place.
Wall
Anchor
Mirror
Screw
Figure 5.