Ronbow CELESTE 524011-FINISH Assembly instructions

INSTALLATION AND CARE GUIDE
CELESTE WALL BOX
524011-FINISH

170714ronbow.comINSTALLATION SHEET
2
CELESTE WALL BOX
Model : 524011-FINISH
Tools Required
MATERIALS INCLUDED
1 wood box
1 velcro piece
2 hanging hardware
2 wood screws
MATERIALS NEEDED
1 2 X 4 supprt beam

170714ronbow.comINSTALLATION SHEET
3
CELESTE WALL BOX
Model : 524011-FINISH
Step 1:
Figure 1.
Cut the 2 x 4 support beam to size and place
behind the wall for extra support of your new wall
box
PRE-INSTALLATION
See Figure 2.
Mark the location of the mounting hardware with
a distance between 9 to 9 1/2”.
Then screw on the mounting hardware gently to
allow the mounting hardware to rotate. Do not
overtighten.
Place the leveler on top of the mounting
hardware and rotate until it reaches a leveled
position.
Then tighten the mounting hardware.
Step 2:
Figure 2.
Gently hang the wall box to the wall to complete
the installation.
Step 3:
See Figure 1.
Tighten lightly to allow
360° adjustment
INSTALLING THE WALL BOX