Ronbow 059324 Assembly instructions

INSTALLATION AND CARE GUIDE
SOLUTIONS VANITY
059324
059330
059336
059348

170630ronbow.comINSTALLATION SHEET
1
SOLUTIONS Vanity
Model : 059324
059330
059336
059348
Tools Required
PRE-INSTALLATION
Materials Included
Cone Leg Option
4 cone legs
4 leg levelers
1 supporting leg (included in
the 48” Vanity)
Cube Leg Option
4 cube legs
8 wooden dowels
4 long screws
4 leg levelers
1 supporting leg (included in
the 48” Vanity)
Toe Kick Option
1 toe kick
4 wooden dowels
4 long screws
4 leg levelers
Materials Required
3 wood screws
1 2x4 beam cut to size
1 Vanity with leg option
Leg Options

170630ronbow.comINSTALLATION SHEET
2
SOLUTIONS Vanity
Model : 059324
059330
059336
059348
Figure 2.
Step 3: Carefully lay the vanity down and
simply screw the cone leg into the hole
located on bottom of the vanity.
For 48” Vanity, be sure to install the
supporting leg that is included in the
vanity package.
Verify the vanity is level.
Adjust the leg levelers if needed.
Determine the ideal location of your
new vanity.
Note: Check if the location has at least
two studs. Front notch the studs and
install a 2x4 horizontal beam. This will
add stability for the vanity.
Step 1:
PRE-INSTALLATION
Leveler
INSTALLING THE CONE LEG
Supporting leg
(48” Vanity only)
See Figure 1.
Figure 1.
See Figure 2.

170630ronbow.comINSTALLATION SHEET
3
SOLUTIONS Vanity
Model : 059324
059330
059336
059348
Step 1: Carefully lay the vanity down
Install the wooden dowel at the left
and right holes
Carefully align and join the cube leg to
the vanity.
Then screw in the long screw to secure
the cube leg to the vanity.
For 48” Vanity, be sure to install the
supporting leg that is included in the
vanity package.
Verify the vanity is level.
Adjust the leg levelers if needed.
See Figure 3.
INSTALLING THE CUBE LEG
Figure 3.
Supporting leg
(48” Vanity only)

170630ronbow.comINSTALLATION SHEET
4
SOLUTIONS Vanity
Model : 059324
059330
059336
059348
Step 1: Carefully lay the vanity down
Install the wooden dowel at the holes
closer to the edge.
Carefully align and join the toe kick to
the vanity.
Then screw in the long screw to secure
the toe kick to the vanity.
Verify the vanity is level.
Adjust the leg levelers if needed.
NOTE: Team Work Required
See Figure 4.
INSTALLING THE TOE KICK
Figure 4.

170630ronbow.comINSTALLATION SHEET
5
SOLUTIONS Vanity
Model : 059324
059330
059336
059348
Step 2: Attach the vanity to the wall with
wood screws into the horizontal beam.
INSTALL THE VANITY
See Figure 5.
Step 2:
Step 4:
Step 3:
Install the sink to the vanity top per
the manufacturer’s instructions.
Follow the directions on the silicone
tube to allow for ample drying time.
Refrain from moving/using the
vanity during this time.
Apply a thin bead of silicone to the
surface of the vanity.
Carefully place the vanity top on
the vanity.
Clean o any excess
silicone immediately.
Clean the surface of the cabinet with a
damp cloth.
Step 1:
INSTALL THE VANITY TOP
See Figure 6.
Figure 6.
Figure 5.

170630ronbow.comINSTALLATION SHEET
6
SOLUTIONS Vanity
Model : 059324
059330
059336
059348
Figure 7.
Locate the screw nearest the hinge
cup and rotate clockwise or counter-
clockwise to move the door from side
to side.
Locate the screw furthest away from
the hinge cup and turn the screw
clockwise or counter-clockwise to
move the door from front to back.
Locate the screw pictured in Figure 6.
Turn the screw clockwise or counter-
clockwise to move the door from top
to bottom.
ADJUST DOOR HINGE
Figure 8.
Figure 9.
NOTE: When adjusting the door hinges keep in mind
to adjust the other hinges.
Side to Side
Front to Back
Top to Bottom
See Figure 7.
See Figure 8.
See Figure 9.
Side
Depth
Height

170630ronbow.comINSTALLATION SHEET
7
SOLUTIONS Vanity
Model : 059324
059330
059336
059348
Figure 10.
Step 2: Slide and lift up the drawer box.
Pull the release latches located
underneath the drawer.
Slide drawer box in until secured by rail
hook.
See Figure 11.
See Figure 10.
See Figure 12.
Step 1:
Step 1:
REMOVE DRAWER
REINSTALL DRAWER
Figure 11.
Figure 12.
Hook
https://youtu.be/4DdK3cj3sTU

170630ronbow.comINSTALLATION SHEET
8
SOLUTIONS Vanity
Model : 059324
059330
059336
059348
Wood Surfaces
Recommended Products
The fine furniture finish of your new vanity, mirror or other bathroom accessories are designed to
protect against normal home use. With proper care, your product will provide years of use and beauty
in your home.
General Care Tips
PRODUCT CARE AND MAINTENANCE
• If a spill occurs, clean and dry the surface immediately as liquid can soak through the surface and cause
greater damage.
• Do not place in direct sunlight. Exposure to sunlight may affect the appearance of your vanity, and the
finish will eventually crack.
• Keep away from direct sources of extreme temperatures as heat, cold or moisture from humidity.
Color changes, or blemishes in the wood can occur if recommended care of is not met. Try to avoid
these extremes.
• Most wood surfaces can be cleaned, or dusted, with any commercial wood cleaning product. For general
cleaning, use a non-abrasive, or lint-free cloth while dusting along the wood grain to preserve the
wood’s chacteristics.
• Pledge Orange Oil, or similar
• Orange-Glo Wood Cleaner
DISCLAIMERS: Wood naturally ages, darkens and changes color over time due to several environmental conditions that may cause materials to vary from their
original color and/or to warp, split or crack. These variations are considered to be the nature of the material in relation to their environmental exposure and may
be significant over a long period of time. The eectiveness of cleaning Ronbow product is dependant on various factors that include sunlight, smoke, moisture,
household cleaners and/or amount of cleaning product used over time. Ronbow cannot guarantee that the above Product Care & Maintenance methods will
eectively clean your product.
• Test cleaning product on small, discrete area prior to applying to entire surface.
• Wipe surfaces frequently with dry, soft, non-abrasive and lint-free towel.
• Do not allow liquids and moisture to accumulate on the surface of products.
• For warranty information, please visit our website at www.ronbow.com or contact the Customer Service
Department at [phone].

170630
40650 Encyclopedia Circle
Fremont, CA 94538
T 510.713.1188
F 510.657.9388 ronbow.com