Ronbow GENOVA 066230 Assembly instructions

INSTALLATION AND CARE GUIDE
GENOVA VANITY
066230
066236
066248
066260

170721ronbow.comINSTALLATION SHEET
1
GENOVA Vanity
Model : 066230
066236
066248
066260
Tools Required
Materials Included
Materials Required
3 wood screws
1 2x4 beam cut to size
1 vanity
4 legs
4 leg levelers

170721ronbow.comINSTALLATION SHEET
2
GENOVA Vanity
Model : 066230
066236
066248
066260
Determine the ideal location of your
new vanity.
Note: Check if the location has at least
two studs. Front notch the studs and
install a 2x4 horizontal beam. This will
add stability for the vanity.
Step 1:
PRE-INSTALLATION
See Figure 1.
Figure 1.
Screw on the leg leveler to the vanity
leg.
Then, Carefully lay down the vanity
and screw on the vanity leg
NOTE: TEAMWORK REQUIRED
Step 1:
ASSEMBLE THE VANITY LEG
See Figure 2.
Figure 2.

170721ronbow.comINSTALLATION SHEET
3
GENOVA Vanity
Model : 066230
066236
066248
066260
Step 2:
Step 4:
Step 3:
Install the sink to the vanity top per
the manufacturer’s instructions.
Follow the directions on the silicone
tube to allow for ample drying time.
Refrain from moving/using the
vanity during this time.
Apply a thin bead of silicone to the
surface of the vanity.
Carefully place the vanity top on
the vanity.
Clean o any excess
silicone immediately.
Clean the surface of the cabinet with a
damp cloth.
Step 1:
INSTALL THE VANITY TOP
See Figure 4.
Figure 4.
Step 2: Attach the vanity to the wall with
wood screws into the horizontal beam.
INSTALL THE VANITY- Continue
See Figure 3.
Figure 3.
Leveler

170721ronbow.comINSTALLATION SHEET
4
GENOVA Vanity
Model : 066230
066236
066248
066260
Figure 5.
Locate the screw nearest the hinge
cup and rotate clockwise or counter-
clockwise to move the door from side
to side.
Locate the screw furthest away from
the hinge cup and turn the screw
clockwise or counter-clockwise to
move the door from front to back.
Locate the screw pictured in Figure 6.
Turn the screw clockwise or counter-
clockwise to move the door from top
to bottom.
ADJUST DOOR HINGE
Figure 6.
Figure 7.
NOTE: When adjusting the door hinges keep in mind
to adjust the other hinges.
Side to Side
Front to Back
Top to Bottom
See Figure 5.
See Figure 6.
See Figure 7.
Side
Depth
Height

170721ronbow.comINSTALLATION SHEET
5
GENOVA Vanity
Model : 066230
066236
066248
066260
Damper
Pushout
Damper
ClickIn
Install the damper by clip on from the
back and click in at the front.
Then push towards the direction of the
door and push out.
INSTALL & REMOVE THE DAMPER
INSTALL THE DAMPER
See Figure 8.
See Figure 9.
https://youtu.be/VIAiReORGCg
Figure 8.
Figure 9.
CONNECT THE HINGE
Connect the hinge by push the hook
into the slot and push until hear a click
sound.
INSTALL
See Figure 10.
Cup
Hook
Bracket
Figure 10.

170721ronbow.comINSTALLATION SHEET
6
GENOVA Vanity
Model : 066230
066236
066248
066260
Figure 11.
Step 2: Slide and lift up the drawer box.
Pull the release latches located
underneath the drawer.
Slide drawer box in until secured by rail
hook.
See Figure 12.
See Figure 11.
See Figure 13.
Step 1:
Step 1:
REMOVE DRAWER
REINSTALL DRAWER
Figure 12.
Figure 13.
Hook
https://youtu.be/4DdK3cj3sTU

GENOVA Vanity
Model : 066230
066236
066248
066260
40650 Encyclopedia Circle
Fremont, CA 94538
T 510.713.1188
F 510.657.9388 ronbow.com
Wood Surfaces
Recommended Products
The fine furniture finish of your new vanity, mirror or other bathroom accessories are designed to
protect against normal home use. With proper care, your product will provide years of use and beauty
in your home.
General Care Tips
PRODUCT CARE AND MAINTENANCE
• If a spill occurs, clean and dry the surface immediately as liquid can soak through the surface and cause
greater damage.
• Do not place in direct sunlight. Exposure to sunlight may affect the appearance of your vanity, and the
finish will eventually crack.
• Keep away from direct sources of extreme temperatures as heat, cold or moisture from humidity.
Color changes, or blemishes in the wood can occur if recommended care of is not met. Try to avoid
these extremes.
• Most wood surfaces can be cleaned, or dusted, with any commercial wood cleaning product. For general
cleaning, use a non-abrasive, or lint-free cloth while dusting along the wood grain to preserve the
wood’s chacteristics.
• Pledge Orange Oil, or similar
• Orange-Glo Wood Cleaner
DISCLAIMERS: Wood naturally ages, darkens and changes color over time due to several environmental conditions that may cause materials to vary from their
original color and/or to warp, split or crack. These variations are considered to be the nature of the material in relation to their environmental exposure and may
be significant over a long period of time. The eectiveness of cleaning Ronbow product is dependant on various factors that include sunlight, smoke, moisture,
household cleaners and/or amount of cleaning product used over time. Ronbow cannot guarantee that the above Product Care & Maintenance methods will
eectively clean your product.
• Test cleaning product on small, discrete area prior to applying to entire surface.
• Wipe surfaces frequently with dry, soft, non-abrasive and lint-free towel.
• Do not allow liquids and moisture to accumulate on the surface of products.
• For warranty information, please visit our website at www.ronbow.com or contact the Customer Service
Department at [phone].