Ronbow E025023 Assembly instructions

INSTALLATION AND CARE GUIDE
FREE METAL MIRROR
E025023
E025121
E025131

161102ronbow.eu | ronbow.comINSTALLATION SHEET
1
Model :
FREE Metal Mirror
Designed By: DANELONMERONI | UK
E025023
E025121
E025131
Tools Required
PRE-INSTALLATION
Materials Included
E025023 | E025121
1 set of wall cleats
5 long screws
E025131
1 set of wall cleats
4 long screws

161102ronbow.eu | ronbow.comINSTALLATION SHEET
2
Model :
FREE Metal Mirror
Designed By: DANELONMERONI | UK
E025023
E025121
E025131
Figure 1.
Step 2:
Step 3:
Secure the wall cleat to the wall with
the long screws provided.
Verify the wall cleat is level.
Secure the cleat in the back of the
mirror to the wall cleat.
Determine the ideal location of your
new LED mirror.
Mark the locations for the long screws
to hang the wall cleat.
NOTE: It is highly recommended the
location of the mirror is at least 1” from
the faucet.
See Figure 1.
See Figure 2.
See Figure 3.
Step 1:
INSTALLATION
Figure 2.
Figure 3.

161102ronbow.eu | ronbow.comINSTALLATION SHEET
3
Model :
FREE Metal Mirror
Designed By: DANELONMERONI | UK
E025023
E025121
E025131
Glass Surfaces
The fine furniture finish of your new vanity, mirror or other bathroom accessories are designed to
protect against normal home use. With proper care, your product will provide years of use and beauty
in your home.
General Care Tips
PRODUCT CARE AND MAINTENANCE
• Test cleaning product on small, discrete area prior to applying to entire surface.
• Wipe surfaces frequently with dry, soft, non-abrasive and lint-free towel.
• Do not allow liquids and moisture to accumulate on the surface of products.
• For warranty information, please visit our website at www.ronbow.com or contact the Customer Service
Department at [phone].
• Clean up any spills or liquids immediately. Never allow liquids of any kind to remain on surface as it may
form buildup and deposits.
• DO NOT use abrasive brushes, sponges or cleaners as they may scratch and damage the surface.
• Do not use ol or any oil-based cleaners on the glass as this may remove the frosted finish.
DISCLAIMERS: Clear glass will tend to have a greenish tint. This is a natural feature and not a defect. Eectiveness of cleaning your Ronbow products is dependent
on various factors that include: water temperature, concentration and/or amounts of cleansers. Because of these many dierent conditions, Ronbow cannot
guarantee that the above Product Care & Maintanence methods will eectively clean your product.

161102
40650 Encyclopedia Circle
Fremont, CA 94538
T 510.713.1188
F 510.657.9388 ronbow.eu | ronbow.com