Ronbow SIGNATURE MARCO E056111 Assembly instructions

INSTALLATION AND CARE GUIDE
MARCO SIDE CABINET
E056111
E056114
E056123
E056124

170707ronbow.eu | ronbow.comINSTALLATION SHEET
1
Model :
MARCO Side Cabinet
Designed By: RAMON ESTEVE | SPAIN
E056111
E056114
E056123
E056124
Tools Required
PRE-INSTALLATION
Materials Included
4 anchors
8 short screws
2 set of anti-tipping hardware
4 leg levelers

170707ronbow.eu | ronbow.comINSTALLATION SHEET
2
Model :
MARCO Side Cabinet
Designed By: RAMON ESTEVE | SPAIN
E056111
E056114
E056123
E056124
Figure 1.
Determine the ideal location of your
new side cabinet.
Mark the location of x, y on the wall.
Then use the anti-tipping hardware
base plate (shown on the right) as a
guide to mark the anchor location.
Drill 1/4” anchor holes and screw into
the drywall.
Secure the anchors into the wall, and
then fasten the screws provided into
the anchor to secure the base plate.
Secure the matching plate to the
cabinet with the screws provided.
Slide the zip ties provided through
the loop and secure the cabinet to the
wall.
Note: Some minor adjustments may be
needed to level the side cabinet to
the floor.
Turn the leg levelers at the bottom of
each leg to ensure the side cabinet
is level.
Verify with a level.
See Figure 1.
See Figure 2.
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
INSTALL ANTI-TIPPING HARDWARE base plate
Y
Y
12
Leveler

170707ronbow.eu | ronbow.comINSTALLATION SHEET
3
Model :
MARCO Side Cabinet
Designed By: RAMON ESTEVE | SPAIN
E056111
E056114
E056123
E056124
Figure 3.
Locate the screw nearest the hinge
cup and rotate clockwise or counter-
clockwise to move the door from side
to side.
Locate the screw furthest away from
the hinge cup and turn the screw
clockwise or counter-clockwise to
move the door from front to back.
Locate the screw pictured in Figure 6.
Turn the screw clockwise or counter-
clockwise to move the door from top
to bottom.
ADJUST DOOR HINGE
Figure 4.
Figure 5.
NOTE: When adjusting the door hinges keep in mind
to adjust the other hinges.
Side to Side
Front to Back
Top to Bottom
See Figure 3.
See Figure 4.
See Figure 5.
Side
Depth
Height

170707ronbow.eu | ronbow.comINSTALLATION SHEET
4
Model :
MARCO Side Cabinet
Designed By: RAMON ESTEVE | SPAIN
E056111
E056114
E056123
E056124
Wood Surfaces
Recommended Products
The fine furniture finish of your new vanity, mirror or other bathroom accessories are designed to
protect against normal home use. With proper care, your product will provide years of use and beauty
in your home.
General Care Tips
PRODUCT CARE AND MAINTENANCE
• If a spill occurs, clean and dry the surface immediately as liquid can soak through the surface and cause
greater damage.
• Do not place in direct sunlight. Exposure to sunlight may affect the appearance of your vanity, and the
finish will eventually crack.
• Keep away from direct sources of extreme temperatures as heat, cold or moisture from humidity.
Color changes, or blemishes in the wood can occur if recommended care of is not met. Try to avoid
these extremes.
• Most wood surfaces can be cleaned, or dusted, with any commercial wood cleaning product. For general
cleaning, use a non-abrasive, or lint-free cloth while dusting along the wood grain to preserve the
wood’s chacteristics.
• Pledge Orange Oil, or similar
• Orange-Glo Wood Cleaner
DISCLAIMERS: Wood naturally ages, darkens and changes color over time due to several environmental conditions that may cause materials to vary from their
original color and/or to warp, split or crack. These variations are considered to be the nature of the material in relation to their environmental exposure and may
be significant over a long period of time. The eectiveness of cleaning Ronbow product is dependant on various factors that include sunlight, smoke, moisture,
household cleaners and/or amount of cleaning product used over time. Ronbow cannot guarantee that the above Product Care & Maintenance methods will
eectively clean your product.
• Test cleaning product on small, discrete area prior to applying to entire surface.
• Wipe surfaces frequently with dry, soft, non-abrasive and lint-free towel.
• Do not allow liquids and moisture to accumulate on the surface of products.
• For warranty information, please visit our website at www.ronbow.com or contact the Customer Service
Department at [phone].