Ronbow KALI CONTEMPO 030323 Assembly instructions

Installation Sheet
www.ronbow.com Ronbow Corporation, All Rights Reserved.
KALI 23”/31”
Model: 030323
030331
Contempo Collection
Step 1 :
Note :
Step 2 :
Step 3 :
Apply adhesive caulking around the
topside of rim near the edge, Carefully
raise sink in place, align, and press firmly
See Figure 1.
For installing under counter sink with
counter top
Attach 4 undermount-clips to hold
lavatory in place
See Figure 2.
Secure top & back splash to cabinet by
using adhesive caulk.
See Figure 3.
Figure 1.
Figure 2.
Figure 3.
Counter top
Back Splash
adhesive caulking
Undermount Clip

Installation Sheet
www.ronbow.com Ronbow Corporation, All Rights Reserved.
Model: Contempo Collection
Note : For installing under counter sink with
WideAppeal Top
Step 2 :
Step 1 :
Step 3 :
Step 4 :
• For best results, clean the mounting
surfaces with a dry cleaning cloth
• To prevent over flow of adhesive, use
masking tape to tape o the edges
of the cabinet and the counter top
DO NOT DISCARD WOODEN
INSTALLATION BRACKET!
• Make sure wooden installation
bracket is safely secure
• Install under counter sink by
following specific sink installation
See Figure 1.
Apply adhesive on wood bracket and
mounting surfaces of the cabinet
See Figure 2.
Carefully place countertop on to the
cabinet, align, and press firmly
See Figure 3.
Figure 1.
Figure 2.
Figure 3.
adhesive caulking
1. Wooden
installation
bracket
2. Undercounter sink
!
KALI 23”/31”
030323
030331

Installation Sheet
www.ronbow.com Ronbow Corporation, All Rights Reserved.
Model: Contempo Collection
Note : For installing Ceramic Sinktop
Step 1 :
Step 2 :
Step 3 :
Step 4 :
Place adhesive around top of cabinet
See Figure 1.
Place a generous portion of plumbers’
putty under drain cap and insert
whole drain body inside the bowl and
through the countertop
(There may be a small beveled rubber
washer packaged with your drain, please
discard this and use plumbers’ putty instead)
See Figure 2.
From under the drain, insert the thick
rubber washer and screw on and
tighten the metal nut. Remove excess
plumbers’ putty
See Figure 3.
Attach p-trap to tailpiece
Figure 1.
Figure 2.
Figure 3.
Drain Cap
Overflow hole
Metal Nut
Thick rubber
washer
Tailpiece
Drain Nut
Tailpiece
Thick rubber
washer
P-trap
Drain
KALI 23”/31”
030323
030331