Royalcraft Palma User manual

Palma Square 4 Seater
Dining Set with Padded Chairs – Table
Assembly Instructions
Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 1 / 5
www.ro
y
alcraft.co.uk
Product size:
L90*W90*H74 cm
This product is for Domestic use only!
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY

Palma Square 4 Seater
Dining Set with Padded Chairs – Table
Assembly Instructions
ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd.  2 / 5

www.ro
y
alcraft.co.uk
Before you start
Warnings
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
See enclosed instructions for assembly, safety and care
information.
Failure to follow the warnings could result in serious injury.
Handle heavy parts with care.
Ensure that this product is fully assembled as illustrated before
use.
This product should only be used on firm, level ground.
The product contains small parts which could
pose a risk to young children. Keep small parts
out of reach of children.
Do not stand or climb onto this product.
This product is intended for domestic use only.
Ensure the product is always placed on level ground.
Furniture can be dangerous if incorrectly used. No liability will be
accepted for damage or injury caused by incorrect use of this
product.
This table is not intended to support a parasol separately. A
parasol base with suitable weight must be used to support
your parasol.
Dos
When you are ready to start, make sure that you have the right
tools, plenty of space and a clean, dry area for assembly.
Unwrap all packaging materials and place the components on
suitable surface to prevent scratching your product.
Check the pack and make sure you have all of the parts listed.
Check all screws and bolts are tightened and inspect regularly.
We recommend the use of furniture covers to protect your product
when not in use.
During bad weather or in winter months, the product should be
stored in a cool, dry place. Before storage, ensure that the product
is clean and dry.
To clean, wipe down with a sponge and warm soapy water and
wipe with a clean, dry cloth.
When cleaning glass panels use a damp cloth or leather with
washing up liquid or soft soap if necessary.
Don’ts
Do not stand or climb onto the product.
Do not use power tools to construct this product.
Do not sit or lean onto the rims of this product.
Do not use this product if parts are missing, damaged or worn.
Never use scourers, abrasives or chemical cleaner.
Do not use this product as a ladder as this could lead to the
product becoming unbalanced and overturning.
Do not place very hot or very cold items directly on the
glass surfaces unless adequately thick table-mats are used to
prevent such items from coming into contact with the glass.
Do not use the glass as a chopping surface.
Do not strike glass with hard or pointed items.
Do not use washing powders or any other substances containing
abrasives since these substances scratch the glass.
Dot use this product if the glass is chipped or broken.
Never drag furniture when moving it, always lift it.
Number of people required for assembly
Two people
Time to assemble
30 minutes
Tools required
Tips:
It is best not to fully tighten the nuts and
bolts until they are all correctly located.
Only carefully tighten them when you are
satisfied with the alignment of all
components.
Be careful not to overtighten.

Palma Square 4 Seater
Dining Set with Padded Chairs – Table
Assembly Instructions
Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 3 / 5
www.ro
y
alcraft.co.uk
Components, fixtures & fittings (not actual size)
Parts List
Part
No. Diagram Qty. Part No. Diagram Qty.
A
Table Top Frame
1 PC B
Table Leg
4 PCS
C
Glass Top
1 PC D
Bolt
8 PCS
E
Spring Washer
8 PCS F
Washer
8 PCS
G
Bolt Head Cap
8 PCS H
Allen Key
1 PC

Palma Square 4 Seater
Dining Set with Padded Chairs – Table
Assembly Instructions
Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 4 / 5
www.ro
y
alcraft.co.uk
Step by step assembly instructions
Step One
Place the Glass Top (C) at a safe, flat surface, don’t let it hinder the assembly of other
components.
With the help of another person, place Table Top Frame (A) upside down on a flat,
non-abrasive surface to avoid scratching the table surface or rim.
Step Two
Attach the Table Legs (B) onto the Table Top Frame (A) using Washers (F), Spring Washers (E)
and Bolts (D).
Only tighten the bolts when all bolts and washers are in place and turn freely. Once you are
satisfied with the alignment of the components, carefully tighten all bolts using Allen Key (H).
Do not over-tighten.
Cover each bolt with Bolt Head Caps (G).
G
D
E
FA
B
A
B

Palma Square 4 Seater
Dining Set with Padded Chairs – Table
Assembly Instructions
Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 5 / 5
www.ro
y
alcraft.co.uk
Step Three
With the help of another person, carefully turn over the table frame and place it in the upright
position.
Carefully place the Glass Top (C) onto the Table Top Frame (A), make sure they match each
other.
Step Four
There are adjustable feet screws at the bottom of the legs.
Make sure there is no wobbling by adjusting the feet screws when the table is placed on the flat
ground.
Your table is now ready for use.
Note: This table is not designed to hold the parasol separately.
Parasol base with suitable weight should always be used.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
C
A