Ruijie Reyee RG-NBR-E Series Installation and operating manual

Ruijie Reyee RG-NBR-E Series Routers
Hardware Installation and Reference Guide
Document Version: V1.0
Date: November 1, 2022
Copyright © 2022 Ruijie Networks

Copyright
Copyright © 2022 Ruijie Networks
All rights are reserved in this document and this statement.
Without the prior written consent of Ruijie Networks, any organization or individual shall not reproduce, extract,
back up, modify, or propagate the content of this document in any manner or in any form, or translate it into other
languages or use some or all parts of the document for commercial purposes.
,, and other Ruijie networks logos
are trademarks of Ruijie Networks.
All other trademarks or registered trademarks mentioned in this document are owned by their respective owners.
Disclaimer
The products, services, or features you purchase are subject to commercial contracts and terms, and some or
all of the products, services, or features described in this document may not be available for you to purchase or
use. Except for the agreement in the contract, Ruijie Networks makes no explicit or implicit statements or
warranties with respect to the content of this document.
The content of this document will be updated from time to time due to product version upgrades or other reasons,
Ruijie Networks reserves the right to modify the content of the document without any notice or prompt.
This manual is designed merely as a user guide. Ruijie Networks has tried its best to ensure the accuracy and
reliability of the content when compiling this manual, but it does not guarantee that the content of the manual is
completely free of errors or omissions, and all the information in this manual does not constitute any explicit or
implicit warranties.

I
Preface
Intended Audience
This document is intended for:
Network engineers
Technical support and servicing engineers
Network administrators
Technical Support
The official website of Ruijie Reyee: https://www.ruijienetworks.com/products/reyee
Technical Support Website: https://www.ruijienetworks.com/support
Case Portal: https://caseportal.ruijienetworks.com
Community: https://community.ruijienetworks.com
Technical Support Email: [email protected]
Conventions
1. Signs
This document also uses signs to indicate some important points during the operation. The meanings of these
signs are as follows:
Caution
An alert that calls attention to safety instruction that if not understood or followed can result in personal injury.
Warning
An alert that calls attention to important rules and information that if not understood or followed can result in
data loss or equipment damage.
Note
An alert that calls attention to essential information that if not understood or followed can result in function
failure or performance degradation.
Instruction
An alert that contains additional or supplementary information that if not understood or followed will not lead to
serious consequences.
Specification
An alert that contains a description of product or version support.

II
2. Note
This manual provides installation steps, troubleshooting, technical specifications, and usage guidelines for
cables and connectors. It is intended for users who want to understand the above and have extensive experience
in network deployment and management, and assume that users are familiar with related terms and concepts.

Hardware Installation and Reference Guide Product Overview
i
Contents
Preface.................................................................................................................................................. I
1 Product Overview.............................................................................................................................. 1
1.1 Ruijie RG-NBR-E Series Enterprise-class Routers...................................................................1
1.1.1 Ruijie RG-NBR6205-E Enterprise-class Router............................................................1
1.1.2 Ruijie RG-NBR6210-E Enterprise-class Router............................................................3
1.1.3 Ruijie RG-NBR6215-E Enterprise-class Router............................................................5
1.1.4 Ruijie RG-NBR6120-E Enterprise-class Router............................................................8
1.2 Modules....................................................................................................................................10
1.2.1 Ruijie RG-NBR-HDD-1T Hard Disk .............................................................................10
2 Preparations before Installation...................................................................................................... 12
2.1 Safety Precautions...................................................................................................................12
2.2 Requirements on Installation Environment..............................................................................12
2.2.1 Temperature/Humidity Requirements..........................................................................13
2.2.2 Cleanliness Requirements...........................................................................................13
2.2.3 Anti-Static Requirements.............................................................................................14
2.2.4 Anti-Interference Requirements...................................................................................14
2.2.5 Checking the Installation Location...............................................................................15
2.3 Installation Tools and Devices.................................................................................................15
3 Installing the Enterprise-class Router............................................................................................. 16
3.1 Installation Procedure of Enterprise-class Router...................................................................16
3.2 Mounting the Enterprise-class Router.....................................................................................16
3.2.1 Mounting into a Cabinet...............................................................................................17
3.2.2 Mounting on a Workbench...........................................................................................17

Hardware Installation and Reference Guide Product Overview
ii
3.3 Installing Power Cables...........................................................................................................17
3.4 EMC Grounding.......................................................................................................................17
3.5 Checking after the Installation .................................................................................................18
4 Starting and Configuring the Enterprise-class Router.................................................................... 19
4.1 Starting a Enterprise-class Router...........................................................................................19
4.1.1 Building Configuration Environment............................................................................19
4.1.2 Powering on the Enterprise-class Router....................................................................21
4.1.3 Starting Process...........................................................................................................22
4.2 Starting the Enterprise-class Router........................................................................................23
5 Troubleshooting............................................................................................................................... 24
5.1 Power Supply Troubleshooting................................................................................................24
5.2 Configuration System Troubleshooting...................................................................................24

Hardware Installation and Reference Guide Product Overview
1
1 Product Overview
Ruijie RG-NBR-E series enterprise-class routers employ the global-leading semiconductor technologies and
communication control technologies.The enterprise-class routers are completely developed as per international
standards and are similar to the mainstream enterprise-class routers in the international market. By reading this
manual, network administrator being familiar with mainstream enterprise-class router configuration commands
can easily use this product without training.
1.1 Ruijie RG-NBR-E Series Enterprise-class Routers
1.1.1 Ruijie RG-NBR6205-E Enterprise-class Router
1. Appearance of Ruijie RG-NBR6205-E Enterprise-class Router
Figure 1-1 Front Panel of Ruijie RG-NBR6205-E Enterprise-class Router
Figure 1-2 Backpanel of Ruijie RG-NBR6205-E Enterprise-class Router
2. Specifications of Ruijie RG-NBR6205-E Enterprise-class Router
Table 1-1 Specifications of Ruijie RG-NBR6205-E Enterprise-class Router
Item
Description
Storage
DDR4 SDRAM: 2 GB
BOOTROM: 8 MB
eMMC: 8 GB
SATA: 1 TB (Optional)
I/O Setup
8 copper ports. Supports 8 10/100/1000 M (copper) fast Ethernet ports and
automatic recognition of network cables and cross-over cables.
By default, ports LAN0, LAN1, LAN2, LAN3, LAN4 and LAN5 are LAN ports,
while ports WAN0 and WAN1 are WAN ports.

Hardware Installation and Reference Guide Product Overview
2
Ports LAN1, LAN2, LAN3, LAN4, LAN5 and WAN1 support WAN/LAN
switchover.
2 SFP ports. Supports 1000BASE-SX/LX/ZX mini GBIC and GE-SFP-
LX20/LH40-BIDI SPF modules.
By default, the SFP ports are WAN ports, and support WAN/LAN switchover.
1 management port (in bridging mode)
1 console port
2 USB ports
Hardware Disk Module
1 hardware disk module (optional)
Hot Swapping
Hot swapping of hardware disk module: not support
Interface Standard
Ethernet: 10Base-T/100Base-TX/1000Base-TX, 1000BASE-SX/LX/ZX,
10GBASE-SR/LR/ZR
Console port: RS-232
Dimension (W x H x D)
440 mm x 43.6 mm x 200 mm (excluding the foot pad)
Voltage
100–240 V; 50/60 Hz
Power Consumption
Less than 25 W
Working Environment
Temperature: 0°C to 45°C (32°F to 113°F)
Humidity: 10% to 90% RH (non-condensing)
Instruction
Not all USB disks are supported. The Kingston USB disk with FAT 32 is recommended.
Note
Please avoid the vibration and collision in the process of moving and usage.
To power off the device with the hard disk module inserted, please turn off the power button. Do not
remove the power cable until the PWR LED turns off, or else the hardware disk will be damaged.
3. LED Indicators of Ruijie RG-NBR6205-E Enterprise-class Router
Table 1-2 LED Indicators of Ruijie RG-NBR6205-E Enterprise-class Router
LED Indicators
Working Status
PWR
Solid green indicates the device is receiving power properly.
Off indicates the power module is faulty or not powered on.
SYS
Blinking green indicates the system is being initialized.

Hardware Installation and Reference Guide Product Overview
3
Solid green indicates system initialization has completed.
Solid red indicates system warning.
SATA
Solid green indicates the SATA hard disk is inserted.
Blinking green indicates data reading/writing.
Link/ACT Indicators of
0-7 Copper Ports
Solid green indicates that the port is connected at 10/100/1000 Mbps.
Blinking green indicates that the port is receiving or transmitting traffic at
10/100/1000 Mbps.
Speed Indicators of 0-
7 Copper Ports
Solid orange indicates that the port is connected at 1000 Mbps.
Off indicates that the port is connected at 10/100 Mbps.
Indicators of 8F-9F
SFP Ports
Solid green indicates that the port is connected.
Blinking green indicates that the port is receiving or transmitting traffic.
1.1.2 Ruijie RG-NBR6210-E Enterprise-class Router
1. Appearance of Ruijie RG-NBR6210-E Enterprise-class Router
Figure 1-3 Front Panel of Ruijie RG-NBR6210-E Enterprise-class Router
Figure 1-4 Backpanel of Ruijie RG-NBR6210-E Enterprise-class Router
2. Specifications of Ruijie RG-NBR6210-E Enterprise-class Router
Table 1-3 Specifications of Ruijie RG-NBR6210-E Enterprise-class Router
Item
Description
Storage
DDR4 SDRAM: 2 GB
BOOTROM: 8 MB
eMMC: 8 GB
SATA: 1 TB (Optional)

Hardware Installation and Reference Guide Product Overview
4
I/O Setup
8 copper ports. Supports 8 10/100/1000 M (copper) fast Ethernet ports and
automatic recognition of network cables and cross-over cables.
By default, ports LAN0, LAN1, LAN2, LAN3, LAN4 and LAN5 are LAN ports,
while ports WAN0 and WAN1 are WAN ports.
Ports LAN1, LAN2, LAN3, LAN4, LAN5 and WAN1 support WAN/LAN
switchover.
2 SFP ports. Supports 1000BASE-SX/LX/ZX mini GBIC and GE-SFP-
LX20/LH40-BIDI SPF modules.
By default, the SFP ports are WAN ports, and support WAN/LAN switchover.
1 management port (in bridging mode)
1 console port
2 USB ports
Hardware Disk Module
1 hardware disk module (optional)
Hot Swapping
Hot swapping of hardware disk module: not support
Interface Standard
Ethernet: 10Base-T/100Base-TX/1000Base-TX, 1000BASE-SX/LX/ZX,
10GBASE-SR/LR/ZR
Console port: RS-232
Dimension (W x H x D)
440 mm x 43.6 mm x 200 mm (excluding the foot pad)
Voltage
100–240 V; 50/60 Hz
Power Consumption
Less than 25 W
Working Environment
Temperature: 0°C to 45°C (32°F to 113°F)
Humidity: 10% to 90% RH (non-condensing)
Instruction
Not all USB disks are supported. The Kingston USB disk with FAT 32 is recommended.
Note
Please avoid the vibration and collision in the process of moving and usage.
To power off the device with the hard disk module inserted, please turn off the power button. Do not
remove the power cable until the PWR LED turns off, or else the hardware disk will be damaged.