Ruijie Reyee RG-M18 User manual

Reyee RG-M18 Mesh Router

1 - 6
7 - 11
12 - 17
18 - 23
24 - 29
30 - 35
36 - 41
42 - 47
Manual do utilizador 48 - 53
54 - 59
Benutzerhandbuch 60 - 65
Manuale d'uso 66 - 71
Manuel d'utilisation 72 - 77

RG-M18 Mesh Router
User Manual
1
Package Contents
Product Appearance
Reset Button Power WAN LAN1/LAN2
Router
Name Quantity
Power Adapter
Warranty Card
User Manual
Network Cable
1
1
1
1
1
Reyee Mesh Indicator
Status Description
Blinking white The device is being paired.
Four bars are solid white The Mesh network signal is excellent.
Three bars are solid white N/A
Two bars are solid white The Mesh network signal is average.
One bar is solid white The Mesh network signal is poor.
Off The Mesh network is disconnected or not
set up.

2
Status Description
Solid blue The device is working normally and can
access to the Internet
Solid orange The device does not access the Internet.
Blinking blue
The device is starting up or restoring the
factory settings.
System Status Indicator (Reyee Mesh Button)
Scenario 1: Configure one router to access the Internet
1.Connect the Power Cord and Ethernet Cable.
2. Configure the router.
After the power cord and Ethernet cable are connected,the router will complete startup in 2 to 3
minutes. Wait until the system status indicator turns solid on and the SSID is broadcast
(default SSID: @Ruijie-sXXXX).
XXXX is the last 4 digits of the MAC address on the label of router.
S/N: G1XXXXXXXXXXX
MAC: XXXXXXXXXXXX
3200M Wi-Fi 6 Dual-band Mesh Router
SSID :
Default Management Address: 192.168.110.1
https://www.ireyee.com/support
Model: RG-M32
Input: 12V 2.5A
Version: V1.00
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC ID: IC: CAN ICES-003 (B)/NMB-003(B)
Download Reyee Router

-
-
3
XXXX is the last 4 digits of the MAC address
on the nameplate of router .
S/N: G1XXXXXXXXXXX
MAC: XXXXXXXXXXXX
3200M Wi-Fi 6 Dual-band Mesh Router
SSID :
Default Management Address: 192.168.110.1
https://www.ireyee.com/support
Model: RG-M32
Input: 12V 2.5A
Version: V1.00
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC ID: IC: CAN ICES-003 (B)/NMB-003(B)
Download Reyee Router
@Ruijie-sXXXX
xxxxx-xxxxxxxx
xxxxx-xxxxxxxx
Wi-Fi
xxxxx-xxxxxxxx
Access the Internet by Web
The router automatically detects the type of Internet connection.Please
configure the network parameters accordingly.
Connect to the new Wi-Fi name (SSID) after it appears in the Wi-Fi list for lnter-
net access.
For more information, please access https://www.ruijienetworks.com/support
Open your phone settings page and choose Wi-Fi network
@Ruijie-sXXXX. The configuration page will appear automatically. Or you
can access 192.168.110.1 via browser.

4
Access the Internet by App
Download the Reyee Router App Create an account
Tap , follow the guide of configuration
Scenario 2: Configuring multiple routers to set up a Reyee Mesh Network
To cover every corner of a penthouse, duplex house, or a villa , you can buy multiple
Reyee Mesh routers to form a wireless network for seamless roaming .Mesh routers
to form a mesh network for full-house coverage.
Please refer to Scenario 1 for configuration.
1.
Wait for 2 to 3 minutes until the system status indicator on the secondary router turns
steady on.
2. Place the secondary router within 2 meters (around 6.56 ft)
from the primary router, and power it on
Login/Register
Connect the primary router to the Internet
3. Press the Reyee Mesh button on the primary router for pairing
The Reyee Mesh indicator on the primary router blinks white , indicating that the
primary router is searching nearby routers for pairing .The Reyee Mesh indicator
on the secondary router also blinks white , indicating the secondary router is
being paired with the primary router.

5
After about 2 minutes, the Reyee Mesh indicators on both routers turn steady
white . The default Wi-Fi on the secondary router disappears, and the Wi-Fi name
and password are synchronized with the primary router, indicating that the pairing
is complete .
4. Move the secondary router to an area where Wi-Fi coverage is
required , and power it on again
Reyee Mesh Button
Please find the proper location for both routers. Do not place two routers too far
away from each other and avoid too many walls or other obstacles between them.
Determine the placement and distance by referring to the signal strength visualized
by Reyee Mesh indicators on the top.
If you have three or more routers, you can repeat step 2 to 4 to connect them . A
Reyee Mesh network consists of up to five routers (one primary router and four
secondary routers).

6
FAQs
What can I do if I forget the management password?
Try the Wi-Fi password which may be the same as the management password.
If it does not work, please restore the device to factory settings.
How to restore the factory settings?
Power on the router and wait for 2 to 3 minutes until it is started. Use
a pin to press and hold the Reset button on the rear side for over 10 seconds until
the system status indicator starts blinking, and then release the button.
After the system status indicator turns solid on, the router will broadcast SSID
@Ruijie-sXXXX,
indicating that the router is restored to factory settings successfully.
Can I connect routers with Ethernet cables?
Yes, and wired connection is more stable. Insert one end of the Ethernet cable
into the WAN port (yellow) of the secondary router and connect the other end
to the LAN port (black) of the primary router.

7
WAN LAN1/LAN2
1
1
1
1
1
N/A
/