Ruijie Reyee RG-EW1200G PRO User manual

Ruijie RG-EW1200G PRO Wireless Router
Quick Installation Guide

1
Copyright Statement
Ruijie Networks©2021
Ruijie Networks reserves all copyrights of this document. Any reproduction, excerption, backup, modification,
transmission, translation or commercial use of this document or any portion of this document, in any form or by any means,
without the prior written consent of Ruijie Networks is prohibited.
Exemption Statement
This document is provided “as is”. The contents of this document are subject to change without any notice. Please obtain
the latest information through the Ruijie Networks website. Ruijie Networks endeavors to ensure content accuracy and will
not shoulder any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

2
Preface
Thank you for using our products. This manual will guide you through the installation of the device.
Audience
It is intended for the users who have some experience in installing and maintaining network hardware. At the same time, it
is assumed that the users are already familiar with the related terms and concepts.
Obtaining Technical Assistance
Ruijie Networks Website: https://www.ruijienetworks.com/
Technical Support Website: https://ruijienetworks.com/support
Case Portal: https://caseportal.ruijienetworks.com
Community: https://community.ruijienetworks.com
Technical Support Email: [email protected]
Skype: [email protected]
Symbol Conventions
Means reader take note. Notes contain helpful suggestions or references.
Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of
data.

RG-EW1200G PRO Wireless Router Quick Installation Guide
3
For better use of Reyee products, please read this guide before installation
1 Packing List
Name
Quantity
Unit
Router
1
Set
Power Adapter
1
Piece
Warranty card
1
Copy
Quick Installation Guide
1
Copy
2 Product Appearance
Figure 2-1 Product Appearance
Note:
1. System status indicator
2. Pairing/Reset button
(press >10s to reset
press <1s to pair)
3. Power port
4. WAN port/Indicator
5. LAN1-3 port/Indicator
3 Quick Installation
Access the Internet in only 3 steps.
1. Insert the cable which connects to the Internet to the yellow port, and power on the router.
1
2
3
4
5

RG-EW1200G PRO Wireless Router Quick Installation Guide
4
2. Access the Internet
Connect to the SSID “@Ruijie-sxxxx” or “@Ruijie-mxxxx” (xxxx is the last 4 digits of MAC address) by mobile phone or PC.
The configuration page will be displayed automatically, or you can visit 192.168.110.1 by browser.
WLAN Browser
If you can not connect to the SSID or visit the website, please scan the QR-code on the back of package for online
support.
3. Configuration Completes
Complete all configuration according to the guide. When "Configuration succeeded" is displayed, you can access the
Internet.
SSID you have configured
Power
Internet

RG-EW1200G PRO Wireless Router Quick Installation Guide
5
4 Reyee Mesh Router Connection
Reyee Mesh router can connect with each other to form a distributed network.
1. Connect the main router to the Internet
Please refer to the Quick Installation for configuration.
This router is used as the main router of the distributed network, and other Reyee Mesh routers are secondary routers.
2. One-click connection
Please make sure that the routers to be paired are in the factory settings. If they are configured before, restore the factory
settings first (see the FAQ for how to restore the factory settings). Do not connect the network cable to the routers.
Power on the routers within 2 meters of the main router, and their indicators will start to blink quickly. Wait for a period of
time, the system indicators will turn to steady on, which means the routers are on. Press the Pairing button on the main
router, and its system indicator will start to blink. The main router will search for neighboring secondary routers for 2
minutes. After the search is over, the system indicator changes to steady on. When the system indicators on the
secondary routers blink, it means that two routers are being paired; when the system indicator changes to steady on, the
pairing completes.
3. Move the paired Reyee Mesh routers to the positions where the signal needs to be expanded, and power them on.
No more configuration is required.
After the router is powered on, the system indicator blinks, which means it is connecting to the main router. When the
system indicator turns to steady on, the connection is successful, and a distributed WiFi network can be constructed.
Figure 4-1 Main Router
Ensure the router can access the Internet. After pressing the button, the system indicator starts blinking. As the
detection ends after 2 minutes, it will stop blinking.

RG-EW1200G PRO Wireless Router Quick Installation Guide
6
Figure 4-2 Secondary Router
Do not connect with network cable. During pairing, the system indicator blinks. If pairing succeeds, it will stop
blinking.
5 LEDs
LED
Status
Description
System Status
Indicator
Off
The router is not powered on.
Steady On
The router is running normally.
Fast Blinking
Restoring factory settings/Rebooting.
Slow Blinking
Reyee Mesh is being paired or repeater stops.
Port Indicator
Off
The port is not connected or the cable disconnects.
Steady On
The port is connected normally.
Blinking
Data is being transmitting.
6 FAQs
Why can't I visit 192.168.110.1?
1. Check whether NIC is configured as DHCP.
2. Ensure the computer is connected to any of the LAN ports and the indicator is on; otherwise you may change the
cable and have a try again.
3. Re-open the browser (recommend to use Google Chrome) and visit 192.168.110.1 again.
4. Change the browser.
5. Change the cable or computer.
6. If all these methods fail, please restore the factory settings (hold the Reset button for 10s).
Why can't I access the Internet after configuration?
1. Check whether the cable is connected as the instruction, and the indicator is on.
2. Check the Internet connection type.

RG-EW1200G PRO Wireless Router Quick Installation Guide
7
a. If your ISP offers an account/password, please select PPPoE and enter your account/password.
b. If your ISP offers the static IP address, subnet mask, gateway and DNS, please select Static IP and enter the
information.
3. If you still can not access the Internet, please contact your ISP.