Ruijie RG-N18000-X Series Installation and operating manual

Ruijie RG-N18000-X Series Switches
Hardware Installation and Reference Guide
DocumentVersion:V1.27
Date: 2022-01-10
Copyright © 2023RuijieNetworks

Copyright
Copyright © 2023RuijieNetworks
All rights are reserved in this documentandthis statement.
Any reproduction,excerption,backup,modification,transmission,translationorcommercialuse ofthis document
orany portionofthis document,inanyform orby anymeans,withoutthepriorwrittenconsentofRuijieNetworks
is prohibited.
Trademark and are ownedby Ruijie Networks.
All othertrademarks orregisteredtrademarksmentionedinthisdocumentareownedbytheirrespective owners.
Disclaimer
The products,services,orfeatures you purchaseare subjectto commercial contracts andterms.Someorallof
the products,services or features described inthis documentmaynot be withinthe scopeofyour purchase or
use.Unless otherwiseagreedinthecontract,RuijieNetworks does notmake anyexpress or impliedstatement
or guarantee for the content of this document.
Due to product version upgrades or other reasons, the content of this document will be updated from time to
time.Ruijie Networks reserves therightto modifythe contentof the document withoutanynotice or prompt.
This manualis for referenceonly. RuijieNetworks endeavors to ensure content accuracyand willnot shoulder
any responsibilityfor lossesanddamagescausedduetocontent omissions,inaccuracies orerrors.

I
Preface
IntendedAudience
This documentis intendedfor:
Networkengineers
Technicalsupportandservice engineers
Networkadministrators
Technical Support
RuijieNetworks website:https://www.ruijienetworks.com/
Technical supportwebsite:https://ruijienetworks.com/support
Caseportal:https://caseportal.ruijienetworks.com
Community:https://community.ruijienetworks.com
Technical supportEmail:[e-mail]
Skype: [e-mail]
Conventions
1. Conversions
Convention
Description
Bold font
Commands,commandoptions,and keywords arein bold font.
Italicfont
Arguments for whichyou supplyvalues arein italicfont.
[ ]
Elements insquare brackets areoptional.
{ x | y | z }
Alternative keywords are groupedin braces andseparatedby
vertical bars.
[ x | y | z ]
Optionalalternative keywords are groupedinbrackets and
separatedbyvertical bars.
&<1-n>
The argumentbeforethesign(&) can be inputfor consecutive1- n
times.
//
Doubleslashesatthe beginning ofa line of codeindicatea
commentline.
2. Signs
The signs used inthis documentaredescribed as follows:

II
Warning
An alert that calls attentionto importantrules and informationthatif not understoodorfollowed can resultin
data loss orequipmentdamage.
Caution
An alert that calls attentionto essentialinformationthatifnot understood or followed can resultin function
failureor performancedegradation.
Note
An alert that contains additionalorsupplementaryinformation thatifnot understoodorfollowed will notlead to
serious consequences.
Specification
An alert that contains a descriptionofproductor version support.
3. Note
The manual offers configuration information (including model, port type and command line interface) for
indicative purposeonly.In case ofany discrepancyorinconsistencybetween the manualandtheactual version,
the actualversion prevails.

Ha rdwa re Installation and Reference Guide Product Overvi ew
1
1 Product Overview
RG-N18000-Xseries switchesareRuijie-developednext-generationcoreswitches.Based onmatrixseparation,theyuse
the Clos architectureandsupportalarge buffer. They supportdual supervisormodulesand redundancyof power
modules,switchfabricmodules,andfanmodules.
The RG-N18018-X: has 18transverseslots,andprovides dualsupervisormodules,16linecardslots,16power
modules,sixswitchfabricmodules,andthreefan modules.
The RG-N18010-X: has 10transverseslots,supportsdualsupervisormodules,eightlinecard slots,eightpower
modules,sixswitchfabricmodules andthreefanmodules.
The RG-N18006-X: has sixtransverse slots,supports dual supervisormodules,fourlinecardslots,four power
modules,sixswitchfabricmodules,andthree fan modules.
1.1 RG-N18018-X
Specifications
Model
RG-N18018-X
Module Slot
Two supervisormodule slots,16 linecard slots,and sixswitch fabric moduleslots
Supervisor Module
M18000X-CM II
M18000X-CM II-C
M18000X-CM X
Supervisor Module
Redundancy
Supported
Switch Fabric
Module
M18018X-FE-C II
M18018X-FE-C V
M18018X-FE-D II
M18018X-FE-E IV
Line Card
M18000X-36CQ-CB
M18000X-36QXS-CB
M18000X-18CQ-CB
M18000X-48XS2CQ-CB
M18000X-48XS-CB
M18000X-18QXS18CQ-CB
M18000X-12QXS12CQ-CB
M18000X- 6QXS6CQ-CB
M18000X- 48XT2CQ-CB
M18000X-32CQ-DB
M18000X-48CQ-CE
M18000X-48DC-CE
Hot Swapping
Supported
PowerModule
RG-PA2700I:
100V AC to 105 VAC, power:1,200 W
105V AC to 176 VAC, power:1,450 W
176V AC to 200 VAC, power:2,400 W
200V AC to 240 VAC, power:2,700 W
RG-PD2400I:
–40VDC to –72 V DC, power:2,400 W
HVDC Power Supply
RG-PA2700I: 192 V DCto 350 V DC, power: 2,700 W
The power module supports reversible HVDC. When the equipment room uses HVDC,
the HVDC-supported PDU mustbe provided.You mustfirstinsertthepowercore into the
power receivingport of the switch, andthen insertthe power cord into the PDU. Do not
do it in a reverseway.
Power Module
Redundancy
Powermodules ofthe same model areusedfor redundancy.
Fan Module
M18018X-FAN
EMC Standards
GB9254-2008CLASSA
Safety Regulation
Compliance
GB4943-2011

Ha rdwa re Installation and Reference Guide Product Overvi ew
2
Operating
Temperature
0°Cto 40°C(32°F to 104°F)
Storage
Temperature
–40°Cto +70°C(–40°F to +158°F)
Operating Humidity
10%to 90%RH (non-condensing)
Altitude
Long-term operationaltitude:3,000m (3,280yd) at 35°C (95°F)
The temperature decreasesby1°C (33.8°F) as thealtituderanging from 3,000 m(3,280 yd) to
4,000m (4,374 yd) increases by200 m (218 yd).
Maximum operating altitude:5,000 m (5,468 yd)
Maximum storagealtitude:5,000 m (5,468yd)
MTBF
235,000hours
Noise
Less than 67 dB at 27°C (80.6°F)
Less than 91 dB at 50°C (122°F)
Weight
120.88kg (266.49 lbs)
Dimensions (W x Dx
H)
Cable managementbrackets excluded:442mm x961 mm x934.5mm (17.40 in. x37.83 in. x
36.79in.), 21 RU
Cablemanagementbrackets included:442mm x1,017 mm x934.5 mm(17.40in. x 40.04 in.
x 36.79 in.), 21 RU
The weight onlyincludes that of the emptychassis and fan modules.The entire device's weightis subject to that of
the modules selected.
The RG-N18018-X is a class A product. In a domestic environment, this product may cause radio interference in
whichcasethe usermaybe requiredto take adequatemeasures.
Product Appearance
The RG-N18018-Xis composedofthe chassis,powersystem,modules,andheatdissipationsystem.
The powersystem provides 16powermodule slots andsupportspowermodulesin N+Mredundancymode.You
are advisedto configureredundancyfor powermodules.
The RG-N18018-Xprovides two supervisormodule slots,16 linecardslots,and sixswitchfabricmoduleslots.The
supervisormodulessupport1+1redundancy. You are advisedto configureredundancyfor the supervisormodules.
You canselectdifferentline cards as needed.
Fan trays are at the rear of the chassis.Line cards and supervisormodules areon thefront of the chassis.
Figure1-1 Appearanceof the RG-N18018-X

Ha rdwa re Installation and Reference Guide Product Overvi ew
3
Front Panel
Figure1-2 Front Panelof the RG-N18018-X

Ha rdwa re Installation and Reference Guide Product Overvi ew
4
Note
①Model name
②Cablemanagementbracket
③Air intakeof the powermodule
④Bracket
⑤Supervisormoduleslot
⑥Linecard slot
⑦ESD wriststrap
Ensurethatthe supervisormodule,linecard,switchfabricmodule,and powermoduleareremoved from thechassis
beforeyou move or transportthe RG-N18018-Xchassis.
Rear Panel
Figure1-3 RearPanelof the RG-N18018-X

Ha rdwa re Installation and Reference Guide Product Overvi ew
5
Note
①Powermodule
②Fan moduleslot
③ESD wriststrap jack
④Fan moduleLED
⑤Captive screws ofthe fan module
⑥Groundingpoint
Power Supply
The RG-N18018-Xadopts bothAC andDC powersupplyinput:
AC powersupplyinput: The RG-PA2700I powermodule is supported.This power modulesupports power
management.ThesupervisormoduleoftheRG-N18018-Xcan read powersupplyinformationandimplement
flexible andintelligentpowermanagement.
DC powersupplyinput:The RG-PD2400Ipowermoduleis supported.This powermodulesupports power
management.ThesupervisormoduleoftheRG-N18018-Xcan read powersupplyinformationandimplement
flexible andintelligentpowermanagement.
The RG-N18018-Xsupports powermodulesin N+Mredundancymodeto improvethe system stabilityand reliability.
You are advised to configure N+M redundancyfor powermodules.
Heat Dissipation System
The operating environmenttemperatureofthe RG-N18018-Xranges between 0°C (32°F) and 45°C (113°F). The thermal
designmustsatisfythe requirementon the device's reliabilityin the temperature rangewhileensuringthe device's safety
andmaintainability.The RG-N18018-Xuses fans todrawair for forced convectioncooling,ensuringthatthe device works
properlyinthe specifiedenvironment.
Figure1-4 Ventilation andHeat DissipationSystem ofthe RG-N18018-X(Air Intakes)

Ha rdwa re Installation and Reference Guide Product Overvi ew
6
Note:
①Air intakes for supervisormodules
②Air intakes for linecards
③Air intakes for powermodules
Figure1-5 Ventilation andHeat DissipationSystem ofthe RG-N18018-X(Exhaust Vents)