Ruijie RG-NIS3100 Series Installation and operating manual

RG-NIS3100 Series Switch
Hardware Installation and Reference Guide
Document Version: V1.0
Date: 2023.10.12
Copyright © 2023 Ruijie Networks

Copyright
Copyright © 2023 Ruijie Networks
All rights are reserved in this document and this statement.
Without the prior written consent of Ruijie Networks, any organization or individual shall not reproduce, extract,
back up, modify, or propagate the content of this document in any manner or in any form, or translate it into other
languages or use some or all parts of the document for commercial purposes.
, and other Ruijie networks logos are trademarks of Ruijie Networks.
All other trademarks or registered trademarks mentioned in this document are owned by their respective owners.
Disclaimer
The products, services, or features you purchase are subject to commercial contracts and terms, and some or
all of the products, services, or features described in this document may not be available for you to purchase or
use. Except for the agreement in the contract, Ruijie Networks makes no explicit or implicit statements or
warranties with respect to the content of this document.
The content of this document will be updated from time to time due to product version upgrades or other reasons,
Ruijie Networks reserves the right to modify the content of the document without any notice or prompt.
This manual is designed merely as a user guide. Ruijie Networks has tried its best to ensure the accuracy and
reliability of the content when compiling this manual, but it does not guarantee that the content of the manual is
completely free of errors or omissions, and all the information in this manual does not constitute any explicit or
implicit warranties.

I
Preface
Intended Audience
This document is intended for:
Network engineers
Technical support and servicing engineers
Network administrators
Technical Support
The official website of Ruijie Reyee: https://www.ruijienetworks.com/products/reyee
Technical Support Website: https://www.ruijienetworks.com/support
Case Portal: https://caseportal.ruijienetworks.com
Community: https://community.ruijienetworks.com
Technical Support Email: [email protected]
Conventions
1. Signs
This document also uses signs to indicate some important points during the operation. The meanings of these
signs are as follows:
Danger
An alert that calls attention to safety operation instructions that if not understood or followed when operating
the device can result in physical injury.
Warning
An alert that calls attention to important rules and information that if not understood or followed can result in
data loss or equipment damage.
Caution
An alert that calls attention to essential information that if not understood or followed can result in function
failure or performance degradation.
Note
An alert that contains additional or supplementary information that if not understood or followed will not lead to
serious consequences.
Specification
An alert that contains a description of product or version support.

II
2. Note
This manual provides the device installation steps, hardware troubleshooting, module technical specifications,
and specifications and usage guidelines for cables and connectors. It is intended for the users who have some
experience in installing and maintaining network hardware. At the same time, it is assumed that the users are
already familiar with the related terms and concepts.

i
Contents
Preface.................................................................................................................................................. I
1 Product Overview.............................................................................................................................. 1
1.1 Overview....................................................................................................................................1
1.2 Package Contents......................................................................................................................1
1.3 RG-NIS3100-8GT4SFP-HP.......................................................................................................2
1.3.1 Technical Specifications.................................................................................................2
1.3.2 Appearance....................................................................................................................4
1.4 RG-NIS3100-8GT2SFP-HP.......................................................................................................8
1.4.1 Technical Specifications.................................................................................................8
1.4.2 Appearance..................................................................................................................10
1.5 RG-NIS3100-4GT2SFP-HP.....................................................................................................14
1.5.1 Technical Specifications...............................................................................................14
1.5.2 Appearance..................................................................................................................16
1.6 Power Modules........................................................................................................................22
1.6.1 RG-NIS-PA240-48 .......................................................................................................22
1.6.2 RG-NIS-PA120-48 .......................................................................................................24
2 Preparing for Installation................................................................................................................. 27
2.1.1 Safety Precautions.......................................................................................................27
2.2 Installation Environment Requirements...................................................................................27
2.2.1 Anti-interference Requirements...................................................................................27
2.2.2 Grounding Requirements.............................................................................................27
2.2.3 Lightning Protection Requirements .............................................................................28
2.2.4 EMI Requirements.......................................................................................................29

ii
2.3 Installation Tools......................................................................................................................29
3 Installing the Switch ........................................................................................................................ 30
3.1 Installation Flowchart...............................................................................................................30
3.2 Checking Before Installation....................................................................................................30
3.3 Installing the RG-NIS3100.......................................................................................................30
3.3.1 Mounting the Switch on a DIN Rail..............................................................................31
3.3.2 Mounting the Switch on a Wall ....................................................................................32
3.4 Grounding the Switch ..............................................................................................................33
3.5 Installing the Power Module.....................................................................................................33
3.6 Connecting the Cables ............................................................................................................34
3.7 Bundling the Cables.................................................................................................................35
3.8 Verifying Installation.................................................................................................................35
Appendix A Mini-GBIC Modules......................................................................................................... 36

R-NIS3100 Switch GHardware Installation and Reference Guide Product Overview
1
1 Product Overview
1.1 Overview
The RG-NIS3100 series Layer 2 industrial switch applies next-generation high-performance hardware with
distinctive industrial design. It features industrial-grade operating temperature range and professional outdoor
lightning protection capabilities, and complies with enterprise-class dustproof and anticorrosion standards,
adapting to harsh and complex outdoor environments. In addition, with Ruijie's exclusive Self-Organizing
Network (SON) technology and the unified management platform Ruijie Cloud, the switch enables easy
management and O&M.
Model
10/100/1000BASE-T
Ethernet Port with
Auto-Negotiation
1000BASE-X
SFP Port
Console
Port
10GE
SFP+
Port
Power
Supply
RG-NIS3100-
8GT4SFP-HP
8
4
N/A
N/A
1+1
redundancy
RG-NIS3100-
8GT2SFP-HP
8
2
N/A
N/A
1+1
redundancy
RG-NIS3100-
4GT2SFP-HP
4
2
N/A
N/A
1+1
redundancy
Note
1000BASE-T ports are downward compatible with 100BASE-T and 10BASE-T.
1.2 Package Contents
Item
Quantity
Remarks
RG-NIS3100 Series Switch
1
Mounting Bracket
2
Installation Guide
1
Warranty Card
1
M3 x 8 mm Cross Recessed Countersunk
Head Screw
4
Management Software
1
Pre-installed on
the device

R-NIS3100 Switch GHardware Installation and Reference Guide Product Overview
2
Note
The package contents above are intended to provide a general overview, and are subject to the terms of the
order contract. Check your goods carefully against the order contract. If you have any questions, please
contact the distributor.
1.3 RG-NIS3100-8GT4SFP-HP
1.3.1 Technical Specifications
Model
RG-NIS3100-8GT4SFP-HP
CPU
Built-in MAC chip, 500 MHz single-core processor
BootROM
N/A
Flash Memory
16 MB
SDRAM
DDR3 256 MB
Optical Module
See Appendix B. Direct Attach Copper (DAC) cables are not supported.
Note
The supported module types may update without prior notice. Please
contact Ruijie Networks for details.
SFP Port
The SFP port supports 1000BASE-X and 100BASE-FX.
Power Supply
DC input:
Rated voltage range: 12 V to 56 V
Rated current: 7 A
Ground-Leakage
Current
≤ 3.5 mA
EEE
Supported
PoE
All RJ45 ports are PoE capable and each port provides up to 30 W of PoE power.
Maximum overall PoE/PoE+ output power: 240 W
The PoE port is PoE/PoE+ capable.
The maximum number of PoE devices supported by the switch is determined by
the input voltage and PoE output power of the switch as well as the actual power of
the PoE devices.
PoE Power Cable
Pairs
Mode A (1-2 and 3-6 pairs)

R-NIS3100 Switch GHardware Installation and Reference Guide Product Overview
3
Max. Power
Consumption
Without PoE load: 20 W
With full PoE load:
60 W (input voltage: 12 V to 20 V)
120 W (input voltage: 21 V to 45 V)
240 W (input voltage: 46 V to 56 V)
Operating
Temperature
–40ºC to +75ºC (–40°F to +167°F; non-condensing)
Storage
Temperature
–40ºC to +75ºC (–40°F to +167°F)
Operating
Humidity
5% RH to 95% RH
Storage Humidity
5% RH to 95% RH
Fan
Fanless
Temperature
Alarm
Not supported
Safety
Regulations
Compliance
IEC 62368-1
EMC Standards
Compliance
IEC/EN 61000-4-2
IEC/EN 61000-4-3
IEC/EN 61000-4-4
IEC/EN 61000-4-5
IEC/EN 61000-4-6
IEC/EN 61000-4-8
Dimensions (W ×
D ×H)
85 mm x 132 mm x 165 mm (3.35 in. x 5.20 in. x 6.50 in.)
Weight
1.47 kg (3.24 lbs.)
Caution
In a domestic environment, this product may cause radio interference in which case the user may be required
to take adequate measures.
Danger
This device is not suitable for use in locations where children are likely to be present.

R-NIS3100 Switch GHardware Installation and Reference Guide Product Overview
4
1.3.2 Appearance
The RG-NIS3100-8GT4SFP-HP full GE switch provides eight 10/100/1000BASE-T RJ45 ports with auto-
negotiation and four SFP ports on the front panel, and DC power connectors on the top panel. The following
figures show the product appearance.
Figure 1-1 RG-NIS3100-8GT4SFP-HP
1. Front Panel
Figure 1-2 Front Panel of RG-NIS3100-8GT4SFP-HP
1. Power status LED P1
2. Power status LED P2
3. System status LED
4. Reset button
5. 10/100/1000BASE-T Ethernet ports with
auto-negotiation
6. GE SFP ports

R-NIS3100 Switch GHardware Installation and Reference Guide Product Overview
5
Reset button: Press and hold the button for less than 2 seconds to restart the system. Press and hold the
button for over 5 seconds until the system status LED starts blinking to restore factory settings and restart
the system.
2. LEDs
LED
Silkscreen
Label
Status
Description
System status
LED
SYS
Off
The switch is not powered on.
Fast blinking green (8–10
Hz)
The switch is starting up.
Solid green
The switch is running properly.
Slow blinking green (0.5
Hz)
The switch is not connected to the
cloud.
Blinking green (2 Hz)
The switch is restoring factory settings
and will be powered off or is being
upgraded.
Blinking green at different
time points (cycle: 1s on
and 1s off, 0.25s on and
0.25s off, 0.25s on and
0.25s off, 0.25s on and
1.75s off)
The main program is lost or damaged,
or specific functions are abnormal.
Electrical port
and optical
port LEDs
LINK/ACT
Off
The port is Down.
Solid green
The port is Up.
Blinking green
The port is Up and is receiving or
sending data.
PoE/PoE+
Off
PoE power supply is off.
Solid yellow
PoE power supply is on.
Power status
LEDs
P1
Off
PWR1 power supply is off.
Solid on
PWR1 power supply is on.
P2
Off
PWR2 power supply is off.
Solid on
PWR2 power supply is on.

R-NIS3100 Switch GHardware Installation and Reference Guide Product Overview
6
3. Top Panel
Figure 1-3 Top Panel of NIS3100-8GT4SFP-HP
1. Grounding stud
3. Alarm port
2. DC power connector PWR2
4. DC power connector PWR1
4. Rear Panel
The switch supports two installation modes: DIN rail mounting and wall mounting.
Figure 1-4 Rear Panel for DIN Rail Mounting

R-NIS3100 Switch GHardware Installation and Reference Guide Product Overview
7
Figure 1-5 Rear Panel for Wall Mounting
1. DIN rail clamp
2. Mounting holes
5. Bottom Panel
Figure 1-6 Bottom Panel of NIS3100-8GT4SFP-HP
1. Nameplate

R-NIS3100 Switch GHardware Installation and Reference Guide Product Overview
8
6. Cooling
The RG-NIS3100-8GT4SFP-HP adopts natural cooling to ensure that it works properly in a specified
environment. Maintain a minimum clearance of 100 mm (3.94 in.) around the device to ensure proper ventilation.
1.4 RG-NIS3100-8GT2SFP-HP
1.4.1 Technical Specifications
Model
RG-NIS3100-8GT2SFP-HP
CPU
Built-in MAC chip, 500 MHz single-core processor
BootROM
N/A
Flash Memory
16 MB
SDRAM
DDR3 256 MB
Optical Module
See Appendix B. DAC cables are not supported.
The supported module types may update without prior notice. Please contact Ruijie
Networks for details.
SFP Port
The SFP port supports 1000BASE-X and 100BASE-FX.
Power Supply
DC input:
Rated voltage range: 12 V to 56 V
Rated current: 7 A
Ground-Leakage
Current
≤ 3.5 mA
EEE
Supported
PoE
All RJ45 ports are PoE capable and each port provides up to 30 W of PoE power.
Maximum overall PoE/PoE+ output power: 240 W
The PoE port is PoE/PoE+ capable.
The maximum number of PoE devices supported by the switch is determined by
the input voltage and PoE output power of the switch as well as the actual power of
the PoE devices.
PoE Power Cable
Pairs
Mode A (1-2 and 3-6 pairs)

R-NIS3100 Switch GHardware Installation and Reference Guide Product Overview
9
Max. Power
Consumption
Without PoE load: 20 W
With full PoE load:
60 W (input voltage: 12 V to 20 V)
120 W (input voltage: 21 V to 45 V)
240 W (input voltage: 46 V to 56 V)
Operating
Temperature
–40ºC to +75ºC (–40°F to +167°F; non-condensing)
Storage
Temperature
–40ºC to +75ºC (–40°F to +167°F)
Operating
Humidity
5% RH to 95% RH
Storage Humidity
5% RH to 95% RH
Fan
Fanless
Temperature
Alarm
Not supported
Safety
Regulations
Compliance
IEC 62368-1
EMC Standards
Compliance
IEC/EN 61000-4-2
IEC/EN 61000-4-3
IEC/EN 61000-4-4
IEC/EN 61000-4-5
IEC/EN 61000-4-6
IEC/EN 61000-4-8
Dimensions (W ×
D ×H)
85 mm x 132 mm x 165 mm (3.35 in. x 5.20 in. x 6.50 in.)
Weight
1.42 kg (3.13 lbs.)
Caution
In a domestic environment, this product may cause radio interference in which case the user may be required
to take adequate measures.
Danger
This device is not suitable for use in locations where children are likely to be present.

R-NIS3100 Switch GHardware Installation and Reference Guide Product Overview
10
1.4.2 Appearance
The RG-NIS3100-8GT2SFP-HP full GE switch provides eight 10/100/1000BASE-T RJ45 ports with auto-
negotiation and two SFP ports on the front panel, and DC power connectors on the top panel. The following
figures show the product appearance.
Figure 1-7 RG-NIS3100-8GT2SFP-HP
1. Front Panel
Figure 1-8 Front Panel of RG-NIS3100-8GT2SFP-HP

R-NIS3100 Switch GHardware Installation and Reference Guide Product Overview
11
1. Power status LED P1
2. Power status LED P2
3. System status LED
4. Reset button
5. 10/100/1000BASE-T Ethernet ports with
auto-negotiation
6. GE SFP ports
Reset button: Press and hold the button for less than 2 seconds to restart the system. Press and hold the
button for over 5 seconds until the system status LED starts blinking to restore factory settings and restart
the system.
2. LEDs
LED
Silkscreen
Label
Status
Description
System status
LED
SYS
Off
The switch is not powered on.
Fast blinking green (8–10
Hz)
The switch is starting up.
Solid green
The switch is running properly.
Slow blinking green (0.5
Hz)
The switch is not connected to the
cloud.
Blinking green (2 Hz)
The switch is restoring factory settings
and will be powered off or is being
upgraded.
Blinking green at different
time points (cycle: 1s on
and 1s off, 0.25s on and
0.25s off, 0.25s on and
0.25s off, 0.25s on and
1.75s off)
The main program is lost or damaged,
or specific functions are abnormal.
Electrical port
and optical
port LEDs
LINK/ACT
Off
The port is Down.
Solid green
The port is Up.
Blinking green
The port is Up and is receiving or
sending data.
PoE/PoE+
Off
PoE power supply is off.
Solid yellow
PoE power supply is on.
Power status
LEDs
P1
Off
PWR1 power supply is off.
Solid on
PWR1 power supply is on.

R-NIS3100 Switch GHardware Installation and Reference Guide Product Overview
12
LED
Silkscreen
Label
Status
Description
P2
Off
PWR2 power supply is off.
Solid on
PWR2 power supply is on.
3. Top Panel
Figure 1-9 Top Panel of RG-NIS3100-8GT2SFP-HP
1. Grounding stud
3. Alarm port
2. DC power connector PWR2
4. DC power connector PWR1
4. Rear Panel
The switch supports two installation modes: DIN rail mounting and wall mounting.

R-NIS3100 Switch GHardware Installation and Reference Guide Product Overview
13
Figure 1-10 Rear Panel for DIN Rail Mounting
Figure 1-11 Rear Panel for Wall Mounting
1. DIN rail clamp
2. Mounting holes

R-NIS3100 Switch GHardware Installation and Reference Guide Product Overview
14
5. Bottom Panel
Figure 1-12 Bottom Panel of NIS3100-8GT2SFP-HP
1. Nameplate
6. Cooling
The RG-NIS3100-8GT2SFP-HP adopts natural cooling to ensure that it works properly in a specified
environment. Maintain a minimum clearance of 100 mm (3.94 in.) around the device to ensure proper ventilation.
1.5 RG-NIS3100-4GT2SFP-HP
1.5.1 Technical Specifications
Model
RG-NIS3100-4GT2SFP-HP
CPU
Built-in MAC chip, 500 MHz single-core processor
BootROM
N/A
Flash Memory
16 MB
SDRAM
DDR3 256 MB
Optical Module
See Appendix B. DAC cables are not supported.
The supported module types may update without prior notice. Please contact Ruijie
Networks for details.
SFP Port
The SFP port supports 1000BASE-X and 100BASE-FX.