Ruijie RG-S6150-X Series Installation and operating manual

Ruijie RG-S6150-X Series Switches
Hardware Installation and Reference Guide
Document Version: V1.01
Date: 2022.6.9
Copyright © 2022 Ruijie Networks

Copyright
Copyright © 2022 Ruijie Networks
All rights are reserved in this document and this statement.
Any reproduction, excerption, backup, modification, transmission, translation or commercial use of this document
or any portion of this document, in any form or by any means, without the prior written consent of Ruijie Networks
is prohibited.
Trademark and are owned by Ruijie Networks.
All other trademarks or registered trademarks mentioned in this document are owned by their respective owners.
Disclaimer
The products, services, or features you purchase are subject to commercial contracts and terms. Some or all of
the products, services or features described in this document may not be within the scope of your purchase or
use. Unless otherwise agreed in the contract, Ruijie Networks does not make any express or implied statement
or guarantee for the content of this document.
Due to product version upgrades or other reasons, the content of this document will be updated from time to
time. Ruijie Networks reserves the right to modify the content of the document without any notice or prompt.
This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy and will not shoulder
any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

I
Preface
Intended Audience
This document is intended for:
Network engineers
Technical support and servicing engineers
Network administrators
Technical Support
Ruijie Networks Website: https://www.ruijienetworks.com/
Technical Support Website: https://ruijienetworks.com/support
Case Portal: https://caseportal.ruijienetworks.com
Community: https://community.ruijienetworks.com
Technical Support Email: s[email protected]
Skype: [email protected]
Conventions
1. Conversions
Convention
Description
Bold font
Commands, command options, and keywords are in bold font.
Italic font
Arguments for which you supply values are in italic font.
[ ]
Elements in square brackets are optional.
{ x | y | z }
Alternative keywords are grouped in braces and separated by
vertical bars.
[ x | y | z ]
Optional alternative keywords are grouped in brackets and
separated by vertical bars.
&<1-n>
The argument before the sign (&) can be input for consecutive 1- n
times.
//
Double slashes at the beginning of a line of code indicate a
comment line.
2. Signs
The signs used in this document are described as follows:

II
Warning
An alert that calls attention to important rules and information that if not understood or followed can result in
data loss or equipment damage.
Caution
An alert that calls attention to essential information that if not understood or followed can result in function
failure or performance degradation.
Note
An alert that contains additional or supplementary information that if not understood or followed will not lead to
serious consequences.
Specification
An alert that contains a description of product or version support.
3. Note
The manual offers configuration information (including model, port type and command line interface) for
indicative purpose only. In case of any discrepancy or inconsistency between the manual and theactual version,
the actual version prevails.

Hardware Installation and Reference Guide Product Overview
3
1 Product Overview
RG-S6150-X series switches are new-generation Layer-3 switches released by Ruijie Networks, providing high
performance, consolidated security and multiple services. The switches are mainly applied to the convergence
layer of campus networks to provide line-rate switching and complete QoS policies, prioritizing some traffic over
others to ensure important data transmission without latency. RG-S6150-48VS8CQ-X switch has up to 48 25G
ports and eight 100G ports per device and RG-S6150-24VS8CQ-X switch has up to 24 25G ports and eight
100G ports per device.
Table 1-1 RG-S6150-X Series Switches
Model
100G
QSFP28
Ethernet
Port
25G/10G
SFP28
Ethernet
Port
10GBase-T
Ethernet
Port
Expansion
Module Slot
Redundant
Fan
Redundant
Power
Supply
RG-S6150-
48VS8CQ-X
8
48
N/A
N/A
3+1
1+1
RG-S6150-
24VS8CQ-X
8
24
N/A
N/A
3+1
1+1
Note
A 25G SFP28 port supports 25G/10Gbase-R and 1000base-X.
A QSFP28 port supports both 100G/40G mode and 4x25G/4x10G mode.
1.1 RG-S6150-48VS8CQ-X
Table 1-2 Technical Specifications
Model
RG-S6150-48VS8CQ-X
CPU
FT2000/4
BOOT ROM
16 MB
FLASH Memory
8 GB
SDRAM
DDR4 4 GB
Expansion Module Slot
Not Support
Expansion Module
Not Support
Fan Slot
4 (support 3+1 redundancy, configure at least 3 fan modules in one switch)

Hardware Installation and Reference Guide Product Overview
4
Fan Module
M1EFAN II-F
Power Supply Slot
2 (support 1+1 redundancy)
Power Supply Module
RG-PA550I II-F
Note
The power supply module is not delivered with the switch. Please purchase the
module separately to ensure normal operation of the device.
Power Supply Input
AC input:
Rated voltage range: 100 V AC to 240
V AC
Maximum voltage range: 90 V AC to
264 V AC
Frequency: 50 Hz/60 Hz
Rated current: 3.5 A to 7.2 A
HVDC input:
Rated voltage: 240 V DC
Maximum voltage range: 192 V DC to 288
V DC
Rated current: 3.6 A
Power Consumption
Less than 300 W
Optical Module
Refer to Appendix 7.2
Note
The supported modules update at any time, contact Ruijie Networks for details.
Temperature Warning
Support temperature warning and over-temperature protection.
EMC Certification
GB/T 9254.1-2021
Safety Regulation
Compliance
GB 4943.1-2011
Working Temperature
0°C to 45°C (32°F to 113°F)
Storage Temperature
–40°C to 70°C (–40°F to 158°F)
Working Humidity
10% to 90% RH (non-condensing)
Weight
Net weight: 10 kg (20.05 lbs., with 4 fan modules and 2 power modules)
Dimensions
(W x D x H)
442 mm x 387 mm x 44 mm (17.40 in. x 15.24 in. x 1.73 in.), 1U
Caution
RG-S6150-48VS8CQ-X is a class A product. In a domestic environment, this product may cause radio
interference in which case the user may be required to take adequate measures.

Hardware Installation and Reference Guide Product Overview
5
Note
The 25G/100G Ethernet port of the RG-S6150-48VS8CQ-X switch does not support direct attach copper
(DAC).
The 48VS port license supports 25G port and does not support FEC-RS.
Product Appearance
The hardware of the RG-S6150-48VS8CQ-X includes the chassis, the power supply system and the heat
dissipation system.
The power supply system: Provides two power supply slots, which support 1+1 power supply redundancy.
You are advised to configure power supply redundancy.
The heat dissipation system: Provides four fan module slots, which support 3+1 fan redundancy. You are
advised to configure all fans redundancy.
Figure 1-1 Appearance of the RG-S6150-48VS8CQ-X
Figure 1-2 Front Panel of the RG-S6150-48VS8CQ-X
1. System Status LED
2. Locator LED
3. SFP28 Port
4. SFP28 Port LED
5. QSFP28 Port
6. QSFP28 Port LED
Note
The RG-S6150-48VS8CQ-X supports 100GE QSFP28 module, 25GE SFP28 module, 10GE SFP+ module
and GE SFP+ module. For specific modules and specifications, refer to Appendix 7.2.
The speed of 48VS port is set to 10 Gbps by default. A license is needed for the port speed of 25 Gbps. The
48VS port does not support FEC-RS.

Hardware Installation and Reference Guide Product Overview
6
Back Panel
Figure 1-3 Back Panel of the RG-S6150-48VS8CQ-X
1. Power Module Slot
2. Fan Module Slot
3. System Status LED
4. Locator LED
5. MGMT Port
6. Console Port
7. USB 2.0 Port
8. Assess Tag
9. Grounding Stud
Asset Tag
The asset tag is at the bottom right corner of the switch back panel. The tag is movable and can be withdrawn
from the device. Users can mark the information such as asset name, category, code and registration date on
the tag which helps to improve asset management accuracy and efficiency.
Figure 1-4 Asset Tag of the RG-S6150-48VS8CQ-X
External Ports
The RG-S6150-48VS8CQ-X provides the following ports:
Universal serial bus (USB) port: This port can connect with USB memory to save logs, host versions,
warnings and other diagnostic messages. Therefore, it is more convenient to upgrade the software version
of the switch on line and save the log information.
Note
To protect the data and avoid device damage, use qualified USB flash disks of good brands. At the same time,
the local USB port is compatible with most of the USB controllers except some USB flash disks.

Hardware Installation and Reference Guide Product Overview
7
The RG-S6150-48VS8CQ-X switch supports debugging, configuration, maintenance, management and host
software uploading of Console ports.
Console port: Use RS-232 interface electrical level and standard RJ45 connector. This interface is
connected with the serial port of terminal PC to perform system debugging, configuration, maintenance,
management, and host software uploading.
MGMT port: This is an out-band Ethernet port, which uses standard RJ45 connector. This interface is
connected with Ethernet port of a PC to perform program downloading. The user can manage and maintain
the switch remotely through this interface. Use a standard Ethernet cable to connect the MGMT port and
the Ethernet port of the PC.
SFP28 port: There are 48 10G SFP28 ports (A license is needed for a 25G SFP28 port.), which support
optical modules.
QSFP28 port: There are 8 100G QSFP28 ports, which support optical modules. These ports can also work
in 4 x 25G mode.
LED
Table 1-3 LED
LED
Panel
Identification
Status
Meaning
System Status LED
(Front panel/Back
panel)
Status
Off
The system is not powered up.
Solid red
1. One of the modules of the system fails.
2. There are less than 3 fans.
3. The internal or partial temperature exceeds the
warning working temperature, and the switching
service resets.
Blinking green
The system is initializing.
Solid green
The system is operational.
Solid yellow
1. The temperature gets to the warning threshold.
2. Only 3 fans are in the position.
3. One of the dual powers is not connected with the
AC power cord.
Locator LED (Front
panel/Back panel)
ID
Off
Locator LED is controlled by CPLD. Locating function
is disabled.
Solid blue
Device locating is enabled and the technical support
engineers turn on or off the locator LED remotely.
MGMT Port LED
MGMT
Off
The port is not connected.
Green
The port is connected at 10/100/1000 Mbps.

Hardware Installation and Reference Guide Product Overview
8
Blinking
The port is transmitting or receiving data.
SFP28 Port LED
1F-48F
Off
The port is not connected.
Solid green
The port is connected at 1/10/25 Gbps.
Blinking green
The port is transmitting or receiving data at 1/10/25
Gbps.
QSFP28 Port LED
49F-56F
Off
The port is not connected.
Solid green
The port is connected at 40/100 Gbps.
Blinking green
The port is transmitting or receiving data at 40/100
Gbps.
Heat Dissipation
The working temperature of the RG-S6150-48VS8CQ-X switch is 0°C to 45°C, or 32°F to 113°F, and the heat
dissipation design needs to ensure the stability, safety and maintainability in such environment. The RG-S6150-
48VS8CQ-X adopts fan ventilation and forced convection to ensure the device can work normally in specified
environment. Dust the device every three months to avoid blocking the ventilation openings.
The RG-S6150-48VS8CQ-X supports M1EFAN II-F, and provides fan speed regulation, fan failure warning, and
fan hot swapping.
Figure 1-5 Airflow Direction of the RG-S6150-48VS8CQ-X
Note
Maintain a minimum clearance of 20 cm (7.87 in.) around the switch for ventilation.
It requires at least three fan modules to work normally. Filler panels need to be installed in the unoccupied fan
module slots to ensure ventilation and heat dissipation and avoid dusts.
Out
In