Ruijie RG-S6100 Series How to use

Ruijie RG-S6100 Series Switches
S6100_RGOS 12.6(2)B1101
Release Notes
Document Version: V1.1
Date: April 10, 2023
Copyright © 2023 Ruijie Networks

Copyright
Copyright © 2023 Ruijie Networks
All rights are reserved in this document and this statement.
Any reproduction, excerption, backup, modification, transmission, translation or commercial use of this document
or any portion of this document, in any form or by any means, without the prior written consent of Ruijie Networks
is prohibited.
Trademark and are owned by Ruijie Networks.
All other trademarks or registered trademarks mentioned in this document are owned by their respective owners.
Disclaimer
The products, services, or features you purchase are subject to commercial contracts and terms. Some or all of
the products, services or features described in this document may not be within the scope of your purchase or
use. Unless otherwise agreed in the contract, Ruijie Networks does not make any express or implied statement
or guarantee for the content of this document.
Due to product version upgrades or other reasons, the content of this document will be updated from time to
time. Ruijie Networks reserves the right to modify the content of the document without any notice or prompt.
This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy and will not shoulder
any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

Release Notes Version Information
I
Preface
Intended Audience
This document is intended for:
Network engineers
Technical support and servicing engineers
Network administrators
Technical Support
Ruijie Networks Website: https://www.ruijienetworks.com/
Technical Support Website: https://ruijienetworks.com/support
Case Portal: https://caseportal.ruijienetworks.com
Community: https://community.ruijienetworks.com
Technical Support Email: [email protected]
Skype: [email protected]
Conventions
1. Conversions
Convention
Description
Bold font
Commands, command options, and keywords are in bold font.
Italic font
Arguments for which you supply values are in italic font.
[ ]
Elements in square brackets are optional.
{ x | y | z }
Alternative keywords are grouped in braces and separated by
vertical bars.
[ x | y | z ]
Optional alternative keywords are grouped in brackets and
separated by vertical bars.
&<1-n>
The argument before the sign (&) can be input for consecutive 1- n
times.
//
Double slashes at the beginning of a line of code indicate a
comment line.
2. Signs
The signs used in this document are described as follows:

Release Notes Version Information
II
Warning
An alert that calls attention to important rules and information that if not understood or followed can result in
data loss or equipment damage.
Caution
An alert that calls attention to essential information that if not understood or followed can result in function
failure or performance degradation.
Note
An alert that contains additional or supplementary information that if not understood or followed will not lead to
serious consequences.
Specification
An alert that contains a description of product or version support.

Release Notes Version Information
1
1 Version Information
Version Number
RGOS12.6(2)B1101
Applicable Products
S6120-24XMG4XS4VS-UP-H
S6120-48XMG4VS2QXS-UP-H
S6110-24MG4VS-UP
S6110-48MG4VS2QXS-UP
Category
Official Release
Customers
Global customers
Release Date
April 10, 2023
Baseline Version
RGOS 12.6(2)B1302
Reason for Release
New arrivals of multi-GE series products are officially released.
Use the show version detail command to check the version number.
Ruijie#show version detail
System description : Ruijie 10G Ethernet Switch(S6120-24XMG4XS4VS-UP-H) By
Ruijie Networks
System start time : 2023-02-10 17:42:22
System uptime : 06:22:37:54
System hardware version : 1.00
System software version : S6100_RGOS 12.6(2)B1101
System patch number : NA
System software number : M20102304042023
System serial number : G1RW31900033B
System boot version : 1.4.27(Master) 1.4.27(Slave)
System rboot version : 1.1.39
System core version : 4.4.178-dirty
Module information:
Slot 1/0 : S6120-24XMG4XS4VS-UP-H
System uptime : 06:22:37:53
Hardware version : 1.00
Boot version : 1.4.27(Master) 1.4.27(Slave)
Rboot version : 1.1.39
Software version : S6100_RGOS 12.6(2)B1101
Software number : M20102304042023
Serial number : G1RW31900033B
Slot 2/0 : S6120-48XMG4VS2QXS-UP-H
System uptime : 06:22:37:54
Hardware version : 1.00

Release Notes Version Information
2
Boot version : 1.4.27(Master) 1.4.27(Slave)
Rboot version : 1.1.39

Release Notes Release Record
3
2 Release Record
Note
After the version was released, the upgrade file may be released (identified by ID) because bugs were found
and resolved.
Release Date
Upgrade File
Description
February 17, 2023
S6100_RGOS12.6(2)B1101_10141008_install.bin
Pilot release for new RG-
S6100 series multi-GE
switches
April 10, 2023
S6100_RGOS12.6(2)B1101_install.bin
Official release for new
RG-S6100 series multi-GE
switches

Release Notes Hardware Support
3
3 Hardware Support
Note
The hardware version number is rounded to the first decimal place. The numeral in the second decimal place
does not affect software version support.
Hardware Type
Hardware Model
Version Number
Chassis
S6120-24XMG4XS4VS-UP-H
1.x
Chassis
S6120-48XMG4VS2QXS-UP-H
1.x
Chassis
S6110-24MG4VS-UP
1.x
Chassis
S6110-48MG4VS2QXS-UP
1.x
Note
For details, see Hardware Installation and Reference Guide.

Release Notes Resolved Issues
5
4 Resolved Issues
Notice
For details about the preceding bugs, see Warning Notice.

Release Notes Remaining Issues
4
5 Remaining Issues
Bug ID
761952
Description
When configuring the VLAN ID range-based selective QINQ, there should be no
more than 8 VLAN IDs in each range. For example, for the C-TAG based QINQ,
the command dot1q outer vid 20 register inner vid 1-8,1-10,12-15 successfully
configures two VLAN ID ranges (range 1-8 and range 12-15), and range 1-10 fails
to be configured.
Workaround
Perform integrated service planning to avoid assigning discrete VLANs to different
services.
Release
RGOS12.5(4)B1102
Bug ID
881776
Description
On Ruijie Cloud, the port rate options of a 25 Gbps port include 1000 Mbps.
However, the actual 25 Gbps port on the switch does not support the 1000
Mbps port rate.
When the port rate of a 25 Gbps port on Ruijie Cloud is configured as
10Gbps/25G Gbps, a succes message will be displayed on the Ruijie Cloud,
but the configruation does not take effect on the switch.
Workaround
Do not configure the port rate of a 25 Gbps port on Ruijie Cloud.
Release
RGOS12.5(4)B1102
Bug ID
873037
Description
The cross-chip bandwidth of S6110-48MG4VS2QXS-UP and S6120-
48XMG4VS2QXS-UP-H is 50 Gbps. That is, the two 25G ports form a 50G
aggregate interface and forward traffic in load balancing mode.
The default mode is enhanced load balancing:
1. Load balancing based on source and destination MAC addresses for Layer 2
packets without IP headers
2. Load balancing based on source and destination IP addresses for Layer 3
packets with IP headers
Packet forwarding through the HG port across chips has the following restrictions:
1. If the packets contain same Layer 2 source and destination MAC addresses or
same Layer 3 source and destination IP addresses, the packets will be forwarded
by one HG port and the maximum forwarding bandwidth is 25 Gbps.