Ruijie RG-IS2712G Installation and operating manual

RG-IS2700G Series Switch
Hardware Installation and Reference Guide V1.12

Copyright Statement
Ruijie Networks©2017
Ruijie Networks reserves all copyrights of this document. Any reproduction, excerption, backup, modification,
transmission, translation or commercial use of this document or any portion of this document, in any form or by any means,
without the prior written consent of Ruijie Networks is prohibited.
Exemption Statement
This document is provided “as is”. The contents of this document are subject to change without any notice. Please obtain
the latest information through the Ruijie Networks website. Ruijie Networks endeavors to ensure content accuracy and will
not shoulder any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

Preface
Thank you for using our products. This manual will guide you through the installation of the device.
This manual describes the functional and physical features and provides the device installation steps, hardware
troubleshooting, module technical specifications, and specifications and usage guidelines for cables and connectors.
Audience
It is intended for the users who have some experience in installing and maintaining network hardware. At the same time, it
is assumed that the users are already familiar with the related terms and concepts.
Obtaining Technical Assistance
Ruijie Networks Website: http://www.ruijienetworks.com/
Service Email: [email protected]
Technical Support: http://www.ruijienetworks.com/service.aspx
Technical Support Hotline: [phone]
Related Documents
Documents
Description
Configuration Guide
Describes network protocols and related mechanisms that supported by the
product, with configuration examples.
Command Reference
Describes the related configuration commands, including command modes,
parameter descriptions, usage guides, and related examples.
Symbol Conventions
Means reader take note. Notes contain helpful suggestions or references.
Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of
data.

RG-IS2700G Series Switch Hardware Installation and Reference Guide
1 Product Overview
The RG-IS2700G series switches are the next generation layer-2 switches launched by Ruijie Networks. Integrated with
high performance, high security and multiple services, the RG-IS2700G series switches are mainly deployed in the
scenario of outdoor weak batter cases or on the wall with the DIN rail mounted to provide full line-rate layer-2 switching
and complete QoS policies, and to ensure the undelayed transmission of key data by applying different traffic
classification rules to different applications. RG-IS2700G is shipped with brackets for wall mounting.
Table 1-1 RG-IS2700G series
Model
10/100/1000Base-T adaptive
Ethernet port
1000Base-X SFP
port
Console port
RG-IS2712G
8
4
1
RG-IS2706G
4
2
1
1.1 RG-IS2712G
Technical Specifications
Table 1-2 Technical specifications of the RG-IS2712G Switches
Model
RG-IS2712G
Module Type
Gigabit Ethernet:
MINI-GBIC-SX-MM850
MINI-GBIC-LX-SM1310
MINI-GBIC-LH40-SM1310
MINI-GBIC-ZX50-SM1550
MINI-GBIC-ZX80-SM1550
MINI-GBIC-ZX100-SM1550
GE-SFP-LX20-SM1310-BIDI
GE-SFP-LX20-SM1550-BIDI
GE-SFP-LH40-SM1310-BIDI
GE-SFP-LH40-SM1550-BIDI
1000Base-T:
Mini-GBIC-GT
SFP module, supporting 2.5Gbps bandwidth and VSU deployment:
GE-SFP-STACK1.6M
The supported module type may change at any time. Contact us for the detailed
change information.
BIDI optic modules must be used in pairs. If GE-SFP-LX20-SM1310-BIDI is used at
one end, then GE-SFP-LX20-SM1550-BIDI must be applied to the other end. Please

RG-IS2700G Series Switch Hardware Installation and Reference Guide
refer to AppendixB for BIDI optic module details.
SFP Port
Supporting 1000Base-X;
Supporting 2.5Gbps bandwidth, and VSU deployment
Power Supply
AC input:
Rated voltage range: 100VAC to 240VAC
Maximum voltage range: 85VAC to 265VAC
Frequency: 50Hz to 60Hz
Rated current: 0.4A
HVDC input:
Rated voltage range: 140VDC to 340VDC
Maximum voltage range: 130VDC to 370VDC
Rated current: 0.4A
Power Consumption
Max.12 W
Operating Temperature
-40ºC to 85ºC
Storage Temperature
-40ºC to 85ºC
Operating Humidity
10% to 90% RH (non condensing)
Storage Humidity
10% to 90% RH (non condensing)
Fan
Fanless
Temperature Warning
Support
IP Rating
IP40
EMI
GB 9254-2008,FCC Part 15, CISPR (EN55022) class A,
EMS
IEC/EN 61000-4-2 ESD
Contact Discharge: 8 kV
Air Discharge: 15 kV
IEC/EN 61000-4-3 RS
80-1,000 MHz 10V/m
1,400-2,000 MHz 3V/m
2,000-2,700 MHz 1V/m
IEC/EN 61000-4-4 EFT
Power cable 2 kV
Data cable 1 kV

RG-IS2700G Series Switch Hardware Installation and Reference Guide
IEC/EN 61000-4-6 CS
15kHz-80 MHz 10V
IEC/EN 61000-4-8 PFMF
50Hz 30A/m
IEC/EN 61000-4-5 Surge
Power cable, L/N 2kV
Power cable, L-PE/N-PE 6kV
Data cable 6kV
IEC/EN 61000-4-11 DIP
AC220V CLASS 3
AC110V CLASS 3
Security Compliance
GB4943-2001
Dimensions (W x D x H)
160 mm x 115 mm x 52 mm
Weight
1 kg
RG-IS2712G switch is a class A product. In a domestic environment, this product may cause radio interference in
which case the user may be required to take adequate measures.
Product Appearance
The front panel of the RG-IS2712G Ethernet switch provides eight 10/100/1000Base-T Ethernet ports, four Gigabit SFP
fiber ports and one Console port. The back panel provides AC power input ports. Figure 1-1 shows the appearance of the
RG-IS2712G.
Figure 1-1 Appearance of the RG-IS2712G

RG-IS2700G Series Switch Hardware Installation and Reference Guide
Front Panel
Figure 1-2 RG-IS2712G Front Panel

RG-IS2700G Series Switch Hardware Installation and Reference Guide
Note
1. Switch status indicator
2. Reset button
3. Console port
4. 10/100/1000Base-T adaptive Ethernet
port indicator
5. 10/100/1000Base-T adaptive Ethernet port
6. 1000Base-X SFP port/2.5 G stack port
7. 1000Base-X SFP port indicator
8. Power interface
Side panel
Figure 1-3 RG-IS2712G Side Panel
Note
1. 6-pin AC power connector
2. Grounding pole
3. Warning Label for high temperature and electric shock
Back panel
Figure 1-4 RG-IS2712G Back Panel

RG-IS2700G Series Switch Hardware Installation and Reference Guide
1
2
3
4
5
6
Note
1. Product information label
2. Device bar code
3. DIN slot
4. Network access license of the device
5. MAC address of the device
6. Tips for software preinstallation
Power Supply
The RG-IS2712G switch adopts the AC power input.
AC input:
Rated voltage range: 100 VAC to 240 VAC
Maximum voltage range: 85 VAC to 265 VAC
Frequency: 50 Hz to 60 Hz

RG-IS2700G Series Switch Hardware Installation and Reference Guide
Rated current: 0.4 A
Power cord specification: 10 A power cord
Heat Dissipation
The RG-IS2712G switch is designed with no fans. To ensure good dissipation, sufficient ventilation space (10 cm distance
from both sides and the back panel of the chassis) should be reserved to avoid the air inlet of the chassis from being
blocked; otherwise, the dissipation might be affected.
LED Indicators
Indicator
Faceplate
Marker
Status
Meaning
Status indicator
Status
Off
The switch is not powered on.
Blinking green
The switch is being initialized. If the blinking
persists, however, it indicates that an
abnormality occurs.
Solid green
The switch is operational.
Solid yellow
It indicates a warning on the switch temperature.
Check the working environment of the switch
immediately.
Solid red
Indicates a fault on the switch. For details, refer
to Section of Troubleshooting Common
Faults.
RJ-45 port indicator
1~8
Off
No link, or port was administratively shut down.
Solid green
Link present.
Blinking green
Activity. The port is receiving or sending data.
SFP port indicator
9F-12F
Off
No link, or port was administratively shut down.
Solid green
Link present.
Blinking green
Activity. The port is receiving or sending data.
1.2 RG-IS2706G
Technical specifications
Table 1-3 Technical specifications of the RG-IS2706G Switches
Model
RG-IS2706G
Module Type
Gigabit Ethernet:
MINI-GBIC-SX-MM850
MINI-GBIC-LX-SM1310
MINI-GBIC-LH40-SM1310
MINI-GBIC-ZX50-SM1550
MINI-GBIC-ZX80-SM1550
MINI-GBIC-ZX100-SM1550

RG-IS2700G Series Switch Hardware Installation and Reference Guide
GE-SFP-LX20-SM1310-BIDI
GE-SFP-LX20-SM1550-BIDI
GE-SFP-LH40-SM1310-BIDI
GE-SFP-LH40-SM1550-BIDI
1000Base-T:
Mini-GBIC-GT
SFP module, supporting 2.5Gbps bandwidth and VSU deployment:
GE-SFP-STACK1.6M
The supported module type may change at any time. Contact us for the detailed
change information.
BIDI optic modules must be used in pairs. If GE-SFP-LX20-SM1310-BIDI is used at
one end, then GE-SFP-LX20-SM1550-BIDI must be applied to the other end. Please
refer to AppendixB for BIDI optic module details.
SFP Port
Supporting 1000Base-X;
Supporting 2.5Gbps bandwidth, and VSU deployment
Power Supply
AC input:
Rated voltage range: 100VAC to 240VAC
Maximum voltage range: 90VAC to 264VAC
Frequency: 50Hz to 60Hz
Rated current: 0.5A
HVDC input:
Rated voltage range: 140VDC to 340VDC
Maximum voltage range: 130VDC to 370VDC
Rated current: 0.4A
Power Consumption
Max. 11.5W
Operating Temperature
-40ºC to 85ºC
Storage Temperature
-40ºC to 85ºC
Operating Humidity
5% to 95% RH (non condensing)
Storage Humidity
5% to 95% RH (non condensing)
Fan
Fanless
Temperature Warning
Supported
IP Rating
IP40
EMI
GB 9254-2008,FCC Part 15, CISPR (EN55022) class A,
EMC
IEC/EN 61000-4-2 ESD
Contact Discharge 8 kV
Air Discharge 15 kV
IEC/EN 61000-4-3 RS
80-1,000 MHz 10V/m
1,400-2,000 MHz 3V/m
2,000-2,700 MHz 1V/m

RG-IS2700G Series Switch Hardware Installation and Reference Guide
IEC/EN 61000-4-4 EFT
Power Cable 2 kV
Data Cable 1 kV
IEC/EN 61000-4-6 CS
15kHz-80 MHz 10V
IEC/EN 61000-4-8 PFMF
50Hz 30A/m
IEC/EN 61000-4-5 Surge
Power cable, L/N 2kV
Power cable, L-PE/N-PE 6kV
Data cable 6kV
IEC/EN 61000-4-11 DIP
AC220V CLASS 3
AC110V CLASS 3
Security Compliance
GB4943-2011
Dimensions (W x D x H)
160 mm x 115 mm x 52 mm
Weight
1kg
RG-IS2706G switch is a class A product. In a domestic environment, this product may cause radio interference in
which case the user may be required to take adequate measures.
Product Appearance
The front panel of the RG-IS2706G Ethernet switch provides four 10/100/1000Base-T Ethernet ports, two Gigabit SFP
fiber ports and one Console port. The back panel provides AC power input ports. Figure 1-4 shows the appearance of the
RG-IS2706G.
Figure 1-5 Appearance of the RG-IS2706G
Front Panel

RG-IS2700G Series Switch Hardware Installation and Reference Guide
Figure 1-6 RG-IS2706G Front Panel
Note
1. Switch status indicator
2. Reset button
3. Console port
4. 10/100/1000Base-T adaptive Ethernet
port indicator
5. 10/100/1000Base-T adaptive Ethernet port
6. 1000Base-X SFP port/2.5 G stack port
7. 1000Base-X SFP port indicator
8. Power interface
Side panel
Figure 1-7 RG-IS2706G Side Panel

RG-IS2700G Series Switch Hardware Installation and Reference Guide
Note
1. 6-pin AC power connector
2. Grounding pole
3. Warning Label for high temperature and electric
shock
Back panel
Figure 1-8 RG-IS2706G Back Panel

RG-IS2700G Series Switch Hardware Installation and Reference Guide
1
2
3
4
5
6
Note
7. Product information label
8. Device bar code
9. DIN slot
10. Network access license of the device
11. MAC address of the device
12. Tips for software preinstallation
Power Supply
The RG-IS2706G adopts the AC power input.
AC input:
Rated voltage range: 100 VAC to 240 VAC
Maximum voltage range: 90VAC to 264VAC
Frequency: 50 Hz to 60 Hz
Rated current: 0.5A
Power cord specification: 10 A power cord

RG-IS2700G Series Switch Hardware Installation and Reference Guide
Heat Dissipation
The RG-IS2706G is designed with no fans. To ensure good dissipation, sufficient ventilation space (10cm distance from
both sides and the back panel of the chassis) should be reserved to avoid the air inlet of the chassis being blocked;
otherwise, the dissipation might be affected.
LED Indicators
Indicator
Faceplate
Marker
Status
Meaning
Status indicator
Status
Off
The switch is not powered on.
Blinking green
The switch is being initialized. If the blinking
persists, however, it indicates that an
abnormality occurs.
Solid green
The switch is operational.
Solid yellow
It indicates a warning on the switch
temperature. Check the working environment of
the switch immediately.
Solid red
Indicates a fault on the switch. For details, refer
to Section of Troubleshooting Common
Faults.
RJ-45 port indicator
1~4
Off
No link, or port was administratively shut down.
Solid green
Link present.
Blinking green
Activity. The port is receiving or sending data.
SFP port indicator
5F, 6F
Off
No link, or port was administratively shut down.
Solid green
Link present.
Blinking green
Activity. The port is receiving or sending data.
1.3 RG-IS2712G-DC
Technical Specifications
Table 1-4 Technical specifications of the RG-IS2712G-DC Switches
Model
RG-IS2712G-DC
Module Type
Gigabit Ethernet:
MINI-GBIC-SX-MM850
MINI-GBIC-LX-SM1310
MINI-GBIC-LH40-SM1310
MINI-GBIC-ZX50-SM1550
MINI-GBIC-ZX80-SM1550
MINI-GBIC-ZX100-SM1550
GE-SFP-LX20-SM1310-BIDI
GE-SFP-LX20-SM1550-BIDI

RG-IS2700G Series Switch Hardware Installation and Reference Guide
GE-SFP-LH40-SM1310-BIDI
GE-SFP-LH40-SM1550-BIDI
1000Base-T:
Mini-GBIC-GT
SFP module, supporting 2.5Gbps bandwidth and VSU deployment:
GE-SFP-STACK1.6M
The supported module type may change at any time. Contact us for the detailed
change information.
BIDI optic modules must be used in pairs. If GE-SFP-LX20-SM1310-BIDI is used at
one end, then GE-SFP-LX20-SM1550-BIDI must be applied to the other end. Please
refer to AppendixB for BIDI optic module details.
SFP Port
Supporting 1000Base-X;
Supporting 2.5Gbps bandwidth, and VSU deployment
Power Supply
DC input:
Rated voltage: 24VDC, 48VDC
Maximum voltage range: 18VDC to 72VDC
Maximum current: 1.0A
Two power supplies are supported for 1+1 power redundancy.
Power Consumption
Max.12 W
Operating Temperature
-40ºC to 85ºC
Storage Temperature
-40ºC to 85ºC
Operating Humidity
10% to 90% RH (non condensing)
Storage Humidity
10% to 90% RH (non condensing)
Fan
Fanless
Temperature Warning
Support
IP Rating
IP40
EMI
GB 9254-2008,FCC Part 15, CISPR (EN55022) class A,
EMS
IEC/EN 61000-4-2 ESD
Contact Discharge: 8 kV
Air Discharge: 15 kV
IEC/EN 61000-4-3 RS
80-1,000 MHz 10V/m
1,400-2,000 MHz 3V/m
2,000-2,700 MHz 1V/m
IEC/EN 61000-4-4 EFT
Power cable 2 kV
Data cable 1 kV
IEC/EN 61000-4-6 CS
15kHz-80 MHz 10V
IEC/EN 61000-4-8 PFMF

RG-IS2700G Series Switch Hardware Installation and Reference Guide
50Hz 30A/m
IEC/EN 61000-4-5 Surge
Power cable, L/N 2kV
Power cable, L-PE/N-PE 6kV
Data cable 6kV
Security Compliance
GB4943-2001
Dimensions (W x D x H)
160 mm x 115 mm x 52 mm
Weight
1 kg
RG-IS2712G-DC switch is a class A product. In a domestic environment, this product may cause radio interference
in which case the user may be required to take adequate measures.
Product Appearance
The front panel of the RG-IS2712G-DC Ethernet switch provides eight 10/100/1000Base-T Ethernet ports, four Gigabit
SFP fiber ports and one Console port. The back panel provides AC power input ports. Figure 1-1 shows the appearance
of the RG-IS2712G-DC.
Figure 1-9 Appearance of the RG-IS2712G-DC
Front Panel
Figure 1-10 RG-IS2712G-DC Front Panel

RG-IS2700G Series Switch Hardware Installation and Reference Guide
Note
1. Switch status indicator
2. Reset button
3. Console port
4. 10/100/1000Base-T adaptive Ethernet
port indicator
5. 10/100/1000Base-T adaptive Ethernet port
6. 1000Base-X SFP port/2.5 G stack port
7. 1000Base-X SFP port indicator
8. Power interface
Side panel
Figure 1-11 RG-IS2712G-DC Side Panel

RG-IS2700G Series Switch Hardware Installation and Reference Guide
1
2
3
Note
1. Six-pin power connector
2. Grounding pole
3. Warning Label for high temperature and electric shock
Back panel
Figure 1-12 RG-IS2712G-DC Back Panel