Ruijie S5750 Series User manual

SecurityIntelligent 10GMulti-layer
Switch S5750 Series
Installation Manual

CopyrightStatement
RuijieNetworksCo., Ltd. 2009
Allrightsreserved.
Without ourwritten permission,thisdocument maynot be excerpted, reproduced,
transmitted, orotherwiseinallorin part byanypartyin anymeans.
are all registeredtrademarksofRuijie
NetworksCo., Ltd.and areprotectedbylaw.
Disclaimer
The information contained in thismanualmaybe modified withoutnotification. Ruijie
Networkshastried itsbestto maintain the accuracyand reliabilityofthismanualon the
website.Ruijie Networkstakesno responsibilityforthe miss, inaccuracyorerrorand the
resulting damage and loss in thismanual.

Document ReleaseInformation
Intendedtargets
Releaseformat Electronicdocumentation
RevisionRecord
Date
Original
Version
No.
Revision
Version
No.
Software
Version
No.
Description Author
2009-03 1.3 1.31 10.34 Deleted the
S5750-48GT/4SFP-A
description and modified the
producttechnical
specifications.
LiLingpeng
2009-03-23 1.31 1.31 Modified thedimensionsof
the S5750seriescabinets,
that is,producttechnical
specifications.
LiLingpeng
2009-04-08 1.31 1.32 10.34 Added the
S5750P-48GT/4SFPV2.0
and modified the
S5750-24SFPtothe
S5750-24SFP/12GT.
Pang
Dengyuan
2009-11-13 1.32 1.33 Added the content offixed
rackinstallationand
replaced the figurewith
rendering
LiLiqing

Preface
Thankyou forusing ourswitches.Thismanualprovidesyouwith detailedoperationguide
that allowsyou to easilyinstalland use the switches.
Scope
Thismanualdescribesthefunctionsand physicalfeaturesof the switches,and providesthe
installationprocedures,troubleshooting procedures,technicalspecifications,and
specificationsand userulesofcablesand connectors.It isintended forthe usersthat have
someexperienceininstallingandmaintainingnetworkhardwareandwanttolearnthe
aboveinformation. Atthe sametime, itisassumed that theusers ofthisswitcharealready
familiarwith the related termsand conceptsofEthernet.
DocumentStructure
nChapter1 “ProductOverview”describesthescopeofapplication, mainfeatures,
technicalspecifications, and related extension modulesofthe product.
nChapter2 “Preparation Before Installation”liststhesafety,powersupply,andsite
requirementsthat must be met before the switch can be installed.
nChapter3 “ProductInstallation”describeshowtoinstallthe switch asawholeand its
variousmodules,andto connectthepowersupplyand thegrounding cablesand
configuration port cables.
nChapter4 “Troubleshooting”describeshowtotroubleshoot thefaultsthatmayoccur
duringyourinstallation and use ofthe hardware.
nAppendixA “Connectorsand Connection Media”.
RelatedDocuments
SoftwareManual——coveringCLIcommands,softwareconfigurationguide,and version
releasenotes.
Obtaining Documentation
You can obtainthe documentation you need through the following channels:
Internet:
You can obtainthe latest on-line documentation at:
http://www.ruijie.com.cn

Documentation CD-ROM:
The documentation ofRuijieNetworksswitchesisstored intheCD-ROMpackage, whichis
providedto you togetherwiththe product youpurchase.The CD-ROMisupdated frequently,
and maybemore current than the printed documents.
Obtaining TechnicalAssistance
RuijieNetworksprovidesexcellenttechnicalsupportservicesforall ourproducts.You can
obtain the technicalassistanceyou needthrough anyofthe following channels:
nWebsite ofRuijieNetworks.OnRuijieNetworksWebsite, you canobtainthe latest
technicalinformation, reasonsofcommon faults,problemanalysis,productapplication
solution andsoftwareupgrading information.
nCustomerservicecenterofRuijieNetworks,whichcan provideallcustomerswith
needed technicalassistancefor:Products,technologiesand solutions.The customer
servicecenterprovidesresponsivetechnicalsupportforyourproductinstallation
problems, software configurationproblems, and othernetworkperformance problems.
nCustomerserviceshotline: 4008-111-000
nCustomerserviceswebsite: http://support.ruijie.com.cn
nCustomerservicesemail: [e-mail]
Documentation Conventions
The symbolsused inthisdocument are described asbelow:
Caution
Thissymbolbringsyourattentionto somehelpfulsuggestionsandreferences
Warning
Thissymbolmeansthat you must be extremelycarefulnot to do some things
that maydamage the equipment orcause dataloss.

1
Contents
1Product Overview................................................................................................................................1-1
1.1 Product Overview......................................................................................................................1-1
1.2 TechnicalFeaturesofRG-S5750..............................................................................................1-2
1.2.1 Product Features..........................................................................................................1-2
1.2.2 TechnicalSpecifications................................................................................................1-4
1.3 ProductAppearance................................................................................................................1-12
1.4 RG-S5750 10GExpansionModule.........................................................................................1-17
1.5 S5750PPOEFunction............................................................................................................1-18
2Installation............................................................................................................................................2-1
2.1 PriorPreparation .......................................................................................................................2-1
2.2 Desktop Mounting .....................................................................................................................2-1
2.3 RackMounting...........................................................................................................................2-2
2.4 SystemConnection...................................................................................................................2-3
2.4.1 Connecting the RJ-45 Port...........................................................................................2-3
2.4.2 Connecting OpticalFibers............................................................................................2-4
2.4.3 LaserSafety..................................................................................................................2-4
2.5 Connecting PowerCablesto theSwitch...................................................................................2-4
2.6 OptionalInstallationProcedure.................................................................................................2-5
3Troubleshooting...................................................................................................................................3-1
3.1 Common Troubleshooting Procedures......................................................................................3-1
AConnectors andConnection Media.................................................................................................... A-1
A.1 1000BASE-T/100BASE-TX/10BASE-TPort.............................................................................A-1
A.2 OpticalFiberConnection...........................................................................................................A-2

HardwareManualChapter1ProductOverview
1-1
Product Overview
1.1 Product Overview
The RG-S5750seriesisanewgeneration of10Gmulti-layerchassisswitchdeveloped by
RuijieNetworksthat featureshighperformance, high-security,intelligenceandeaseofuse.
The S5750 switchprovidesflexible media interfaces, whichaccommodate variousmedia for
connection innetworking. In addition, thisseriescan beflexiblyexpanded with various10G
modulesto offerhigh expandabilityandmeet the needsforlarge bandwidth. Thehardware
ofthisseriessupportsmulti-layerwire-speedswitchingandprovidesafull range ofperfect
routingprotocolstomeet therequirement formulti-routingandhighperformanceof
large-scale networks.
The S5750providestheintelligent serviceflowclassificationfromlayer2to layer7, perfect
QoSand multicastapplication management feature.Whileprovidinghigh performanceand
intelligence, thisseriesfeaturesexcellent internalsafetyprotection and usermanagement,
whicheffectivelypreventand controlvirusspreadingand networkattacks,prevent illegal
users from accessing thenetwork,andensurethatlegalusers canreasonablyusenetwork
resources.Thisguaranteesthe safeand reasonableuseand operation ofthenetwork.
Additionally,thisseriesallowdiversified safecontrolpoliciestobe implemented accordingto
the actualnetworkenvironments.
The S5750switchesprovidelargenetworkconvergenceand medium-sized networkcores
with multi-layerswitching, perfectend-to-endQoS,flexibleandrichsecuritysettingsand
policy-based NM, at ahigh performance-price-ratio,bestmeeting the requirementsof
enterprise networksforhigh speed, security, and intelligence.
Currently,S5750 seriescovers seven modelssoasto meet kindsofapplication ofusers:
nS5750-24GT/12SFP:2410/100/1000MadaptiveRJ45 ports,multiplexing12 1000M
SFPports. Twobackextended 10Gports.
nS5750S-24GT/12SFP:Simplified typeofS5750-24GT/12SFP
nS5750P-24GT/12SFP:ExtensionmoduleonthebasisofS5750-24GT/12SFPto
supportPOE, complyingwith 802.3af
nS5750-24SFP/12GT:24 1000M SFPports,multiplexing 12 10/100/1000M adaptive
RJ45 ports. Two backextended10Gports.
nS5750-48GT/4SFP:48 10/100/1000M adaptiveRJ45 ports,multiplexing 41000MSFP
ports. Twobackextended 10Gports.

Chapter1ProductOverviewHardwareManual
1-2
nS5750S-48GT/4SFP:Simplified type ofS5750-48GT/4SFP.
nS5750P-48GT/4SFP:SupporttheextensionmodelofPoweroverEthernet (POE)
based on the S5750-48GT/4SFPand in compliance with 802.3af
Applications:
nConvergence layers oflarge networksorthe backbonesofmedium-sized networks;
nUpgradetothe 10Guplinkbackbone networkbysimplyadding10Gmodulesfor
protecting userinvestment;
nScenarioswhere numerous1000M portsare needed toprovide high-performancedata
processing;
nHigh-performance multi-layerswitching solutions;
nRichsecuritymanagement mechanismto offernetworksecurityprotection,
high-securityaccess controland effectivenetworkaccess control;
nPerfectuseofmanagement policiestohelpthemanagement ofbandwidthandensure
the applicationofkeyservicessuch asvoice, multicast audio/video service and VOD
1.2 TechnicalFeaturesofRG-S5750
1.2.1 Product Features
High-performance multilayer switching
nHighbackbone bandwidth providesnon-blocking feature to all ports;
nAbundant andperfectrouting capabilityaswell assuper-largerouting tablecan satisfy
dynamicrouting oflarge-scalenetworks.
nThe routing forwardingbased onLPMhardwaremakesRG-S5750 Seriesnot onlyfitfor
large-scalenetworks,but alsopreventtheattackofnetworkvirus.Itcanensurethe
wire-speed forwarding oftelegramsand the securityofequipments.
nThe S5750 seriescan supportmulti-layerwire-speed switchinginhardware; can
identifythe applicationdata flowfromlayers 2to 7. Allportshavethe abilitytofilterthe
packet independently,todistinguishdifferent application flows,to manage and control
accordingto different flows.
Flexibleand perfectsecuritycontrol
nIt hasmanyinternalmechanismsto efficientlyprotectandcontrolthespreadofvirus
andattacksofhackers,likethepreventionofDosattack,IPspanning,thusreturna
peace space to network;
nFlexiblebindinginhardwarebetween the portsand theMACaddress/IPaddress may
strictlylimit theuseraccesseson the ports.
nIsolating the information exchange between users bysettingportsasprotected ports,
without needing tooccupythe VLAN resources.

HardwareManualChapter1ProductOverview
1-3
nSource-IP-address-control-based Telnet andWeb equipment access controlreinforces
the securityofthe networkmanagement and stopsthe maliciousattackand
manipulation ofequipment byhackers.
nBroadcaststormsuppression based on portrate percentage andrate PPS toensure
networksecurity;
nIn ordertoensurethesecurityofdevices,preventhackers’attackand controldevices,
SSH(SecureShell)and SNMPv3canencrypt management information inthe process
ofTelnet andSNMP;
nIt can controlthe access ofunauthorized users andprotectthereasonableusage of
legalusers,likeportsecurity,portisolation, expertlevelACL, timeACL, bandwidth
limitation ofspeed based on data flow,thebindingofsixelementsand soon, so satisfy
the needsofstrengthening access controlinenterprisenetworksand campus
networks.
Richmulticastfeatures
nIt supportsdynamicunicast/multicastroutingprotocols,can adaptdifferent scalesof
networksand theenvironment whereneed manymulticastservices,sorealizing the
extension ofnetworkand multi-serviceapplication;
nThe supportofIGMPand sourceIPchecking functioncan effectivelyprevent illegal
multicast source and improve the networksecurity.
nSupportIGMPv1/v2/v3all versions,adapt to different multi-castenvironment, and
satisfythe necessityofmulti-cast securityapplication.
PerfectQoSStrategy
nWith DiffServstandardasthe core, QoSsafeguardsystemsupportsperfectstrategies
suchas802.1P,IPTOS,streamfilterfrom2to 7layer,SP,WRR, etc., sorealizingQoS
logicbased onthemulti-serviceofwhole networksystem;
nProviding multi-layerflow classification and flow controlcoveringMACflow,IPflow, and
applicationflow,implementingmultipleflowpoliciesincluding bandwidth control,
forwarding priority,trafficmanagement, and trafficshaping,andprovidingtrafficrate
limiting,atthegranularityof64 Kbpsfor1000 Mportsand1Mbpsfor10Gports,
accordingto variousapplicationsand theirneeded QoS
High reliability
nIt supportsSPT802.1d,802.1w,802.1s,fullyensurefastconvergence,enhancefault
tolerancecapabilityandguaranteethestableoperationofnetworkaswellas
reasonableuse ofnetworkpipeline.
nIt supportsVRRPVirtualrouting redundancyprotocol,and effectivelyensurenetwork
stability.
nThe S5750andS5750Ssupportour12Voptionalredundancypowersystem
(STAR-RPS),whichprovidesthe switcheswith excellent powerredundancyforhigher
fault tolerance and normalrunning time.

Chapter1ProductOverviewHardwareManual
1-4
nThe S5750P-48GT/4SFPsupportsRuijie53.5Voptionalredundancypowersystems
RPS500-AorRPS1100-A,whichprovidetheswitchwithexcellentpowerredundancy
forhigherfault tolerance and normalrunningtime.
Easyto use and manage
nThe multiplexing multi-gigabit interfacecan flexiblymeet theconnectiontomanygigabit
copperand manygigabitfiberlinks.Thisallowsusersto flexiblychooseand achieve
the networkextension;
nSupportingsmooth upgrade tothe10Gbackbonebysimplyaddingvarious10G
modulesto meet flexible expansion and high bandwidth transmission needs;
nSNTPcan ensuretheexact timing of switchandcan keep thesamewith timeserver.It
isconvenientto managethe analysisand diagnosisofjournaldata and flowdata;
nSyslog canrealizetheunified collection, maintenance, analysis,errorpositionand
backup ofvariouslog info. It iseasyfornetworkadministratorto maintainand manage;
nSynchronousmonitoringofmultipleportsmakesitpossibletomonitorthedata flows
(incoming frames,outgoingframesorboth)on multipleportsjustthrough one ofthem,
greatlyincreasing the maintenanceefficiency.
nCLI interfaceforusebyadvancedusers toconfigure; providingmultipleuploadand
upgrade methodssuch asXmodem, FTP, and TFTP;
nJava-based Web Management allowsusers to makethe visualinterfacemanagement
and configure switchesquicklyand efficiently.
1.2.2 TechnicalSpecifications
Table1-1 Technicalspecificationsofthe S5750 -1
Productmodel
M5750-24GT/12SFP
M5750S-24GT/12SFP
M5750P-24GT/12SFP
Fixedport 24 10/100/1000MRJ45portand12multiplexingSFPinterfaces,2
10Gextensionslot
Availablemodule
Mini-GBIC-SX:single-port1000BASE-SXminiGBICconversion
module (LC interface);
Mini-GBIC-LX:single-port1000BASE-LXminiGBICconversion
module (LC interface):
Mini-GBIC-ZX50: single-port1000BASE-ZXminiGBICconversion
module (LC connector), 50km;
Mini-GBIC-ZX80: singleport1000BASE-ZXminGBIC conversion
module (LC interface), 80km
M5700-01XENPAK:1-portXENPAKinterface10Gconversion
board

HardwareManualChapter1ProductOverview
1-5
M5700--01XFP:1-port XFPinterface 10Gconversion board
M5700-STACK:Singleport10Gstackmodule.
10Gfiberinterfacemodule(300M),appliedtogetherwith the
M5700-01XENPAKconversion board
10 Gfiberinterfacemodule(10KM),appliedtogetherwiththe
M5700-01XENPAKconversion board.
10GfiberERinterfacemodule(40km),appliedtogetherwiththe
M5700-01XENPAKconversion board.
10 GfiberSRinterfacemodule(300m),appliedtogetherwith
M5700-01XFPconversionboard
10GfiberLR interfacemodule(10 Km),appliedtogetherwiththe
M5700-01XFPconversionboards
10GfiberERinterfacemodule(40 Km),applied togetherwith the
M5700-01XFPconversionboard
Packetforwarding
rate
L2: wire speed (66 Mpps)
L3: wire speed (66 Mpps)
802.3afPOE
standard OnlyforS5750P
802.1qVLAN 4 K
ACL
StandardIPACL(IPaddress based hardwareACL)
Extended IPACL(IPaddress based and TCP/UDPportnumber
based hardware ACL)
MACextendedACL(sourceMACaddress based, destinationMAC
address based and optionalEthernet typebased hardware ACL)
Time-based ACL
ExpertlevelACL (hardwareACL basedon the flexible combinations
ofVLANnumber,Ethernet type, MACaddress,IPaddress,
TCP/UDPport number, protocoltype, and time)
L2Protocol
IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3x, IEEE802.3ae,
IEEE802.3ak, IEEE802.3ad, IEEE802.1p, IEEE802.1x,
IEEE802.3ab, IEEE802.1Q(GVRP), IEEEE802.1d, IEEE802.1w,
IEEE802.1s,IGMPSnooping v1/v2/v3,LLDP
DefeatDoSAttack
Supported
DefeatIPScan Supported
L3Protocol OSPF,ECMP/WCMP,RIPv1/v2, PIM (DM/SM/SSM),DVMRP,
VRRP, IGMPv1/v2/v
Management
protocols SNMPv1/v2c/v3, Web (JAVA),CLI(Telnet/Console),RMON
(1,2,3,9), Cluster,SSH,SNTP, Syslog

Chapter1ProductOverviewHardwareManual
1-6
Other protocols DHCPRelay,DNSClient
Jumbo Frame Supported
Dimensions
(L xWxH) 440 x435 x44 mm
Weight About 8.5 kg forS5750 and S5750S
About 9 kg forS5750P
Powersupply
S5750, S5750S:
ACvoltage: 176-264VAC, at 48 Hz-60 Hz,with maximum current
<0.4 A
DC voltage (RPS power):10.6 -13.2 VDC, with maximumcurrent
<6.6 A
S5750P:
ACvoltage: 100-240VAC at 48Hz-60 Hz
Without POE: maximumcurrent <0.7 A;
With POE: maximumcurrent <4.8 A
Power
consumption
Without expansion module:<54W; with expansion module: <70 W;
When all portsare connected with PD fortheS5750P:<460 W
Temperature Operating temperature: 0ºC-45ºC
Storage temperature -40ºC-70ºC
Humidity Operating humidity:10%~90%RH
Storage humidity:5%-90%RH
Table1-2 Technicalspecificationsofthe S5750 -2
Productmodel S5750-24SFP/12GT
Fixedport 24 1000M SFPportsand12 multiplexing 10/100/1000M RJ-45
ports, 2 10Gextention slots
Availablemodule
Mini-GBIC-SX:single-port1000BASE-SXminiGBICconversion
module (LC interface);
Mini-GBIC-LX:single-port1000BASE-LXminiGBICconversion
module (LC interface):
Mini-GBIC-ZX50:single-port1000BASE-ZXminiGBICconversion
module (LC connector), 50km;
Mini-GBIC-ZX80: singleport1000BASE-ZXminGBIC conversion
module (LC interface), 80km
M5700-01XENPAK:1-portXENPAK interface10Gconversion
board

HardwareManualChapter1ProductOverview
1-7
M5700--01XFP:1-port XFPinterface 10Gconversion board
M5700-STACK: Singleport10Gstackmodule
10Gfiberinterfacemodule(300M),applied togetherwiththe
M5700-01XENPAKconversion board
10 GfiberLRinterfacemodule(10KM),appliedtogetherwiththe
M5700-01XENPAKconversion board.
10GfiberERinterfacemodule(40km),appliedtogetherwiththe
M5700-01XENPAKconversion board.
10 GfiberSRinterfacemodule(300m),applied togetherwith
M5700-01XFPconversionboard
10GfiberLR interfacemodule(10Km),applied togetherwiththe
M5700-01XFPconversionboards
10GfiberERinterfacemodule(40Km),appliedtogetherwiththe
M5700-01XFPconversionboard
Packetforwarding
rate
L2: wire speed (66 Mpps)
L3: wire speed (66 Mpps)
802.1qVLAN 4 K
ACL
StandardIPACL(IPaddress based hardwareACL)
Extended IPACL (IPaddress based and TCP/UDPportnumber
based hardware ACL)
MACextended ACL (sourceMACaddress based, destinationMAC
address based and optionalEthernet typebased hardware ACL)
Time-based ACL
ExpertlevelACL(hardwareACL basedon the flexiblecombinations
ofVLANnumber,Ethernet type,MACaddress,IPaddress,
TCP/UDPport number, protocoltype, and time)
L2Protocol
IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3x, IEEE802.3ae,
IEEE802.3ak, IEEE802.3ad, IEEE802.1p, IEEE802.1x,
IEEE802.3ab, IEEE802.1Q(GVRP), IEEEE802.1d, IEEE802.1w,
IEEE802.1s,IGMPSnooping v1/v2/v3,LLDP
DefeatDoSAttack
Supported
DefeatIPScan Supported
L3Protocol OSPF,ECMP/WCMP,RIPv1/v2, PIM(DM/SM/SSM),DVMRP,
VRRP, IGMPv1/v2/v3
Management
protocols SNMPv1/v2c/v3, Web (JAVA),CLI (Telnet/Console),RMON
(1,2,3,9), Cluster,SSH,SNTP, Syslog
Other protocols DHCPRelay,DNSClient
Jumbo Frame Supported

Chapter1ProductOverviewHardwareManual
1-8
Dimensions
(L xWxH) 440 x435 x44 mm
Weight About 8.5 kg
Powersupply
ACvoltage: 176-264 VAC,at 48 Hz-60 Hz,with maximumcurrent
<0.4 A
DC voltage(RPSpower):10.6 -13.2VDC, withmaximumcurrent
<6.6 A
Power
consumption Without expansion module:<54W; with expansion module: <70 W;
Temperature Operating temperature: 0ºC-45ºC
Storage temperature -40ºC-70ºC
Humidity Operating humidity:10%~90%RH
Storage humidity:5%-90%RH
Table1-3 Technicalspecificationsofthe S5750 -3
Productmodel S5750-48GT/4SFP
S5750S-48GT/4SFP
Fixedport 48 10/100/1000MRJ45portsand 4multiplexing SFPports,210G
expantionslots
Availablemodule
Mini-GBIC-SX:single-port1000BASE-SXminiGBICconversion
module (LC interface);
Mini-GBIC-LX:single-port1000BASE-LXminiGBICconversion
module (LC interface):
Mini-GBIC-ZX50:single-port1000BASE-ZXminiGBICconversion
module (LC connector), 50km;
Mini-GBIC-ZX80: singleport1000BASE-ZXminGBIC conversion
module (LC interface), 80km
M5700-01XENPAK:1-portXENPAK interface10Gconversion
board
M5700--01XFP:1-port XFPinterface 10Gconversion board
M5700-STACK: Single-port10Gstackmodule
10Gfiberinterfacemodule(300M),applied togetherwiththe
M5700-01XENPAKconversion board
10Gfiberinterfacemodule(10KM),applied togetherwiththe
M5700-01XENPAKconversion board.
10GfiberERinterfacemodule(40km),appliedtogetherwiththe
M5700-01XENPAKconversion board.

HardwareManualChapter1ProductOverview
1-9
10GfiberSRinterfacemodule(300m),appliedtogetherwith
M5700-01XFPconversionboard
10GfiberLR interfacemodule(10Km),applied togetherwiththe
M5700-01XFPconversionboards
10GfiberERinterfacemodule(40Km),appliedtogetherwiththe
M5700-01XFPconversionboard
Packetforwarding
rate
L2: wire speed (102 Mpps)
L3: wire speed (102 Mpps)
802.1qVLAN 4 K
ACL
StandardIPACL(IPaddress based hardwareACL)
Extended IPACL (IPaddress based and TCP/UDPportnumber
based hardware ACL)
MACextended ACL (sourceMACaddress based, destinationMAC
address based and optionalEthernet typebased hardware ACL)
Time-based ACL
ExpertlevelACL(hardwareACL basedon the flexiblecombinations
ofVLANnumber,Ethernet type,MACaddress,IPaddress,
TCP/UDPport number, protocoltype, and time)
L2Protocol
IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3x, IEEE802.3ae,
IEEE802.3ak, IEEE802.3ad, IEEE802.1p, IEEE802.1x,
IEEE802.3ab, IEEE802.1Q(GVRP), IEEEE802.1d, IEEE802.1w,
IEEE802.1s,IGMPSnooping v1/v2/v3,LLDP
DefeatDoSAttack
Supported
DefeatIPScan Supported
L3Protocol OSPF,ECMP/WCMP,RIPv1/v2, PIM(DM/SM/SSM),DVMRP,
VRRP, IGMPv1/v2/v3
Management
protocols SNMPv1/v2c/v3, Web (JAVA),CLI (Telnet/Console),RMON
(1,2,3,9), Cluster,SSH,SNTP, Syslog
Other protocols DHCPRelay,DNSClient
Jumbo Frame Supported
Dimensions
(L xWxH) 440 x420 x44 mm
Weight About 9 kg
Powersupply
ACvoltage: 176 -264 VAC, at 48 Hz –60 Hz, with maximum
current <0.6 A
DC voltage (RPSpower): 10.6 -13.2 VDC,with maximumcurrent
<7.5 A
Power Without expansionmodule:<90W;with expansion module: <105

Chapter1ProductOverviewHardwareManual
1-10
consumption W;
Temperature Operating temperature: 0ºC-45ºC
Storage temperature -40ºC-70ºC
Humidity Operating humidity:10%~90%RH
Storage humidity:5%-90%RH
Table1-4 Technicalspeificationsforthe S5750 -4
Productmodel S5750P-48GT/4SFP
Fixedport 48 10/100/1000MRJ45ports,4combo SFPports,and 210G
expantionslots
Availablemodule
Mini-GBIC-SX:single-port1000BASE-SXminiGBIC
conversion module (LC port)
Mini-GBIC-LX:single-port1000BASE-LXminiGBIC conversion
module (LC port)
Mini-GBIC-ZX50:single-port1000BASE-ZXminiGBIC
conversion module (LC interface), 50 km
Mini-GBIC-ZX80:single-port1000BASE-ZXminiGBIC
conversion module (LC port), 80 km
M5700-01XENPAK: 1-portXENPAK 10Gconversion board
M5700-01XFP: 1-portXFP10Gconversion board
M5700-STACKL: Single-port 10Gstackmodule
10Gfiberinterfacemodule(300 m),applied togetherwith the
M5700-01XENPAKconversion board
10Gfiberinterfacemodule(10 km),appliedtogetherwiththe
M5700-01XENPAKconversion board.
10GfiberERinterfacemodule(40km),appliedtogetherwith
the M5700-01XENPAKconversion board.
10GfiberSRinterfacemodule(300 m),applied togetherwith
the M5700-01XFPconversion board
10GfiberLRinterfacemodule(10km),appliedtogetherwith
the M5700-01XFPconversion board.
10GfiberERinterfacemodule(40km),appliedtogetherwith
the M5700-01XFPconversion board.
Packet
forwarding rate L2: wire speed (102 Mpps)
L3: wire speed (102 Mpps)
802.1qVLAN 4 K
802.3afPOE Supported

HardwareManualChapter1ProductOverview
1-11
standard
ACL StandardIPACL(hardware ACL based on the IPaddress)
Extended IPACL(hardwareACL based on theIPaddress or
TCP/UDPport number)
MACextendedACL (hardwareACL basedonthesourceMAC
address based,destination MACaddress and optionalEthernet
type)
Time-based ACL
ExpertlevelACL(hardwareACL based on theflexible
combinationsofVLAN number, Ethernettype, MACaddress,IP
address, TCP/UDPportnumber, protocoltype, and time)
L2protocol IEEE802.3,IEEE802.3u, IEEE802.3z,IEEE802.3x,
IEEE802.3ae, IEEE802.3ak,IEEE802.3ad,IEEE802.1p,
IEEE802.1x,IEEE802.3ab, IEEE802.1Q(GVRP),
IEEEE802.1d,IEEE802.1w,IEEE802.1s,IGMPSnooping
v1/v2/v3, LLDP
DefeatDoS
Attack Supported
DefeatIPScan Supported
L3protocol OSPF,ECMP/WCMP,RIPv1/v2, PIM (DM/SM/SSM),DVMRP,
VRRP, IGMPv1/v2/v3
Management
protocol SNMPv1/v2/v3, Web (JAVA),CLI (Telnet/Console),RMON
(1,2,3,9), cluster,SSH, SNTP, Syslog
Other protocols DHCPRelay,DNSClient
Jumbo Frame Supported
Dimensions
(WxDxH) 440 ×420 ×44 mm
Weight About 12 Kg
Powersupply ACvoltage:176-264VAC, at48Hz –60 Hz,withmaximum
current <6 A
DC voltage(RPSpower):51.895 –55.105VDC,with maximum
current <16.3A
Power
consumption Without the externalPDoverloadortheextension module: <90
W;
Without the externalPDoverload but withthe extension
module: <105W;
Without theexternal48-portPDoverloadortheextension
module: <830W;
Without the external48-portPDoverload butwith the extension

Chapter1ProductOverviewHardwareManual
1-12
module: <845W;
Temperature Working temperature: 0ºCto 45ºC
Storage temperature: -40ºC to 70ºC
Humidity Working humidity:10%to 90%RH
Storage humidity:5%to 90%RH
1.3 Product Appearance
Figure 1-1 Appearanceofthe RG-S5750(S)-24GT/12SFP
Figure 1-2 Appearanceofthe RG-S5750P-24GT/12SFP