Ryobi R160 Operating and installation instructions

Ryobi Technologies, Inc.
Anderson, South Carolina, 29625
Service Level
MANDATORY
SERVICE INFORMATION
SERVICE INFORMATION
Product -
Ryobi Corded Powertools -
Routers - R160, R161, R165, R175, R180, R6112, RE170, RE170VS,
RE175, RE185
Belt Sanders -B713, B713R, B713S, B792S, B792RH
Craftsman Corded Powertools-
Routers-17444,17500,17504,17513,17514,24399,24471,24475,
24500,24599,27500
BeltSanders -11712,11714,11791,11792,24222,24223,24229,
24233,24240,24290,25222,25233,25241,117131,
117151,117921
Identification -When replacing the switch, the use the appropriate wiring
diagram to connect the leads from the original switch to the replacement switch.
Condition - The switch manufacture has changed from Eaton to Defond which
has a different wiring configuration.
Reme_v - Using the attached wiring schematic or the schematic accompanying
the new switch, select the appropriate wiring diagram (Router or Belt Sander)
by model number. Transfer the wiring accordingly from the original switch to
the new switch terminal locations. Perform all safety checks and operate the
product to ensure proper operation is obtained.
For technical assistance contact Ryobi technical support at 1-800-525-2579, or
Craftsman technical support at 1-800-932-3188.
Page 1of 1 gpena SVCINFO998895-001 -102504