Safe Fleet PRIME DESIGN PBB 6001 User manual

PRIME DESIGN, A SAFE FLEET BRAND ▪ Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118
Toll Free: 1.8.PRIME.RACK ▪ Fax: [phone] ▪ Email: [email protected] ▪ Website: www.primedesign.net

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
2
2
1
3
Channels (2X)
Screws (8X) End Caps (4X) Brackets (4X)
PBB-6001 ASSEMBLY INSTRUCTIONS–PACKAGING CONTENTS
CONTENTS OVERVIEW
1—FBM-0002 ........................................................ (Qty 1)
Channels with hardware
INSTALLER NOTE: Mounting Hardware or
Brackets to attach this rack to a vehicle
roof or cap are not included in this kit,
and must be purchased separately.
To purchase Mounting Hardware or
Brackets, please contact Prime Design
Sales & Support.
2—Crossbar Assembly........................................... (Qty 2)
3—Ladder Stop Assembly ..................................... (Qty 4)
1.75”

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
3
Rear
Rear
Front
Left
Right
Crossbar Rear
Flush to end
Rear
Front
Left
Right
Crossbar Rear
Flush to Channel End
91.00”
*Note: Use Alternate instructions if marked distances exceed 18” (457mm).
*See Note
PBB-6001 ASSEMBLY INSTRUCTIONS–FBM MOUNTINGS
FBM-0002 FLUSH
CHANNELS TO PRE–INSTALLED
MOUNTING BRACKETS
A.1
A.2
Loosen nuts
A.4
Loosen nuts
A.5 Set to distances then torque Rear Bracket nuts to 90 in-lbs
A.3 Set to distances then torque nuts to 80 in-lbs

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
4
Rear
Rear
Front
12—5/16” (313mm) from end
Crossbar Rear
Left
Right
Rear
Front
Left
Right
Crossbar Rear
Flush to Channel End
91.00”
*Note: Move Channels rearward if marked front distance exceeds 18” (457mm).
*See Note
PBB-6001 ASSEMBLY INSTRUCTIONS–FBM MOUNTINGS
FBM-0002 ALTERNATE
CHANNELS TO PRE–INSTALLED
MOUNTING BRACKETS
B.1
B.2
Loosen nuts
B.4
Loosen nuts
B.5
B.3
Set to distances then torque Rear Bracket nuts to 90 in-lbs
Set to distances then torque nuts to 80 in-lbs

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
5
PBB-6001 ASSEMBLY INSTRUCTIONS–BASE ASSEMBLY
1
2
Rear
Front
Even EvenFront
Even EvenRear
BASE ASSEMBLY
CROSSBARS CROSSBAR ADJUSTMENT
1.1
Torque to
90 in-lbs 1.2