Sauder Harbor View 401328 User manual

NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
Enlish p 1-18
Français p 19-21
Español p 22-24
Lot # 373129 05/21/15
Purchased: __________________
Be sure to ive us a rin before
makin any returns. 1-800-523-3987
Niht Stand
Harbor View Collection | 401328
Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-523-3987.
Share your journey!
sauder.com
Sweet stand.
Sweet dreams.

Table of Contents Assembly Tools Required
3
4
5-18
19-21
22-24
25-26
27
Part Identification
Hardware Identification
Assembly Steps
Français
Español
Safety
Warranty
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Skip the power trip.
This time.
401328 www.sauder.com/servicesPae 2

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the ede
to help distinuish similar parts from each other. Use this part identification to help identify similar parts.
A RIGHT END (1)
B LEFT END (1)
C TOP (1)
D BOTTOM (1)
D44 RIGHT DRAWER SIDE (1)
D45 LEFT DRAWER SIDE (1)
D115 DRAWER BACK (1)
D723 DRAWER BOTTOM (1)
E BRACE (1)
F BACK (1)
G2 DRAWER FRONT (1)
K BOTTOM MOLDING (1)
L BRACE MOLDING (1)
M57 SKIRT (1)
N FRONT MOLDING (1)
O RIGHT MOLDING (1)
P LEFT MOLDING (1)
Q END MOLDING (2)
V FOOT (2)
M67 DRAWER BRACE (1)
Now you know
our ABCs.
401328www.sauder.com/services Pae 3
A
B
C
D
E
F
G2
M67
K
L
M57
N
O
P
Q
QV
V
D44
D45
D115
D723

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
401328 www.sauder.com/servicesPae 4
40CA CABINET RIGHT - 1 40CB CABINET LEFT - 1 40CC DRAWER RIGHT - 1 40CD DRAWER LEFT - 1
FOOT SCREW - 2
WHIDDEN
CONNECTOR - 4
XHIDDEN CAM - 7
1F CAM DOWEL - 7 2F
ANGLE
BRACKET - 4
AA DRAWER FRONT
BRACKET - 1
BB MOLDING
CONNECTOR - 2
DD KNOB - 1 EE
BLACK 2-1/4" FLAT HEAD SCREW - 4
FF BLACK 1-7/8" FLAT HEAD SCREW - 2
GG
BLACK 1-5/8" PAN HEAD SCREW - 7
HH
BLACK 1-1/4" FLAT HEAD SCREW - 4
II SILVER 1-1/4" PAN HEAD SCREW - 1
JJ
BLACK 9/16" LARGE HEAD SCREW - 12
KK LL GOLD 5/16" FLAT HEAD SCREW - 8
NAIL - 20
MM CONNECTOR SCREW - 4 NN
30S BLACK 1-9/16" FLAT HEAD SCREW - 5

Step 1 Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
åInsert a CONNECTOR SCREW (NN) into each
HIDDEN CONNECTOR (X).
401328www.sauder.com/services Pae 5
Step 2
åAssemble your unit on a carpeted floor or on the empty
carton to avoid scratchin your unit or the floor.
åUse your hammer to tap four HIDDEN CONNECTORS (X)
with SCREWS into the BRACE (E).
NN
X
X
X
E

Step 3
401328 www.sauder.com/servicesPae 6
Arrow
1F
2F
Arrow
1F
2F
å Push seven HIDDEN CAMS (1F) into the BOTTOM (D),
BRACE (E), and DRAWER BRACE (M67). Then, insert the
metal end of a CAM DOWEL (2F) into each HIDDEN CAM.
Arrow
1F
2F
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Arrow
Do not tihten the HIDDEN CAMS in this step.
(7 used)
E
D
M67

Step 4
401328www.sauder.com/services Pae 7
å Fasten the CABINET RIGHT (40CA) and CABINET
LEFT (40CB) to the ENDS (A and B). Use four GOLD
5/16" FLAT HEAD SCREWS (LL) throuh holes #1 and #3.
å Fasten four ANGLE BRACKETS (AA) to the ENDS (A and B).
Use four BLACK 9/16" LARGE HEADS SCREWS (KK).
å NOTE: Be sure the edes of the ANGLE BRACKETS are
even with the edes of the ENDS.
GOLD 5/16" FLAT HEAD SCREW
(4 used for the RAILS)
LL
1
2
3
4
1
2
34
Roller end
Roller end
AA
AA
B
A
BLACK 9/16" LARGE HEAD SCREW
(4 used for the ANGLE BRACKETS)
KK
Remember:
Rihty tihty.
Lefty loosey.

Step 5
å Fasten the SKIRT (M57) to the BOTTOM MOLDING (K).
Use two BLACK 1-7/8" FLAT HEAD SCREWS (GG).
å Fasten the BOTTOM MOLDING (K) to the BOTTOM (D).
Use four BLACK 1-1/4" FLAT HEAD SCREWS (II).
401328 www.sauder.com/servicesPae 8
BLACK 1-1/4" FLAT HEAD SCREW
(4 used for the BOTTOM MOLDING)
II
BLACK 1-7/8" FLAT HEAD SCREW
(2 used for the SKIRT)
GG
D
K
M57
Surface with
HIDDEN CAMS
Rounded ede
Finished surface
Unfinished
surface

å Fasten the ENDS (A and B) to the BOTTOM (D). Tihten
four HIDDEN CAMS.
Step 6
401328www.sauder.com/services Pae 9
Start Tighten
Arrow
Minimum
190 derees
Caution
Risk of damae or
injury. HIDDEN CAMS
must be completely
tihtened. HIDDEN
CAMS that are not
completely tihtened
may loosen, and parts
may separate. To
completely tihten:
Arrow
Maximum
210 derees
D
Surface with
HIDDEN CAMS
K
B
A
Finished ede
Finished ede
Do not stand the unit upriht without the
BACK fastened. The unit may collapse.
Caution

Step 7
å Tap two MOLDING CONNECTORS (DD) into the notches in
the MOLDINGS (N, O, and P).
å Fasten the MOLDINGS (N, O, and P) to the ENDS (A and B).
Use four BLACK 2-1/4" FLAT HEAD SCREWS (FF).
401328 www.sauder.com/servicesPae 10
Use your hammer to tap the
MOLDING CONNECTORS (DD)
into the notches in the MOLDINGS.
Flat end
Flat end
DD
DD
P
O
N
P
O
N
B
A
Finished surface
BLACK 2-1/4" FLAT HEAD SCREW
(4 used in this step)
FF