Savant PRO REM-1000 User manual

Savant® REM-1000 Pro System Remote and Base
Quick Reference Guide
For Product Info
REM-1000-00 |009-1378-00 | 160326
45 Perseverance Way, Hyannis, MA 02601
Copyright © 2016 Savant Systems, LLC
Savant.com | 508.683.2500
Box Contents
(1) Savant Pro Remote (SUR-1000)
(1) Savant Pro Remote Base (SRB-1000)
(1) USB Power Supply with international blades (025-0162-xx)
(1) 1.5 m USB A to micro USB B cable (064-0409-xx)
(1) Quick Reference Guide (this document)
Specifications
Environments
Temperature
32° to 104° F (0° to 40°C)
Humidity
10% to 90% (non-condensing)
Dimensions
Remote
(SUR-1000)
Base
(SRB-1000)
Shipping
Height
7.25 in (18.42 cm)
1.17 in (2.97 cm)
3.7 in (9.40 cm)
Width
2.0 in (5.08 cm)
4.17 in (10.59 cm)
4.9 in (12.45 cm)
Depth
1.06 in (2.7 cm)
3.10 in (7.87 cm)
8.8 in (22.35 cm)
Weight
0.35 lb (0.16 kg)
0.35 lb (0.16 kg)
1.7 lb (0.77 kg)
Power
Power Supply
100/240V AC (60/50 Hz) to 5V DC 2A
Base Input
5V DC 2A
Remote Battery
Rechargeable
Touch Screen (LCD)
High Resolution Multi Color Touchscreen Display
LCD Dimensions
2.57 in (6.53 cm) x 1.46 in (3.7 cm)
Diagonal 2.95 in (7.49 cm)
Standards
Wireless
Wi-Fi® (802.11 b/g/n 2.4 GHz)
Bluetooth
Bluetooth v4.0
Security
WPA1™, WPA2™, WPA1™ + WPA2™, WEP
Regulatory
Safety and
Emissions
FCC Part 15 | CE Mark |
C-Tick | UL
Pro Remote Base
Contains FCC ID:
TLZ-CU277
Contains IC:
6100A-CU277
Pro Remote
FCC ID:
ASU-CRU0100
IC:
10052A-CRU0100
RoHS
Compliant
Minimum Supported Release
Savant OS
da Vinci 8.0
Additional Information
•The Pro Remote and Base need to be within 30 feet (9.14m) of
each other to communicate.
•Up to two Pro Remotes per user zone is supported.
•Automatic software updates to the Remote will initiate if it is
left cradled overnight and no A/V services are active.
•Software updates can be initiated manually from the About
page on the remote (only if update is available).
•The Pro Remote Base will receive firmware updates when an
updated version of firmware is available in the da Vinci
software running on the host.
Remote and Base
Power Button
Press/Release
•With the remote powered on, the power button
can toggle the last used A/V service on or off.
•Powers the Remote On. Remote will take about
5-7 seconds before Savant Logo appears.
Press/Hold (5 sec.) – Powers remote Off.
Microphone
The microphone for Voice Commands is positioned
behind the small hole on top of remote.
Touchscreen
Display
Multi-colored LCD display with multiple pages for
viewing and control of available services.
•Motion activated.
•One touch and swipe operation
•Controls for services
Volume
Increase or Decrease volume of the service selected on
the touchscreen display (active service).
Channel
Channel Up or Channel Down the service selected on
the touchscreen display (active service).
Scroll / Select
Standard up, down, left, and right arrows for on-screen
control. Press and hold the up/down arrows to page up
or page down the on-screen menus. Press the Select
button to select the highlighted item.
Voice
Command
Activate services, scenes, environmental controls, and
various other functions using voice commands. Press
and hold the Voice Command button, wait for the on-
screen prompt, and speak the commands clearly.
TIP! Speak the phrase Voice Commands into the
Remote to open a list of supported commands.
Remote Base
Charging
Station
Charges the battery when the
Remote is set into the Remote Base.
Wi-Fi Base
Station
Communicates with the Savant Host
over the local Wi-Fi network.
Bluetooth Base
Station
Communicates with the Pro Remote
using Bluetooth v4.0.
!

REM-1000-00 | 009-1378-00 | 160326
45 Perseverance Way, Hyannis, MA 02601
Copyright © 2016 Savant Systems, LLC
Savant.com | 508.683.2500
Remote Base LED States
Off - No Power
On Solid (Yellow) - The base is rebooting
Blinks Once (Yellow) - The base is in Access Point Provisioning
Mode and ready to be provisioned and connected to the local
network.
Blinks Once (Green) - The base is provisioned and connected to
the local network.
On Solid (Green) - The base is connected to the local network
and communicating with the Savant Host.
Rapid Blink (Red) - The reset button on bottom of base is held
down for at least five seconds. When button is released, the rapid
blink will stop and the base will reboot.
Rapid Blink (Yellow) - The locate feature was activated using
SmartConnect.
Blinking Yellow/Green - Firmware is updating on the base.
Network Requirements
Savant requires the use of a wireless network that is configured to
make use of at least one of the supported wireless Standards
listed in the Specifications Table.
Connect all Savant devices to the same local area network (LAN)
or subnet as the host. Savant recommends not implementing any
type of traffic or packet shaping in your network topology for the
Savant devices as this may interfere with performance.
Network Configuration
To ensure that the IP Address will not change due to a power
outage, a static IP Address or DHCP reservation should be
configured. Savant recommends using DHCP reservation within
the router. By using this method, static IP Addresses for all
devices can be managed from a single UI, avoiding the need to
access devices individually.
Setting DHCP reservation varies from router to router. Refer to
the documentation for the router to configure DHCP reservation.
Refer to the REM-1000 Pro Remote Deployment Guide (009-
1398-xx) located on the Savant Customer Community for
information on connecting the Pro Remote Base to the local
network.
Additional Documentation
Additional Documentation is available on the Savant Customer
Community.
•REM-1000 Pro Remote Deployment Guide (009-1398-xx)
•REM-1000 Pro Remote User Guide (009-1399-xx)
FCC Interference Statement: Pro Remote and Base
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
−Reorient or relocate the receiving antenna.
−Increase the separation between the equipment and receiver.
−Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
−Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Radiation Exposure Statement: Pro Remote Base
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government.
The exposure standard for wireless device employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is
1.6W/kg.
*Tests for SAR are conducted using standard operating positions accepted by
the FCC with the device transmitting at its highest certified power level in all
tested frequency bands.
Radiation Exposure Statement: Pro Remote Base
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operate with
minimum distance 20cm between the radiator and your body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC
établies pour un environnementnon contrôlé. Cet équipement doit être installé
et utilisé avec un minimum de 20 cm de distance entre la source de
rayonnement et votre corps.
−This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter, except tested built-in radios.
The County Code Selection feature is disabled for products marketed in the
US/Canada.
−Cet appareil et son antenne ne doivent pas être situés ou fonctionner en
conjonction avec une autre antenne ou un autre émetteur, exception faites des
radios intégrées qui ont été testées. La function de sélection de l'indicatif du
pays est désactivée pour les produits commercialisés aux États-Unis et au
Canada.
FCC Identifier for Savant Remote
This device electronically displays the FCC declaration of conformity logo as
well as the FCC and IC identifier. This information can be found on the device
by accessing: Main Menu >Settings >About.
Identificateur de la FCC et d’IC pour Savant Remote
Ce périphérique par voie électronique affiche le logo de déclaration de
conformité FCC ainsi que l'identificateur de la FCC et d'IC. Cette information
peut être trouvée sur le terminal en accédant à: (menu principal) >Settings
(Paramètres) >About (A propos de).
Industry Canada Statement:
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes:
1. L'appareil ne doit pas produire de brouillage, et
2. L'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
−This Class B digital apparatus complies with Canadian ICES-003.
−Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
−This device complies with RSS-310 of Industry Canada. Operation is subject to
the condition that this device does not cause harmful interference.
−Cet appareil est conforme à la norme RSS-310 d'Industrie Canada. L'opération
est soumise à la condition que cet appareil ne provoque aucune interférence
nuisible.
−This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter, except tested built in radios.
The County Code Selection feature is disabled for products marketed in the
US/Canada.
−Cet appareil et son antenne ne doivent pas être situés ou fonctionner en
conjonction avec une autre antenne ou un autre émetteur, exception faites des
radios intégrées qui ont été testées. La function de sélection de l'indicatif du
pays est désactivée pour les produits commercialisés aux États-Unis et au
Canada.