Savant REM-2000 User manual

009-1530-02 | Pro Remote Multi-Room Quick Reference Guide
200129 | © 2020 Savant Systems, LLC
45 Perseverance Way, Hyannis, MA 02601
Savant.com | 508.683.2500
1 of 2
Power
Button
Press/Release:
– Powers the Remote on. Savant Logo will
appear in 5 to 7 seconds.
– When powered on, toggles the last used AV
service on or o.
Press/Hold (5 sec): Powers Remote o.
Microphone Microphone for Voice Commands.
IMPORTANT!: Do not insert objects into the
microphone opening.
Navigation
(D-pad)
– Standard up, down, left, and right arrows for
on-screen control.
– Press and hold the up/down arrows to page up
or page down the on-screen menus.
– Press the Select button at the center of the
D-pad to select the highlighted item.
Touchscreen
Display
– Multi-colored LCD display for viewing and
controlling available services.
– Motion activated.
– Touch and swipe operation.
Volume Increase or decrease volume of the active
service.
Channel Channel Up or Channel Down for the active
service.
Voice
Commands
Activate services, Scenes, environmental
controls, and other functions.
Press and hold, then wait for on-screen prompt,
speak commands clearly.
TIP: Say the phrase “Voice Commands” into the
remote to open a list of supported actions.
Service
Control
Generic service buttons for control over AV
services.
Function can change depending on Active
Service.
NOTE: Not all services are aected by all
buttons.
Remote
Base
Charges the battery when the remote is set into
the Remote Base.
A
B
C
D
E
F
G
H
I
RemoteBox Contents
(1) Pro Remote Multi-Room (model: SUR-2000-xx)
(1) Remote Base Charge Only (model: SRB-2000-xx)
(1) USB Power Supply with Interchangeable Blades (025-0162)
OR
(1) USB Power Supply - Domestic Use Only (025-0157)
(1) 1.5 m USB A to micro USB B cable (064-0409)
(1) Quick Reference Guide (009-1530-xx, this document)
IMPORTANT! Power supply included varies based on product SKU.
Environmental
Temperature 32° to 104° F (0° to 40° C)
Humidity 10% to 90% Relative Humidity (non-condensing)
Dimensions Height Width Depth Weight
Remote
(SUR-2000-xx)
7.24 in
183.8 mm
1.97 in
50.0 mm
1.06 in
27.0 mm
0.33 lb
0.15 kg
Remote Base
(SRB-2000-xx)
1.17in
29.6 mm
4.16 in
105.6 mm
3.10 in
78.8 mm
0.36 lb
0.16 kg
Display
Touchscreen High Resolution Multi-Color LCD Display
LCD Dimensions 2.57 in (65.3 mm) x 1.46 in (37.0 mm)
Diagonal 2.95 in (74.9 mm)
Power
Power Supply 100/240V AC (60/50 Hz) to 5V DC 2A
Base Input 5V DC 2A
Remote Battery Rechargeable Lithium-Ion
Standards
Wireless Wi-Fi® (802.11 b/g/n 2.4GHz/5.0GHz)
Security WPA™, WPA2™, WPA™ + WPA2™
Regulatory
Safety and
Emissions
FCC Part 15 CE C-Tick UL
Remote FCC ID: ASU-SUR2000
IC: 10052A-SUR2000
RoHS Compliant
Specifications
Status
LED
O: Not powered
Solid Green: Powered
Remote Base (Bottom)
Minimum Supported Release
Savant OS: da Vinci 8.7
CD
F
A
B
E
G
H
I
A
A
Savant® Pro Remote Multi-Room (REM-2000/REM-2000I)
Quick Reference Guide
For Product Info

009-1530-02 | Pro Remote Multi-Room Quick Reference Guide
200129 | © 2020 Savant Systems, LLC
45 Perseverance Way, Hyannis, MA 02601
Savant.com | 508.683.2500
2 of 2
FCC Identifiers for Pro Remote
This device electronically displays the FCC declaration of conformity logo as well as the
FCC and IC identifier. To view compliance information within the device user interface,
select About from the Settings menu.
Identificateur de la FCC et d’IC pour Pro Remote
Ce périphérique par voie électronique ache le logo de déclaration de conformité
FCC ainsi que l’identificateur de la FCC et d’IC. Pour découvrir les informations de
conformité dans l’interface utilisateur de l’appareil, sélectionnez À propos dans (About) le
menu Paramètres (Settings).
Radiation Exposure Statement: Pro Remote
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for exposure
to radio frequency (RF) energy set by the Federal Communications Commission of the U.S.
Government.
The exposure standard for wireless devices employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR
are conducted using standard operating positions accepted by the FCC with the device
transmitting at its highest certified power level in all tested frequency bands.
INDUSTRY CANADA STATEMENT: Pro Remote
This device complies with Industry Canada license-exempt RSS standard(s). Operation
is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
1. L’appareil ne doit pas produire de brouillage, et
2. L’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d’en compromettre le fonctionnement.
–This Class B digital apparatus complies with Canadian ICES-003.
–Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
–This device complies with RSS-310 of Industry Canada. Operation is subject to
the condition that this device does not cause harmful interference.
–Cet appareil est conforme à la norme RSS-310 d’Industrie Canada. L’opération
est soumise à la condition que cet appareil ne provoque aucune interférence
nuisible.
–This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter, except tested built-in
radios. The County Code Selection feature is disabled for products marketed
in the US/Canada.
–Cet appareil et son antenne ne doivent pas être situés ou fonctionner en
conjonction avec une autre antenne ou un autre émetteur, exception faites
des radios intégrées qui ont été testées. La fonction de sélection de l’indicatif
du pays est désactivée pour les produits commercialisés aux États-Unis et au
Canada.
Radiation Exposure Statement: Pro Remote
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.
Déclaration d’exposition aux radiations: Pro Remote
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un
environnementnon contrôlé. Cet équipement doit être installé et utilisé avec un minimum de
20 cm de distance entre la source de rayonnement et votre corps.
Network Requirements
Savant requires a wireless network that is configured to make use of at least one of the
supported wireless standards listed in the Specifications Table above.
Connect all Savant devices to the same local area network (LAN) or subnet as the host.
Savant advises against the use of any type of trac management or packet shaping
within network topology for Savant devices, as this may interfere with performance.
Network Configuration
To ensure that IP addresses do not change due to power outage, a static IP address or
DHCP reservation should be configured. Savant recommends DHCP reservation at the
router, allowing all IP addressing to be managed from a single UI, eliminating the need to
access devices individually.
The process for configuring DHCP varies based on router make/model. For
configuration assistance, refer to the manufacturer documentation for the router in use.
For information on provisioning the Savant Pro Remote to the local network, refer to the
Savant Pro Remote Deployment Guide (009-1531-xx), available via the Savant Customer
Community.
Additional Documentation
Additional documentation available on the Savant Customer Community.
– Savant Pro Remote Deployment Guide (009-1531-xx)
– Savant Pro Remote User Guide (009-1410-xx)
Additional Information
When available, Pro Remotes will receive and automatically apply over-the-air (OTA)
firmware updates if the following criteria are met:
– Remote is communicating with the Savant Host,
– Savant cloud user account is logged in on the Remote,
– Remote battery has at least a 50% charge.
Updates to Pro Remote firmware can also be initiated manually from the About menu
when available.
IMPORTANT! Savant recommends that Pro Remotes be placed in their base while
receiving firmware updates.
FCC INTERFERENCE STATEMENT: Pro Remote
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. There is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment to an outlet on a circuit dierent from that to which
the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for further
assistance.
FCC Caution
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user warranty.
This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
FCC and Regulatory Informaton