
KEY LOCK SECURITY SAFE
MODEL NO: SKS01, SKS02 & SKS04
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! These safes are heavy and care should be exercised in transit and handling to ensure that no one is injured.
WARNING! The SKS04 is a 2 man lift both for transit and installation.
9 Formaximumsecurity,thesesafesmustbesecurelyxedtoaoorand/orwall.Atalltimes,thesesafesshouldbepositionedona
leveloor/surface.
8DO NOTinstallinareaswheredampandcondensationarepresent.
2. INTRODUCTION
Heavy-dutysteelconstructionwithtwinlockingbolts.Powdercoatednishtohelppreventcorrosion.Compactdesign,pre-drilledholesand
securityxingsallowsafetobexedtotheoorand/ortothewallandhiddenawaydiscreetly.ModelnumbersSKS02andSKS04includea
singleshelftohelputilizetheareainsidethesafe.Suppliedwithtwokeys.
3. SPECIFICATION
Model No: ................................................................... SKS01 ................................................SKS02 ............................................ SKS04
External Dimensions (W x D x H):...........350 x 250 x 250mm ............................380 x 300 x 300mm ........................ 350 x 330 x 500mm
Internal Dimensions (W x D x H):............345 x 230 x 245mm ............................375 x 280 x 295mm ........................ 345 x 310 x 495mm
Nett Weight: ................................................................8.64Kg ..............................................12.36Kg .......................................... 18.40Kg
ThicknessWall/Door: .................................................. 2/4mm ................................................ 2/4mm .............................................2/4mm
4. INSTALLATION
4.1. Carefulconsiderationshouldbegiventothesightingofthesafe
toensurethatitisdiscreetlyplacedandnoteasilyfoundbyany
intruders.
4.2. Eachsafeissuppliedwithfouranchorboltssuitableforxingto
brickandconcrete.
4.3. Fixingtohollowpartitionwallsisnotrecommended.Ifxedto
wooditmustbetoasolidwoodenstructure.
4.4. Openthedoorofthesafeandwiththehelpofasecondperson,
positionitwhererequiredandmarkthemountingpositions
throughthepre-drilledholesineitherthebackorthebaseof
the safe.
4.5. Drillfour10mmholestoadepthof38mmandinsertthefour
anchorboltswithnutsandwashersremoved.(g.1.1&2)
4.6. Positionthesafeoverthefourprotrudingmountingstudsand
supportittherewhilstplacingawasher,splitwasherandnut
ontoeachstud.(g.1.3)
4.7. Continuetosupportthesafewhilsttighteningthexingsusing
a10mmspanner.(g.1.4)
SKS01 SKS02 SKS04
g.1
SKS01SKS02SKS04Issue3(HF)21/12/18
Original Language Version
©JackSealeyLimited
Refer to
instructions