Sealey VS9203 User manual

INSTRUCTIONS FOR
TERMINAL TOOL KIT 23pc
MODEL NO: VS9203
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
I
MPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGEAND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! Wear approved eye protection. Wear appropriate Personal Protective Equipment. A full range of Personal Protective
Equipment is available from your Sealey stockist.
WARNING! Ensure that Health & Safety, Local Authority Regulations and general workshop practice Regulations are adhered to when
using tools.
8DO NOT use tools if damaged.
9Maintain tools to ensure that they are in an adequate condition for safe use and optimum performance.
9Ensure that a vehicle that has been raised by a jack is adequately supported. Use axle stands.
9Wear suitable clothing to avoid snagging. DO NOT wear jewellery. Tie back long hair.
9Account for all tools, parts and components being used. DO NOT leave these in or near the engine. Return tools to suitable storage
after use.
9When not in use, store in a safe, dry childproof place.
9Keep children and unauthorised persons away from the work area.
▲IMPORTANT! These instructions are intended as a guide only. Always refer to the vehicle manufacturer’s service instructions
or a proprietary manual to establish the correct procedure and data.
WARNING! The warnings, conditions and instructions in this manual cannot cover all possible conditions and situations. The Operator/
User must apply caution and common sense (good practical sense).
2. INTRODUCTION
Comprehensive kit, suitable for the removal of terminals on most wiring connectors. Reduce time spent on, and damage to, vehicle electrical
systems. Features soft grip handles with number identification.
VS9203 | Issue 1 15/12/17
Original Language Version
© Jack Sealey Limited
Refer to
Instructions Wear Eye
Protection Wear Protective
Clothing

3. APPLICATIONS
Tool No. Code No Tool Application
1 VS9203.01 BMW, Mercedes, VAG,
Vauxhall/Opel
2 VS9203.02 BMW, Jaguar, Mercedes,
Porsche, Saab,VAG
3 VS9203.03 BMW, Mercedes, Porsche,
VAG,Vauxhall/Opel
4 VS9203.04 Ford
5 VS9203.05 BMW, Ford, Mercedes,
Porsche, VAG, Vauxhall/
Opel
6 VS9203.06 BMW, Ford,Jaguar,
Mercedes, Porche, Saab,
VAG, Vauxhall/Opel
7 VS9203.07 Mercedes
8 VS9203.08 Ford, Jaguar, Mercedes,
Porche, VAG, Vauxhall/Opel
9 VS9203.09 Ford, Mercedes
10 VS9203.10 Mercedes
11 VS9203.11 BMW, Ford, Jaguar,
Mercedes, Porsche, Saab,
VAG, Vauxhall/Opel
12 VS9203.12 Renault, VAG, Vauxhall/
Opel
13 VS9203.13 Ford, Mercedes
14 VS9203.14 Ford, Jaguar, Porsche
15 VS9203.15 BMW, Ford, Mercedes,
VAG, Vauxhall/Opel
16 VS9203.16 BMW, Ford, Jaguar,
Mercedes, Porsche, VAG,
Vauxhall/Opel
VS9203 | Issue 1 15/12/17
Original Language Version
© Jack Sealey Limited

Tool No. Code No Tool Application
17 VS9203.17 BMW
18 VS9203.18 Mercedes
19 VS9203.19 Chrysler, Citroen, Fiat,
Ford, Honda, Mazda,
Mercedes, Mitsubishi,
Porsche, Renault, Toyota,
VAG, Vauxhall/Opel
20 VS9203.20 Ford
21 VS9203.21 BMW, Ford , Jaguar,
Mercedes, Porsche, Saab,
VAG, Vauxhall/Opel
22 VS9203.22 Honda, Toyota, VAG,
Vauxhall/Opel
23 VS9203.23 VAG, Vauxhall/Opel
VS9203 | Issue 1 15/12/17
Original Language Version
© Jack Sealey Limited
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 [e-mail] www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Parts support is available for this product. To obtain a parts, please log on to
www.sealey.co.uk, email [e-mail] or telephone [phone]