Sega PIRATES of MONSTER ISLAND User manual

IMPORTANT
• Before using this product, read this manual carefully to understand the
contents herein stated.
• After reading this manual, be sure to keep it near the product or in a
convenient place for easy reference when necessary.
OWNER'S MANUAL 420-0018UK
PIRATES OF MONSTER ISLAND
Sega Amusements Europe Limited.
42 Barwell Business Park, Leatherhead Road, Chessington, Surrey, KT9 2NY. United Kingdom.
Telephone: [phone] Facsimile: [phone]
email: [email protected] Web: http://www.segaarcade.com
Play It! Amusements, inc.
252 Beinoris Drive, Wood Dale, IL. 60191, USA
USA Sales: +00 (1) 224 265 4287
© SEGA
1st PRINTING

BEFORE USING THE PRODUCT,BE SURE TO READ THE FOLLOWING:
To maintain safety:
To ensure the safe operation of this product, be sure to read the following before usage.
The following instructions are intended for the users, operators and the personnel in charge of the operation of the
product. After carefully reading and sufciently understanding the warning displays and cautions, handle the product
appropriately. Be sure to keep this manual close to the product or in a convenient place for future reference.
Herein, explanations which require special attention are enclosed with dual lines. Depending on
the potentially hazardous degrees, the terms of DANGER, WARNING, CAUTION, etc. are used. Be sure to
understand the contents of the displays before reading the text.
Indicates that mishandling the product by disregarding this pictograph will
cause severe injury or death.
Indicates that mishandling the product by disregarding this warning will cause a
potentially hazardous situation which can result in death or serious injury.
Indicates that mishandling the product by disregarding this caution will cause a
slight hazardous situation which can
result in personal injury and/or material damage.
For the safe usage of the product, the following pictographs are used:
Indicates "HANDLE WITH CARE." In order to protect the human body and equipment, this display is at-
tached to places where the Owner's Manual, Serviceman Manual and/or Service Manual should be referred
to.
• Perform work in accordance with the instructions herein stated. Instructions for work are explained
by paying attention to the aspect of accident prevention. Failing to perform work as per the instructions
can cause accidents. In the case where only those who have technical expertise should perform the work
to avoid hazardous situation, the instructions herein state that the site maintenance personnel should
perform such work.
• Be sure to turn off the power before working on the machine. To prevent an electric shock, be sure
to turn off the power before carrying out any work that requires direct contact with the interior of the
product. If the work is to be performed in the power-on status, the Instruction Manual herein always states
to that effect.
• Be sure to ground the Earth Terminal. (This is not required in the case where a power cord with earth is
used.)
• This product is equipped with the Earth Terminal. When installing the product, connect the Earth
Terminal to the "accurately grounded indoor earth terminal" by using an earth wire. Unless the product is
grounded appropriately, the user can be subject to an electric shock. After performing repair, etc. for the
control equipment, ensure that the Earth Wire is rmly connected to the control equipment.
• Ensure that the Power Supply used is equipped with an Earth Leakage Breaker. This product does
not incorporate the Earth Leakage Breaker. Using a power supply which is not equipped with the Earth
Leakage Breaker can cause a re when earth leakage occurs.
• Besuretousefuseswhichmeetthespeciedrating. (Only for the machines which use fuses.)
Using fuses exceeding the specied rating can cause a re and an electric shock. (Only for the machines
which use fuses.)Using fuses exceeding the specied rating can cause a re and an electric shock.

• Specification changes (removal of equipment, conversion and addition) not designated by SEGA are
not allowed. The parts of the product include warning labels for safety, covers for personal protection, etc. It
is very hazardous to operate the product by removing parts and/or modifying the circuits. Should doors, lids
and protective parts be damaged or lost, refrain from operating the product, and contact where the product was
purchased from or the ofce herein stated. SEGA shall not be held responsible for any accidents, compensation
for damage to a third party, resulting from the specications not designated by SEGA.
• Ensure that the product meets the requirements of appropriate electrical specications. Before installing the
product, check for electrical specications. SEGA products have a nameplate on which electrical specications
are described. Ensure that the product is compatible with the power supply voltage and frequency requirements
of the location. Using any electrical specications different from the designated specications can cause a re
and an electric shock.
• Install and operate the product in places where appropriate lighting is available, allowing warning labels to be
clearly read. To ensure safety for the customers, labels and printed instructions describing potentially hazardous
situations are applied to places where accidents can be caused. Ensure that where the product is operated has
sufcient lighting allowing the warnings to be read. If any label is peeled off, apply it again immediately. Please
place an order with where the product was purchased from or the ofce herein stated.
• When handling the monitor, be very careful. (Applies only to products with monitors.) Some of the monitor
parts are subject to high tension voltage. Even after turning off the power, some portions are still subject to
high tension voltage sometimes. Monitor repair and replacement should be performed only by those technical
personnel who have knowledge of electricity and technical expertise.
• Be sure to adjust the monitor properly. (Applies only to products with monitors.) Do not operate the product
leaving on-screen ickering or blurring as it is. Using the product with the monitor not properly adjusted may
cause dizziness or a headache to an operator, a player, or the customers.
• When transporting or reselling this product, be sure to attach this manual to the product.
• In the case where commercially available monitors and printers are used in this product, only the contents
relatingtothisproduct areexplained herein.Somecommerciallyavailableequipmenthasfunctionsand
reactions not stated in this manual. Read this manual together with the specic instruction manual of such
equipment.
• Descriptionshereincontainedmaybesubjecttoimprovementchangeswithoutnotice.
• Thecontentsdescribedhereinarefullypreparedwithduecare.However,shouldanyquestionariseorerrorsbe
found,pleasecontactSEGA.
INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION
Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately after transporting
to the location. Nevertheless, an irregular situation may occur during transportation. Before turning on the power,
check the following points to ensure that the product has been transported in a satisfactory status.
• Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet?
• Are casters and adjusters damaged?
• Do the power supply voltage and frequency requirements meet with those of the location?
• Are all wiring connectors correctly and securely connected? Unless connected in the correct way, connector
connections can not be made accurately. Do not insert connectors forcibly.
• Do power cables have cuts and dents?
• Are all accessories available?
• Can all doors and lids be opened with the accessory keys? Can doors and lids be rmly closed?

INTRODUCTION
iii
INTRODUCTION
This manual is intended to provide detailed descriptions together with all necessary information covering the general
operation of electronic assemblies, electro-mechanicals, servicing control, spare parts, etc. for the product,
"PIRATES of MONSTER ISLAND"
This manual is intended for the owners, personnel managers in charge of operation of this product.
Operate the product after carefully reading and sufciently understanding the instructions.
In the unlikely event that the product does not function correctly, DO NOT allow anyone other than a technician
to touch the internal system. Turn off the power to the machine, making sure to unplug the electrical cord from the
outlet, and contact the ofce listed below or the point-of-purchase for this product.
Use of this product is unlikely to cause physical injuries or damage to property. However, points that require special
attention are indicated by bold text, the word “IMPORTANT” and the symbol below.
Indicates important information that, if ignored, may result in the mishandling
of the product and cause faulty operation or damage to the product.
Sega Amusements Europe Limited.
42 Barwell Business Park, Leatherhead Road, Chessington, Surrey, KT9 2NY. United Kingdom.
Telephone: [phone] Facsimile: [phone]
email: [email protected] Web: http://www.segaarcade.com.
Sega Total Solutions
42 Barwell Business Park, Leatherhead Road, Chessington, Surrey, KT9 2NY. United Kingdom.
Telephone: [phone] Facsimile: [phone]
email: [email protected] Web: http://www.segaarcade.com/spares
Play it! Amusements
252 Beinoris Drive, Wood Dale, IL. 60191, USA
USA Sales/Service +00(1) 224 265 4287
SPECIFICATIONS
CABINET
Machine Dimensions: 1,11m (43.7in.) [Width] x 1.70m (66.9in.) [Depth]
Machine Height: 2.2m (86.6in.) (Installed)
Machine Weight: 220kg Approx (Installed)
Power, maximum current: 2A (480w) @ 220~240Vac

iv
INTRODUCTION
Parts replacement, maintenance inspections and troubleshooting should be carried out by site maintenance personnel
or other qualied professionals. This manual includes directions for potentially dangerous procedures which should
only be carried out by professionals with the appropriate specialised knowledge.
The site maintenance personnel or other qualied professionals mentioned in this manual are dened as follows:
Site maintenance personnel:
Individuals with experience in maintaining amusement equipment, vending machines, etc., working under the super-
vision of the owner/operator of this product to maintain machines within amusement facilities or similar premises by
carrying out everyday procedures such as assembly, maintenance inspections, and replacement of units/expendable
parts.
Activities to be carried out by site maintenance personnel:
Amusement equipment/vending machine assembly, maintenance inspection and replacement of units/expendable
parts.
Other qualied professionals:
Persons employed by amusement equipment manufacturers, or involved in design, production, testing or mainte-
nance of amusement equipment. The individual should have either graduated from technical school or hold similar
qualications in electrical/electronics/mechanical engineering.
Activities to be carried out by other qualied professionals:
Amusement equipment/vending machine assembly, repair/adjustment of electrical/electronic/mechanical parts.
Denition of 'Site Maintenence Personnel or Other Qualied Individuals
Procedures not described in this manual or marked as ‘to be carried out by site
maintenance personnel or other qualied professionals’ should not be carried
out by personnel without the necessary skill or technology. Work carried out by
unqualied persons may cause serious accidents, including electrocution.

INTRODUCTION
v
Waste of Electrical and Electronic Equipment (WEEE) Statement.
The WEEE (Waste of Electrical and Electronic Equipment) directive places an obligation on all EU based manufac-
turers and importers of Electrical and Electronic Equipment to take back products at the end of their useful life. Sega
Amusements Europe Ltd accepts its responsibility to nance the cost of treatment and recovery of redundant WEEE
in the United Kingdom in accordance with the specied WEEE recycling requirements.
The symbol shown below will be on all products manufactured from 13th August 2005, which indicates this product
must NOT be disposed of with other normal waste. Instead, it is the user’s responsibility to dispose of their waste
equipment by arranging to return it to a designated UK collection point for the correct recycling of waste electrical
and electronic equipment.
For more information about where you can send your waste equipment for recycling contact your local authority of-
ce.
For non-UK users contact your local authority ofce for information on the recycling of Waste Electrical and Elec-
tronic Equipment.
Battery Recycling Statement.
The EC Directive on Batteries and Accumulators (2006/66/EC) aims to minimise the impact of batteries on the en-
vironment and encourage the recovery of the materials they contain. To achieve increased collection and recycling
of waste batteries, the Directive places ‘producer responsibility’ obligations on manufacturers and importers of
portable, industrial and automotive batteries.
The symbol shown below will be on all equipment tted with batteries from 26th September 2008 and indicates
they must NOT be disposed of with other normal waste. Instead, it is the user’s responsibility to dispose of used
batteries by arranging to return them to a designated collection point for the correct recycling.
For more information about where you can send your waste batteries for recycling contact your local authority of-
ce.
REGISTERED IN ENGLAND REGISTERED NO. 1711515
REGISTERED OFFICE: BLOCK C 42 BARWELL BUSINESS PARK, CHESSINGTON, SURREY KT9 2NY

vi
INTRODUCTION
Notes:
Intentionally left blank

vii
420-0018UK
TABLE OF CONTENTS
INTRODUCTION iii
1HANDLING PRECAUTIONS 1
2 PRECAUTIONS REGARDING INSTALLATION 4
3 PRECAUTIONS REGARDING OPERATION 7
4PART DESCRIPTIONS 10
5ACCESSORIES 11
6 ASSEMBLY AND INSTALLATION 12
6-1 INSTALLING THE CABINET 13
6-2 INSTALLING THE TICKETS 16
6-3 FIXATION TO SITE 18
6-4 POWER SUPPLY AND OTHER CONNECTIONS 20
6-5 TURNING ON THE POWER 21
7PRECAUTIONS WHEN MOVING THE MACHINE 23
7-1 PRECAUTIONS WHEN MOVING FROM SITE 24
8GAME DESCRIPTION 25
8-1 GAME OUTLINE 25
9EXPLANATION OF TEST AND DATA DISPLAY 27
9-1 SWITCH UNIT AND COIN METER. 28
9-2 TEST MODE 29
9-3 I/O CHECK 30
9-4 GUN CHECK 32
9-5 SCREEN CHECK 33
9-6 GAME OPTIONS 34
9-7 SOUND OPTIONS 35
9-8 COIN OPTIONS 36
9-9 TICKET OPTIONS 37
9-10BOOKKEEPING 38
9-11ALL FACTORY SETTINGS 40
10 CONTROLLER UNIT(S), SWITCHES AND BUTTONS 41
10-1 REMOVING THE CONTROLLER 42
10-2 ADJUSTING/REPLACING THE VOLUME POT 44
10-3 GREASING 47
11 LCD DISPLAY (VGA) 48
11-1 SAFETY PRECAUTIONS WHEN HANDLING THE MONITOR 48

viii
12 COIN HANDLING 54
12-1 CLEANING THE COIN SELECTOR 54
12-2 FAULT FINDING 57
12-3 ADJUSTING THE PRICE OF PLAY (EXCEL) 58
12-4 ADJUSTING THE PRICE OF PLAY (VTS) 59
13 LAMPS AND LIGHTING 63
13-1 COIN DOOR LAMP 63
13-2 FLUORESCENT TUBES - BILLBOARD 64
14 PERIODIC INSPECTION 68
15 TROUBLESHOOTING 70
15-1 TROUBLESHOOTING (WHEN NO ERROR MESSAGE IS SHOWN) 70
16 GAME BOARD 72
17 RF 8 KEY LED RGB CONTROLLER 75
18 DESIGN-RELATED PARTS 76
19 PARTS LIST 77
20 WIRE COLOUR CODE TABLE 81
21 SCHEMATIC DIAGRAMS 82

HANDLING PRECAUTIONS
1
1
1HANDLING PRECAUTIONS
When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that
the player can enjoy the game safely.
Noncompliance with the following points or inappropriate handling running counter to the cautionary matters herein
stated can cause personal injury or damage to the machine.
Before performing work, be sure to turn the power off. Performing the work
without turning the power off can cause an electric shock or short circuit.
In cases where work should be performed in the status of power on, this
manual always states to that effect.
To avoid an electric shock or short circuit, do not plug in or unplug quickly.
To avoid an electric shock, do not plug in or unplug with a wet hand.
Do not expose power cords or earth wires on the surface, (oor, passage,
etc.) If exposed, the power cords and earth wires are susceptible to
damage. Damaged cords and wires can cause an electric shock or short
circuit.
To avoid causing a fire or an electric shock, do not put things on or
damage the power cords.
When or after installing the product, do not unnecessarily pull the power
cord. If damaged, the power cord can cause a re or an electric shock.
In case the power cord is damaged, ask for a replacement through where
the product was purchased from or the ofce herein stated. Using the cord
as is damaged can cause re, an electric shock or leakage.
Be sure to perform grounding appropriately. Inappropriate grounding can
cause an electric shock.
Be sure to use fuses meeting the specied rating. Using fuses exceeding
the specied rating can cause a re or an electric shock.
Be sure that connections such as IC BD are made properly. Insufficient
insertion can cause an electric shock.
Specication changes, removal of equipment, conversion and/or addition,
not designated by SEGA are not permitted.
Failure to observe this may cause a fire or an electric shock. Non-
compliance with this instruction can have a bad inuence upon physical
conditions of the players or the onlookers, or result in injury during play.
SEGA shall not be held responsible for damage, compensation for damage
to a third party, caused by specication changes not designated by SEGA.
Do not perform any work or change parts not listed in this manual. Doing
so may lead to an accident.
If you need to perform any work not listed in this manual, request work
from the ofce indicated in this manual or the point of purchase, or inquires
for details.
Be sure to perform periodic maintenance inspections herein stated.