SEH mySND-120 User manual

Quick Installation Guide 1
Monday - Thursday
Friday
8:00 a.m. to 4:45 p.m. and
8:00 a.m. to 3:15 p.m. (CET)
℡[phone]
@[email protected]
File Access Server
mySND-120
Quick Installation Guide
Overview [en]
This Quick Installation Guide provides
a description of the installation of the
mySND-120. It contains the following
information:
General Information
Safety Regulations
Hardware Installation
Software Installation
Getting Started
File Access
Configuring the mySND-120
Please note the table of contents on
page 3. Should you have any further
questions, please contact our support
hotline.
Überblick [de]
Dieser Quick Installation Guide beinhaltet
eine Beschreibung der Installation des
mySND-120. Sie erhalten die folgenden
Informationen:
Allgemeine Information
Sicherheitsvorschriften
Hardware-Installation
Software-Installation
Erste Schritte
Dateizugriff
mySND-120 konfigurieren
Beachten Sie das Inhaltsverzeichnis auf
Seite 19. Falls Sie noch Fragen haben,
kontaktieren Sie unsere Support-
Hotline.

2 Quick Installation Guide
Date of Manufacture
The serial number includes the date of manufacture.
The serial number can be found on the type plate.

Quick Installation Guide [en] 3
2 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Scope of Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
LED Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
2 Safety Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2 Hardware Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2 Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2 Getting Started: InterCon-NetTool. . . . . . . . . . . . . . . . 11
Starting the InterCon-NetTool. . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Assigning an IP Address to the mySND-120. . . . . . . . . . . . . . 12
2 File Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2 Configuring the SND server . . . . . . . . . . . . . . . . . . . . . . 15
 Table of Contents

4 [en] Quick Installation Guide
General Information
Purpose
The File Access Server 'mySND-120' is used to safely deploy files within a
network. Files from a non-network-enabled SD card and a non-network-enabled
USB mass storage device (e.g. USB stick, hard drive, etc.) can be made available to
several network participants. To do this, the SD card is inserted into the
integrated network-enabled SD card reader. Alternatively, the USB mass storage
device is connected to the USB port of the mySND-120.
The files are accessed via the 'mySND File Browser'. The administration of the
mySND-120 is done via the 'mySND Control Center'.
Scope of Supply
Please check the package content before getting started:
SND server File Access Server 'mySND-120'
Quick
Installation
Guide
The Quick Installation Guide provides a brief
description of the installation of the mySND-120.
(This document)
Power pack External power pack

Quick Installation Guide [en] 5
Technical Data
Properties Values
Network connector logical:
physical: - 10BaseT/100BaseTX/1000BaseT (IEEE 802.3)
- RJ-45 (STP Cat. 5)
Device connection - 1 x USB port (USB 2.0 Hi-Speed)
- 1 x SD card reader (SD, SDHC)
Current input - 500 mA @ 5 VDC (without load)
- 1000 mA @ 5 VDC (with full load on the USB port)
Operating environment - Ambient temperature: 5 - 40 °C
- Relative humidity: 20 - 80 %
Dimensions - Width: 140 mm
- Height: 32 mm
- Depth: 99 mm
- Weight: 150 g
1) SD card reader
2) USB port
3) Link LED (green)
4) Activity LED (yellow)
5) Status LED (green)
6) Power LED (yellow)
7) LED for the SD card reader (green/
orange)
8) LED for the USB port (green/
orange)
9) Network connector (RJ-45) for
1000BaseT, 100BaseTX and
10BaseT
10) Reset button
11) Connector for the included power
pack
Ausschnitt SD
mySND-120
File Access Server
1 2 3456 78
Front view
- +5V
10 11
9
Rear view

6 [en] Quick Installation Guide
LED Display
The LEDs of the SND server provide information about its status.
LED Action Color Description
Link permanently on
permanently off
green
-
There is a connection to the network.
There is no connection to the network.
Activity blinks at
irregular
intervals
yellow Indicates the exchange of network data
packets.
Status permanently off
blinks 3 times
blinks 2 times
-
green
green
If the activity LED blinks periodically at the
same time, the BIOS mode is signalized.
Indicates the assignment of a ZeroConf IP
address.
Indicates the assignment of an IP address that
does not correspond to 0.0.0.0 or that comes
from outside the ZeroConf range.
Power permanently on
permanently off
yellow
-
The device is powered.
The device is not powered.
SD card reader permanently off
permanently on
flashing
permanently on
flashing
-
green
green
orange
orange
No SD card is available in the card reader.
An SD card is available in the card reader.
The SD card in the card reader is read-only.
The SD card in the card reader is being used
and must not be removed.
The SD card in the card reader cannot be
mounted because it was not formatted using
the FAT32, FAT16 or FAT12 file system.

Quick Installation Guide [en] 7
USB port permanently off
permanently on
flashing
permanently on
flashing
-
green
green
orange
orange
No USB device is connected to the port.
A USB device is connected to the port.
The USB device on the port is read-only.
The USB device on the port is being used and
must not be removed.
The USB device on the port cannot be
mounted because it was not formatted using
the FAT32, FAT16 or FAT12 file system.
LED Action Color Description

8 [en] Quick Installation Guide
Safety Regulations
SND servers are network devices for use in office environments. The mySND-120
is used for the integration of USB mass storage devices and as SD card reader in
TCP/IP networks.
Before starting the initial setup procedure and during the operation of the SND
server, please note the following safety regulations. Their purpose is to protect
yourself and others from personal injuries, and avoid damage to the equipment.
Read the documentation and make sure that your system meets the
requirements listed therein.
Avoid contact with humidity or liquids.
The device must only be connected and operated if it is in perfect condition.
Make sure that no-one steps on or stumbles over the cables.
If the supplied power cord cannot be used in your country, acquire an
appropriate power cord that suits national provisions. For more information,
please consult your retailer.
Do not connect a telephone cable to the RJ-45 connector. The RJ-45
connector may only be connected to SELV voltages. For the connection to the
RJ-45 connector only STP cabling (category 5 or better) may be used. The
shielding must fit flushly to the connector.
The device must only be operated using the power pack included in the
package.
Only use a certified USB cable (< 3 m) listed at www.usb.org.
To prevent data loss and/or data corruption on the respective removable medium
and consequential damages, we strongly recommend you to make a backup copy
of your data on a different storage medium before the initial operation, data
access and data procecessing. Keep the storage medium with the backup copy in
a safe place.
SEH Computertechnik GmbH will not be liable for loss of data and/or data
corruption, consequential damages or data recovery.

Quick Installation Guide [en] 9
Hardware Installation
A USB mass storage device can be connected directly to the SND server. You can use
an SD card via the SD card reader.
Connected removable media must have the 'FAT32', 'FAT16' or 'FAT12' file system.
Proceed as follows:
1. Insert the SD card into the SD card reader.
2. Connect the SND server and the USB mass storage device.
3. Connect the network cable (RJ-45) to the SND server.
4. Connect the power cord to the SND server.

10 [en] Quick Installation Guide
Software Installation
The 'InterCon-NetTool' has been developed by SEH Computertechnik GmbH for
the administration of SEH network devices. By means of this tool you can assign
a suitable IP address to the mySND-120, as described below.
In order to use the InterCon-NetTool, the program must be installed on a
computer. Different installation files are available, depending on the operating
system.
First, you have to download the installation file for the InterCon-NetTool from
the homepage of the SEH Computertechnik GmbH:
http://www.seh-technology.com/products/file-access-server/
mysnd-120-downloads.html
Scan this QR code using your smart phone to get direct access to the homepage.
Proceed as follows:
1. Start the InterCon-NetTool installation file.
2. Select the desired language.
3. Follow the installation routine.
The InterCon-NetTool will be installed on your client.

Quick Installation Guide [en] 11
Getting Started: InterCon-NetTool
Starting the InterCon-NetTool
Start the InterCon-NetTool on your client via the Windows start menu.
(Start JPrograms JSEH Computertechnik GmbH JInterCon-NetTool)
After the InterCon-NetTool was started, it searches the network for existing
devices and displays them in the 'device list'.
During the initial configuration, the client and the mySND-120 must be assigned
to the same local network segment.
Detailed information on how to use the InterCon-NetTool can be found
in the Online Help. To start the Online Help, select Help – Online Help
from the menu bar.


12 [en] Quick Installation Guide
Assigning an IP Address to the mySND-120
Once the mySND-120 is connected to the network, it checks whether an IP
address can be obtained via the boot protocols BOOTP or DHCP. If this is not the
case, the mySND-120 assigns itself an IP address via ZeroConf from the address
range (169.254.0.0/16) which is reserved for ZeroConf.
Once the mySND-120 has automatically received an IP address via a boot
protocol, you can save a freely definable IP address in the mySND-120.
Wizards facilitate the installation and configuration of network devices via the
InterCon-NetTool. Wizards are subprograms aimed at querying required
parameter values.
The 'IP Wizard' is available for the mySND-120. You can easily enter the desired IP
address and save it in the mySND-120 using the IP Wizard.
Proceed as follows:
1. Start the InterCon-NetTool.
2. Highlight the mySND-120 in the device list.
The mySND-120 is displayed in the device list under IP - 'ZeroConf' with an IP address
from the address range (169.254.0.0/16) which is reserved for ZeroConf.
3. Select Installation – IP Wizard from the menu bar.
The IP Wizard is started.
4. Follow the instructions of the IP Wizard.
The settings will be saved.

Quick Installation Guide [en] 13
File Access
Via the mySND File Browser you get access to files located on the removable
media that are connected to the SND server. The mySND File Browser is stored in
the SND server and can be launched by means of an Internet browser (Internet
Explorer, Firefox, Safari).
In order to access the mySND File Browser, you must log on to the SND server
first.
The user account 'Admin' and the password 'admin' have been configured by
default. Change the password when you use the SND server in a real situation;
see: mySND User Manual.
Make sure that:
- The SND server is connected to the network and the mains voltage.
- The SND server has a valid IP address.
- The connected removable media have the FAT32, FAT16 or FAT12 file system.
Proceed as follows:
1. Open your browser.
2. Enter the IP address of the SND server as the URL.
The login page appears.
If the login page is not displayed, check the proxy settings of your browser.
3. Enter the user name 'Admin'.
4. Enter the password 'admin'.
5. Click Login.
The mySND File Browser will be displayed in the browser.

14 [en] Quick Installation Guide
The USB port on the SND server is disabled by default. To enable the USB port,
see: mySND User Manual.
Detailed information about the mySND File Browser can be found
in the mySND Online Help.
To start the Online Help, click the icon.
?


Quick Installation Guide [en] 15
Configuring the SND server
The SND server can be configured and monitored via the mySND Control Center.
The mySND Control Center is stored in the SND server and can be launched by
means of an Internet browser (Internet Explorer, Firefox, Safari).
In order to access the mySND Control Center, you must log on to the SND server
first.
The user account 'Admin' and the password 'admin' have been configured by
default. Change the password when you use the SND server in a real situation;
see: mySND User Manual.
Make sure that:
- The SND server is connected to the network and the mains voltage.
- The SND server has a valid IP address.
Proceed as follows:
1. Open your browser.
2. Enter the IP address of the SND server as the URL.
The login page appears.
If the login page is not displayed, check the proxy settings of your browser.
3. Enter the user name 'Admin'.
4. Enter the password 'admin'.
5. Click Login.
The mySND File Browser will be displayed in the browser.
6. Click Control Center.
The mySND Control Center will be displayed in the browser.

16 [en] Quick Installation Guide
Detailed information about the configuration of the SND server
can be found in the mySND Online Help.
To start the Online Help, click the icon.
?


Quick Installation Guide [en] 17

18 [en] Quick Installation Guide

Quick Installation Guide [de] 19
2 Allgemeine Information . . . . . . . . . . . . . . . . . . . . . . . . . 20
Verwendungszweck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Lieferumfang. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Technische Daten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
LED-Anzeige . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
2 Sicherheitsvorschriften . . . . . . . . . . . . . . . . . . . . . . . . . . 24
2 Hardware-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
2 Software-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
2 Erste Schritte mit dem InterCon-NetTool. . . . . . . . . . 27
InterCon-NetTool starten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
mySND-120 eine IP-Adresse zuweisen. . . . . . . . . . . . . . . . . . . 28
2 Dateizugriff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
2 SND-Server konfigurieren. . . . . . . . . . . . . . . . . . . . . . . . 31
 Inhaltsverzeichnis

20 [de] Quick Installation Guide
Allgemeine Information
Verwendungszweck
Der File Access Server 'mySND-120' dient dem sicheren Bereitstellen von Dateien
in einem Netzwerk. Es können Dateien von einer nicht-netzwerkfähigen SD-Karte
und einem nicht-netzwerkfähigen USB-Massenspeichergerät (z.B. USB-Stick,
Festplatte usw.) für mehrere Netzwerkteilnehmer zur Verfügung gestellt werden.
Dazu wird die SD-Karte in den integrierten netzwerkfähigen SD-Card-Reader
eingeführt bzw. das USB-Massenspeichergerät an den USB-Port des mySND-120
angeschlossen.
Der Dateizugriff erfolgt über den 'mySND File Browser'. Die Verwaltung des SND-
Servers erfolgt über das 'mySND Control Center'.
Lieferumfang
Bitte überprüfen Sie den Packungsinhalt auf Vollständigkeit, bevor Sie die
Installation beginnen:
SND-Server File Access Server 'mySND-120'
Quick
Installation
Guide
Der Quick Installation Guide beinhaltet eine kurze
Beschreibung der Installation des mySND-120.
(Dieses Dokument)
Netzteil Externes Netzteil