Shuttle MV43 User manual

Shuttle®MV43/MV43N
Pentium 4/Celeron , 478-pin processor based DDR Mainboard
Manual Version 1.0
Copyright
Copyright©2002 by Shuttle®Inc. All Rights Reserved.
No part of this publication may be reproduced, transcribed, stored in a retrieval system, trans-
latedintoanylanguage,ortransmittedinanyformorbyanymeans,electronic,
mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without
prior written permission from Shuttle®Inc.
Disclaimer
Shuttle®Inc. shall not be liable for any incidental or consequential damages resulting from the
performance or use of this product.
This company makes no representations or warranties regarding the contents of this manual.
Information in this manual has been carefully checked for reliability; however, no guarantee is
given as to the correctness of the contents. In the interest of continued product improvement,
this company reserves the right to revise the manual or include changes in the specifications
of the product described within it at any time without notice and without obligation to notify any
person of such revision or changes. The information contained in this manual is provided for
general use by the customers.
Trademarks
Shuttle is a registered trademark of Shuttle Inc.
Intel Pentium is a registered trademarks of Intel Corporation.
VIA is a registered trademarks of VIA Corporation.
PS/2isaregisteredtrademarkofIBMCorporation.
AMIisaregisteredtrademarkofAMISoftwareInc.
MicrosoftandWindowsareregisteredtrademarksof Microsoft Corporation.
General Notice: Other brandandproduct names used herein are for identification purposes
onlyandmay be trademarks of their respective owners.
M672

- 1 -
WHAT'S IN THE MANUAL .................................................................... 5
Quick Reference ............................................................................................... 5
About This Manual ........................................................................................... 5
1 INTRODUCTION ................................................................................ 6
1.1 TO DIFFERENT USERS ............................................................................. 6
FIRST-TIMEDIYSYSTEMBUILDER ........................................................... 6
EXPERIENCEDDIY USER ........................................................................ 6
SYSTEMINTEGRATOR............................................................................... 6
1.2 ITEM CHECKLIST: ...................................................................................... 7
2 FEATURES ........................................................................................ 8
2.1 SPECIFICATIONS ....................................................................................... 8
3 HARDWARE INSTALLATION .......................................................... 11
3.1 STEP BY STEP INSTALLATION ................................................................11
Accessories of MV43/MV43N................................................................11
STEP1 Installthe CPU.......................................................................... 12
STEP 2 Set Jumpers............................................................................. 14
STEP3 InstallDDR SDRAMSystem Memory........................................ 14
STEP4 Install Peripherals in SystemCase............................................ 15
STEP5 Mountthe Mainboardon the Computer Chassis........................ 16
STEP6 ConnectFront Panel Switches/LEDs/Speaker/USB ................. 17
STEP 7 Connect IDE and Floppy Disk Drives........................................ 18
STEP8ConnectOther InternalPeripherals............................................ 19
STEP9 Connectthe PowerSupply........................................................ 19
STEP10 InstallAdd-on Cardsin ExpansionSlots.................................. 20
STEP11 Connect External Peripherals toBack Panel .......................... 21
STEP 12 First Time System Boot Up ..................................................... 22
STEP13 Install Drivers & SoftwareComponents ................................... 23
TABLE OF CONTENTS

- 2 -
3.2 JUMPER SETTINGS ................................................................................. 24
JUMPERS& CONNECTORS GUIDE.................................................... 25
Jumpers
Clear CMOS Setting (JBAT1) ............................................................... 28
CPU Clock Setting (JP1A1/JP1B1)....................................................... 28
DRAM Voltage Setting (JP1) ................................................................. 29
DDR/SDRDRAM Type Selector(J2A/B/C/D,J3A/B/C/D) ....................... 29
KeyboardPower On(JP2)...................................................................... 30
Back-Panel Connectors
PS/2Keyboard & PS/2Mouse Connectors............................................ 31
LANPort Connectors(MV43N only)........................................................ 31
USB1/USB2Port Connectors................................................................ 31
ParallelPortConnector.......................................................................... 31
COMPort Connector ............................................................................. 31
VGAPortConnector.............................................................................. 32
Line-OutPortConnector ........................................................................ 32
Line-InPortConnector ........................................................................... 32
Mic-InPortConnector ............................................................................ 32
MIDI/GAMEPortConnector ................................................................... 32
Front-Panel Connectors
HDDLEDConnector ............................................................................. 33
GreenLED Connector (SP_LED).......................................................... 33
HardwareResetConnector(RST) ......................................................... 34
ATXPowerOn/Off SwitchConnector(PW_BN) ..................................... 34
SpeakerConnector (SPK1)................................................................... 34
SleepSwitch (J12) ................................................................................ 35
LANLED Indicator(J16)........................................................................ 35
ExtendedUSB Header(USB1,USB2) ................................................... 35

- 3 -
Internal Peripherals Connectors
EnhancedIDE andFloppyConnector ................................................... 36
Other Connectors
ATX PowerSupply Connector(CN5) ...................................................... 37
CPU&System FanConnector .............................................................. 38
Wake-onLanConnector(WOL1) ........................................................... 38
Wake-onModemConnector(WOM1) .................................................... 39
SerialinfraredPort (SIR1)....................................................................... 39
Audio Cable Header (CD1/CD2)........................................................... 40
Front-PanelMicrophone and Line_outHeader (PANEL1) ...................... 40
3.3 SYSTEM MEMORY CONFIGURATION ..................................................... 41
1.INSTALLMEMORY............................................................................ 41
2.UPGRADEMEMORY........................................................................ 41
4 SOFTWARE UTILITY ...................................................................... 42
4.1 Mainboard CD Overview ......................................................................... 42
4.2 Install Mainboard Software Driver .......................................................... 43
4.2AInstallVIACHIPset Driver .............................................................. 44
4.2BInstall VGA Driver .......................................................................... 45
4.2CInstall AudioDriver ........................................................................ 46
4.2DInstall USB2.0 Driver ..................................................................... 47
4.2EInstallLANDriver(MV43NOnly) ..................................................... 48
4.3 View the User's Manual....................................................... 49
5 BIOS SETUP ................................................................................... 50
5.1 ENTER BIOS ............................................................................................. 50
5.2 THE MAIN MENU ...................................................................................... 51
STANDARD CMOS SETUP ...................................................................... 53

- 4 -
ADVANCED SETUP ................................................................................. 55
POWERMANAGEMENT SETUP.............................................................. 59
PCI/PLUGAND PLAYSETUP................................................................... 61
LOADOPTIMALSETTING ........................................................................ 62
LOADBEST PERFORMANCESETTING.................................................. 62
FEATUNESSETUP .................................................................................. 63
CPU PNP SETUP ..................................................................................... 66
HARDWAREMONITOR............................................................................. 67
CHANGEPASSWORD ............................................................................. 68
EXIT .......................................................................................................... 69

- 5 -
Quick Reference
Hardware Installation >> Step-by-Step ................................................ Page 11
Jumper Settings >> A Closer Look ...................................................... Page 24
Drivers/Software Utilities >> How to Install ......................................... Page 42
BIOS Setup >> How to Configure ......................................................... Page 50
About This Manual
For First-Time DIY System Builder ......................................................... Page 6
For Experienced DIY User ...................................................................... Page 6
For System Integrator ............................................................................. Page 6
WHAT'S IN THE MANUAL

- 6 -
1.1 To Different Users
First-Time DIY System Builder
Welcome to the DIY world! Building your own computer system is not as diffi-
cult as you may think. To make your first computer DIY experience successful,
right from the start, we have designed the 3.1 Hardware Installation section
in a step-by-step fashion for all the first-time DIY system builders. Prior to instal-
lation, we also suggest you to read the whole manual carefully to gain a com-
plete understanding of your new Shuttle MV43/MV43N mainboard.
Experienced DIY User
Congratulate on your purchase of the Shuttle MV43/MV43N mainboard. You
will find that installing your new Shuttle MV43/MV43N mainboard is just easy.
Bundled with an array of onboard functions, the highly-integrated MV43/
MV43N mainboard provides you with a total solution to build the most stable
and reliable system. Refer to sections 3.2 Jumper Settings and Chapter 4
Drivers/Software Utilities to find out how to get the best out of your new
mainboard. Chapter 5 BIOS Setup also contains the relevant information on
how to tune up your system to achieve higher performance.
System Integrator
You have wisely chosen Shuttle MV43/MV43N to construct your system. Shuttle
MV43/MV43N incorporates all the state-of-the-art technology of the P4 M266
chipset from VIA. It integrates the most advanced functions you can find to date
in a compact Micro ATX board.
1 INTRODUCTION
This manual adopted in MV43 and MV43N mainboards at the same time.
The difference between MV43 and MV43N is that MV43N equips with
onboard VIA VT6103 LAN PHY. In the manual, if there are some standards,
characters, equipment or software only appeared or adopted by MV43N; it
will be mentioned(MV43N only).

- 7 -
1.2 Item Checklist:
Check all items with you MV43/MV43N mainboard to make sure nothing is
missing. The complete package should include:
-One piece of Shuttle MV43/MV43N Mainboard
-One piece of ATA 100/66/33 Ribbon Cable
-IO Shielding
-One piece of Floppy Ribbon Cable
-One piece of twin ports USB Cable (optional)
-MV43/MV43N User's Manual
-One piece of Bundled CD-ROM with containing:
ØMV43/MV43N user's manual saved in PDF format
ØVIA Chipset System Driver
ØVIA VGA Driver
ØOnboard Audio controller driver
ØAMI Flashing Utility
ØLAN Driver (MV43N Only)
ØUSB2.0 Driver
950901BF
0147
UA0780765
93718CF 0145 UK120855
KB_MS
USB
COM1
COM2 PRT
AUDIO_GAME1
CD1
CD2
DDR2 DDR1
IDE1
IDE2
FDCCN5
ATX PWR
CN7
RG82845
QC22ES
PCI1
AGP
CNR1
PCI1
PCI2
JP2
SIR1
JP4J13
J12
JP1
J3D
J2/J3
J3C J3B J3A J2D J2C J2B J2A
JP1A1
JP1B1
J16
JBAT1
1
1
1
1
1
1
11 +-
SPK1
PANEL2
PANEL1
1
2
USB2
1
2
USB1
1
2
WOL1
WOM1
IT8705F
0115-BXA
M3Q040
CR2032
JAPANSTD
LITHIUMBATTERY
K T S
SYSTEM_FAN
CPU_FAN

- 8 -
MV43/MV43N mainboard is carefully designed for the demanding PC user who wants
high performance and maximum Intelligent features in a compact package.
2.1 Specifications
- CPU Support
Intel Pentium 4, 478-pin processors with 400 MHz FSB.
- Chipset
Features VIA VT8751(P4M266) N.B. and VIA VT8235 S.B..
- Integrated Graphics Controller
P4M266 integrates S3Savag4 TM graphics accelerator into a single chip.
P4M266 brings mainstream graphics performance to the Value PC with
leading-edge 2D, 3D and DVD video acceleration into a cost effective
package. Based on its capabilities, P4M266 is an ideal solution for the
consumer, corporate mobile users and entry-level professionals.
Maximum-shared memory size is 32MB.
- Built-in Ethernet LAN (MV43N only)
Built-in 10BaseT/100BaseTX Ethernet LAN.
VT8235 integrates Fast Ethernet MAC and VT6103 LAN PHY in compliance
with IEEE802.3u 100BASE-TX, 10BASE-T and ANSI X3.263 TP-PMD stan-
dards.
In compliance with ACPI 1.0 and the Network Device Class Power Manage-
ment 1.0.
- AC'97 Link for Audio and Telephony CODEC
AC'97 2.1 compliant.
Spread independent PCI functions for Audio and Modem.
- Versatile Memory Support
Two 184-pin DIMM slots to support up to 1GB of PC1600 or PC2100
compliant DDR SDRAM module.
or two 168-pin DIMM slots to support up to 1GB of PC100 or PC133
compliant SDR SDRAM module.
- PCI Expansion Slots
Provides two 32-bit PCI slots.
2 FEATURES

- 9 -
- AGP Expansion Slots
Provides one 32-bit AGP slot which supports 4X AGP devices.
- CNR Expansion Slot
Provides one CNR (Communication/ Network Riser) slot.
- 6 USB 2.0 Interface Onboard
Ø2 USB connectors on back-panel and two sets of dual USB ports headers
on mid-board.
- I/O Interface
Provides a variety of I/O interfaces:
Ø1* Floppy interface for 3.5-inch FDD with 720KB, 1.44MB, or 2.88MB
format or for 5.25-inch FDD with 360K or 1.2MB format.
Ø1*PS/2 mouse connector.
Ø1*PS/2 Keyboard connector.
Ø1*RJ45 LAN connector.(MV43N only)
Ø1*DB9 Serial connectors 16550 UART compatible.
Ø1*VGA port.
Ø1*DB25 Parallel port supports Standard Parallel Port and Bi-directional
(SPP), Enhanced Parallel Port (EPP), and Extended Capabilities Port
(ECP) data transmission schemes.
Ø1*Line-Out port.
Ø1*Line-In port.
Ø1*Mic-In port.
Ø1*MIDI/GAME port.
- PCI Bus Master IDE Controller Onboard
Two Ultra DMA 133/100 Bus Master Dual-channel IDE ports provide support
to a maximum of four IDE devices (one Master and one Slave per chan
The IDE Bus implements data transfer speeds of up to 133/100 MB/sec and
also supports Enhanced PIO Modes.
80-pin Cable Backward Compatible Legacy ATAPI Devices, ATAPI IDE CD-
ROM, CD-R, CD-RW, and LS-120 Supports.nel).
- ATX Power Supply Connector
ATX power supply unit can connected to the onboard 20-pin Pentium 4
standard ATX power connectors, supporting Suspend and Soft-On/Off by
dual-function power button.

- 10 -
- Advanced Configuration and Power Interface
Features four power saving modes: S1 (Snoop), S4 (Suspend to DISK), and S5
(Soft-Off). ACPI provides more efficient Energy Saving Features controlled by
your operating system that supports OS Direct Power Management (OSPM)
functionality.
- System BIOS
Provides licensed AMI BIOS 2Mb Flash core and supports Green PC, Desk-
top Management Interface (DMI).
- Micro ATX Form Factor
System board conforms to Micro ATX specification.
Board dimension: 244mm*244mm.
- Advanced Features
Ø Low EMI - Built in spread spectrum and automatic clock shut-off of
unused PCI/SDRAMS slots to reduce EMI.
Ø Dual Function Power Button - The system can be in one of two states,
one is Suspend mode and the other is Soft-Off mode. Pushing the power
button for less than 4 seconds places the system into Suspend mode.
When the power button is pressed for longer than 4 seconds, the system
enters Soft-Off mode.
Ø Modem Ring Power-On - The system can be powered on automatically by
the activation of modem ringing.
Ø CPU Clock Setting - This item allows users to adjust CPU Host Clock in
BIOS.
Ø CPU Multiplier Setting - This item allows users to adjust CPU Multiplier in
BIOS.
- Intelligent Features
Ø Voltage Monitoring - Monitors various voltages of key elements, such
as the CPU, and other critical system voltage levels to ensure stable
current passing through mainboard components.
Ø Fan Status Monitoring - To prevent CPU from overheating, the CPU fan
is monitored for RPM and failure. (CPU Cooling FAN with RPM sensor
is required.)
Ø Temperature Monitoring - This item allows users to make sure whether
the CPU or system runs in a suitable temperature.

- 11 -
Before removing or installing any of these devices including CPU, DIMMs, Add-On
Cards, Cables, please make sure to unplug the onboard power connector.
This section outlines how to install and configure your mainboard. Refer to the following
mainboard layout to help you to identify various jumpers, connectors, slots, and ports.
Then follow these steps designed to guide you through a quick and correct installation of
your system.
3.1 Step-by-Step Installation
3 HARDWARE INSTALLATION
Accessories Of MV43/MV43N
22144Q1 2124
RTM360-107R
9
3
7
1
8
C
F
RTM
6
8
0
-2
5
5
R
KB_MS
USB
COM1
COM2 PRT
AUDIO_GAME1
CD 1
CD2
D
D
R
2
D
D
R
1
IDE1
IDE2
FDCCN5
RG82 8 45
QC22 ES
PCI1
AG
P
CNR1
PCI1
PCI2
J
P 2
SIR1
J12
J
P 1
A 1
J
P 1
B 1
J
3
D
J2 /J3
J
3
CJ
3
BJ
3
AJ
2
DJ
2
CJ
2
BJ
2
A
J
1
6
JBAT1
11
1
1
SPK1
P A N EL
1
USB2
1
1
U S B 1
1
2
W
O
L1
W
O
M
1
J
P 1
IT8705F
0232-FXS
Mf5920
CR2032
JAPAN STD
LITHIUM BATTERY
K T S
A
T
X
P
WR
C
N
7
1
PANEL2
1
2SYSTEM_FAN
C P
U_ F A
N
Two PCI Slots
One AGP 4x Slot
One CNR Slot
Extended four USB Connectors
header-USB1/ USB2
Keyboard Power On- JP2
Wake on LAN-WOL1
Speaker Connector-SPK1
System FAN
Wake on Modem-WOM1
USB & LAN(MV43N only)
Connectors
Parallel Connector
VIA6103 Phy(MV43N only)
LAN LED Indicator- J16
Serial Port
Connector (COM1)
VGA Connector
Panel1 Connector
Panel2 Connector
Serial infrared port-SIR1
Line-Out/Line-In/Mic-In/
Game/MIDI Connectors
Onboard Audio
Connectors- CD1/CD2
PS/2 Keyboard and
PS/2 Mouse Connectors
CPU Clock -
JP1A1/ JP1B1
CPU FAN
ATX Power Connector
Clear CMOS - JBAT1
Sleep Switch-J12
T wo
E-IDE
C on nec
to r
s
VIA
82 35
C hipset
Floppy Connector
T wo
16 8 p in
SDR
DI MM
Slo ts
DRA M
V o lta
ge-JP 1
T wo
1 8 4 p in
DDR
DIMM
Slot s
DD R/SDR
DRA M
T yp e
Selec
tor
-J 2A / B/C /D
J3 A/B/ C/D /
Socket 478 VIA 8751 Chipset

- 12 -
Step 1
CPU Installation:
This mainboard supports Intel Pentium 4, Socket 478 series CPU. Please
follow the step as below to finish CPU installation.
Be careful of CPU orientation when you plug it into CPU socket.
1. Pull up the CPU socket lever and up to 90-degree angle.
2. Locate Pin 1 in the socket and look for a black dot or cut edge on the
CPU upper interface. Match Pin 1 and cut edge, then insert the CPU
into the Socket.
CPU pin 1 and cut edge
CPU socket lever up to
90 degree

- 13 -
3. Press down the CPU socket lever and finish CPU installation.
Note: If you do not match the CPU socket Pin 1 and CPU cut edge
well, it may damage the CPU.
4. The Intel Pentium 4 /Celeron processor requires a set of heatsink/fan to en
sure proper cooling of the processor. If heatsink/fan have not been already
bundled with your CPU, you must purchase the heatsink/fan separately and
have it installed. Plug the cable through the heatsink/fan in the CPU fan
power connector located nearby. Note that there are several types of CPU
fan connectors. Normally, if your mainboard supports the hard ware moni
toring function, a 3-pin fan power connector should allow your system to
detect the CPU fan's speed. The CPU fan can also run with a 2-pin fan
power connector, however, detection of CPU fan's speed is not supported.
Another type of CPU fan may feature a large 4-pin fan power connector,
which does not support CPU fan's speed detection and must be directly
connected to the system's power supply unit.

- 14 -
Step 2.
Set Jumpers
The default jumper settings have been set for the common usage standard of
this mainboard. Therefore, you do not need to reset the jumpers unless you
require special adjustments as any of the following cases:
1. Clear CMOS
2. CPU Clock Setting
3. DRAM Type and Voltage Setting
4. Keyboard power on Setting
For first-time DIY system builders, we recommend that you do not change the
default jumper settings if you are not totally familiar with the mainboard
configuration procedures. The factory-set default settings are tuned for opti-
mum system performance. For the advanced users who wish to customize
their system, section 3.2 Jumper Settings will provide detailed information
on how to configure your mainboard manually.
Step 3
Install DDR or SDR SDRAM System Memory
To insert memory module(s) in any one or two DIMM slot(s). Please note that
modules are directional and will not go in the DIMM slots unless properly
oriented. After the module is fully inserted into the DIMM slots, lift the clips
of both sides of the DIMM slot to lock the module in place.
SDR SDRAM DDR SDRAM

- 15 -
Step 4
Install Internal Peripherals in System Case
Before you install and connect the mainboard into your system case, we
recommend that you first assemble all the internal peripheral devices into the
computer housing, including but not limited to the hard disk drive (IDE/
HDD), floppy disk drive (FDD), CD-ROM drive, and ATX power supply
unit. This will greatly facilitate in making the connections to the
mainboard described below.
To install IDE & FDD drives, follow this procedure:
1. Set the required jumpers on each device according to the instructions
provided by the manufacturer. (IDE devices, HDD, and CD-ROM, have
to set jumpers to Master or Slave mode depending on whether you in
stall more than one device of each kind.)
2. Connect IDE cable and FDD cable on the back-panel of the internal
peripheral devices to the corresponding headers on board. Note that
the cable should be oriented with its colored stripe (usually in red or
magenta) connected to pin#1 both on the mainboard IDE or FDD
connector and on the device as well.
3. Connect an available power cable from your system power supply unit
to the back-panel of each peripheral device. Note that the power cable
is directional and cannot fit in if not properly positioned.

- 16 -
Step 5
Mount the Mainboard on the Computer Chassis
1. You may find that there are a lot of different mounting hole positions
both on your computer chassis and on the mainboard. To choose
correct mounting holes, the key point is to keep the back-panel of the
mainboard in a close fit with your system case, as shown below.
2. After deciding on the proper mounting holes, position the studs be
tween the frame of the chassis and the mainboard. The studs are used
to fix the mainboard and to keep a certain distance between the system
chassis and the mainboard, in order to avoid any electrical shorts between
the board and the metal frame of the chassis. (If your computer case is
already equipped with mounting studs, you will need to tighten screws to
attach the mainboard.)
Note: In most computer housings, you will be able to find 4 or more
attachment points to install mounting studs and then fix the
mainboard. If there arent enough matching holes, then make sure
to install at least 4 mounting studs to ensure proper attachment of
the mainboard.

- 17 -
Step 6
Connect Front Panel Switches/LEDs/USB
You can find there are several different cables already existing in the system
case and originating from the computer's front-panel devices (HDD LED,
Power LED, Reset Switch, Audio Line-out, Microphone-in, or USB devices
etc.) These cables serve to connect the front-panel switches, LEDs, and USB
connectors to the mainboard's front-panel connectors group , as shown
below.
PANEL 1
1. MIC IN
2. GND
3. VCC MIC
4. +5V Audio
5. Line Out(R)
6. Line Out(R)
7. NC
8. Empty
9. Line Out(L)
10. Line Out(L)
PANEL 2
11.HDD_LED(HD_LED)
12. Green LED (SP_LED)
13.Reset Switch(RST)
14.Power Switch (PW_BN)
15.Extend USB headers(USB1/USB2)
12
3
4
56
7
8
9
10
PANEL 1
USB port 3
USB port 4
USB port 6
USB 1
USB 2
USB port 5
15
1
1
SP_LED
HD_LED
+
-
RST
PW-BN
PANEL2
1
2
MIC In
Line Out(R)
Line Out(L)
(Pins 1,2)
(Pins 5,6)
(Pins 9,10)
PANEL1
USB2
1
2
USB1
1
2
1
HD_LED
SP_LED
RST
PW_BN
14
12
11 13
PANEL 2

- 18 -
Step 7
Connect IDE and Floppy Disk Drives
1. IDE cable connector
2. Floppy cable connector
IDE1
IDE2
1
11
1
FDC

- 19 -
CN5
CD1
1
CD2
Step 8
Connect Other Internal Peripherals
1. CD-IN connectors
Step 9
Connect the Power Supply
1. System power connector