Shuttle Spacewalker MV25 User manual

MV25/MV25N
FC-PGA/FC -PGA2 Celeron and
FC-PGA/FC -PGA2 Pentium III
Processor Based Main Board
User's Manual

Shuttle® SpacewalkerTM MV25/MV25N
Socket370
FC-PGA/FC-PGA2 Celeron and
FC-PGA/FC-PGA2 Pentium III processor
based SDR Mainboard
Manual Version 1.0
Copyright
Copyright© 2001 by Shuttle® Inc. All Rights Reserved.
No part of this publication may be reproduced, transcribed, stored in a retrieval system, trans-
lated into any language, or transmitted in any form or by any means, electronic,
mechanical,magnetic,optical,chemical,photocopying,manual,orotherwise,without
priorwrittenpermission from Shuttle®
Inc.
Disclaimer
Shuttle®Inc. shall not be liable for any incidental or consequential damages resulting from the
performance or use of this product.
Thiscompany makes no representationsor warranties regarding thecontents of this manual.
Informationin this manual has been carefully checkedfor reliability; however, noguarantee is
given as to the correctness of the contents. In the interest of continued product improvement,
this company reserves the right to revise the manual or include changes in the specifications of
the product described within it at any time without notice and without obligation to notify any
person of such revision or changes. The information contained in this manual is provided for
generaluseby the customers.
Trademarks
Spacewalkerisa registered trademark of Shuttle Inc.
VIA isaregisteredtrademarkofVIACorporation.
IntelandPentiumarereqisteredtrademarksof Intel Corporation.
PS/2isa registered trademark of IBM Corporation.
AWARDisaregisteredtrademarkofAwardSoftwareInc.
MicrosoftandWindows are registered trademarks of Microsoft Corporation.
General Notice: Other brand and product names used herein are for identification purposes
only and may be trademarks of their respective owners.
M478

- 1 -
WHAT IN THE MANUAL.........................................................................5
Quick Reference ................................................................................................5
About This Manual ............................................................................................ 5
1 INTRODUCTION ..................................................................................6
1.1 TO DIFFERENT USERS............................................................................... 6
First-Time DIY System Builder.................................................................6
Experienced DIY User..............................................................................6
System Integrator ....................................................................................6
1.2 ITEM CHECKLIST ........................................................................................7
2 FEATURES...........................................................................................9
2.1 SPECIFICATIONS......................................................................................... 9
3 HARDWARE INSTALLATION ............................................................12
3.1 STEP-BY-STEP INSTALLATION................................................................12
STEP 1 Install the CPU ..........................................................................13
STEP 2 Set Jumpers .............................................................................14
STEP 3 Install SDR SDRAM System Memory .......................................14
STEP 4 Install Internal Peripherals in System Case...............................14
STEP 5 Mount the Mainboard on the Computer Chassis .......................15
STEP6 Connect Front-panel Switches/LEDs/Speaker/USB ..................16
STEP 7 Connect IDE & Floppy Disk Drives............................................17
STEP 8 Connect Other Internal Peripherals...........................................17
STEP 9 Connect Power Supply..............................................................18
STEP 10 Install Add-on Cards in Expansion Slots..................................18
STEP 11 Connect External Peripherals to Back-panel ...........................19
STEP 12 First Time System Boot Up .....................................................20
STEP 13 Install Driver & Software Components ....................................21
TABLE OF CONTENTS

- 2 -
3.2 JUMPER SETTINGS ..................................................................................22
JUMPER& CONNECTOR GUIDE .........................................................23
Jumpers
USB1/2 Power-On Setting (JP5)............................................................26
LANEnabale/Disable Setting (J10) ........................................................26
Clear CMOS (J1)...................................................................................27
Back-Panel Connectors
PS/2 Keyboard & PS/2 Mouse Connectors............................................28
LANPortConnector ...............................................................................28
USBPortConnectors.............................................................................28
COM1Connector ...................................................................................28
VGAConnector......................................................................................29
Parallel Port Connector ..........................................................................29
Line-Out .................................................................................................29
Line-In ....................................................................................................29
Mic-In.....................................................................................................29
MIDI/GAME Port....................................................................................30
Front-Panel Connectors
GreenLED Connector(GreenLED) ........................................................31
HDDLED Connector(HDDLED) ............................................................31
ATX Power On/Off Switch Connector (PWRON) ...................................32
Hardware Reset Connector (Reset).......................................................32
Power LED Connector (PWRLED).........................................................33
EPMI Connector (EPMI) ........................................................................33
Speaker Connector (Speaker) ...............................................................33
ExtendedUSB Header(USB1)...............................................................34

- 3 -
Internal Peripherals Connectors
Enhanced IDE Ports and Floppy Connectors .........................................35
Other Connectors
ATX Power Supply Connector (JWR1)...................................................36
CoolingFAN Connectors forCPUFAN(FAN1) and
ChassisFAN(FAN2/3) ...........................................................................36
IR Connector (J5) ..................................................................................37
COM2 Connector (J8)............................................................................38
Front-Panel Microphone and Line-Out Header (J11) ..............................38
Audio CD-IN Header (SJP1) (Black) ......................................................39
Audio AUX-IN Header (SJP2) (White) .................................................... 39
Audio TAD-IO Header (SJP3) (Green)...................................................39
Wake On LAN Connector (WOL) ...........................................................40
3.3 SYSTEM MEMORY CONFIGURATION......................................................41
Install Memory .......................................................................................41
Upgrade Memory ...................................................................................41
4 SOFTWARE UTILITY .........................................................................42
4.1 Mainboard CD Overview ..........................................................................42
4.2 Install Mainboard Software......................................................................43
Install VIA 4 in 1, AGP, and Audio Device Driver ....................................44
4.3 Install VIA Hardware Monitor and LAN drivers.......................................45
4.4 Install LAN Software.................................................................................46
Install WIN98 LAN driver ........................................................................ 46
InstallWINNT LAN driver........................................................................49
4.5 View the User's Manual ...........................................................................51

- 4 -
5 BIOS SETUP ......................................................................................52
5.1 ENTER THE BIOS ......................................................................................52
5.2 THE MAIN MENU .......................................................................................53
STANDARD CMOSFEATURES.................................................................55
ADVANCEDBIOS FEATURES...................................................................58
ADVANCEDCHIPSETFEATURES ............................................................62
INTEGRATEDPERIPHERALS ...................................................................66
POWERMANAGEMENT SETUP...............................................................70
PNP/PCICONFIGURATION.......................................................................75
PCHEALTH STATUS .................................................................................78
FREQUENCY/VOLTAGE CONTROL .........................................................79
LOADFAIL-SAFEDEFAULTS....................................................................80
LOAD OPTIMIZED DEFAULTS..................................................................80
SETSUPERVISOR PASSWORD...............................................................81
SETUSER PASSWORD ............................................................................81
SAVE & EXIT SETUP.................................................................................82
EXITWITHOUT SAVING ...........................................................................82

- 5 -
Quick Reference
Hardware Installation >> Step-by-Step................................................ Page 12
Jumper Settings >> A Closer Look ...................................................... Page 22
Software Utility >> How to Install......................................................... Page 42
BIOS Setup >> How to Configure ........................................................ Page 52
About This Manual
For First-Time DIY System Builder......................................................... Page 6
For Experienced DIY User ...................................................................... Page 6
For System Integrator ............................................................................. Page 6
WHAT’S IN THE MANUAL

- 6 -
1 INTRODUCTION
1.1 To Different Users
First-Time DIY System Builder
Welcome to the DIY world! Building your own computer system is not as
difficult as you may think. To make your first computer DIY experience
successful, right from the start, we ha e designed the Chapter 3 Hardware
Installation section in a step-by-step fashion for all the first-time DIY system
builders. Prior to installation, we also suggest you to read the whole manual
carefully to gain a complete understanding of your new Shuttle MV25/MV25N
mainboard.
Experienced DIY User
Congratulate on your purchase of the Shuttle MV25/MV25N mainboard.
You will find that installing your new Shuttle MV25/MV25N mainboard is
just easy. Bundled with an array of onboard functions, the highly-integrated
MV25/MV25N mainboard pro ides you with a total solution to build the
most stable and reliable system. Refer to sections 3.2 Jumper Settings and
Chapter 4 Software Utility to find out how to get the best out of your new
mainboard. Chapter 5 BI S Setup also contains the rele ant information on
how to tune up your system to achie e higher performance.
SystemIntegrator
You ha e wisely chosen Shuttle MV25/MV25N to construct your system.
Shuttle MV25/MV25N incorporates all the state-of-the-art technology of the
PLE133T chipset from VIA. It integrates the most ad anced functions you
can find to date in a compact Micro ATX board.

- 7 -
1.2 Item Checklist
Check all items with you MV25/MV25N mainboard to make sure nothing
is missing. The complete package should include:
One piece of Shuttle MV25/MV25N Mainboard
One piece of ATA100/66/33 Ribbon Cable
One piece of Floppy Ribbon Cable
One piece of 9-pin Ribbon Cable
One piece of twin ports USB Cable (optional)
KB MS 1
CD _ I N
CO M 2
US B1 LAN 1
IS A1
J7
13C0 06 5 01 31CD TAI W VT82C686B
AUX_IN
1
1
SJP2
1
11
1
SJP1
USB13
GreenLE EPMI S peaker
Reset
+PWRL E D
J3
FDD1
1
1
1
IDE 2 IDE 1DIMM1 DIMM2
FAN2
FAN1
J10
INDONESIA
3V
CR2032
Panason
JWR1
C
132ETAIWA
18034T3
RTL8100B
4MC
VT1611A
TAD _ I O
SJP3
FAN3
PCI 3
PCI 2 PCI 1
IR
1
J5
WOL
J11
FDC
J1 1
+HDDLED
PWRON
U
11
1
1
AUDI
VGA PRT
COM1
J6J2
ATXPW
JP5
1
One I/O back-Panel Shielding

- 8 -
MV25/MV25N User'ss Manual
One piece of Bundled CD-ROM with containing:
ØMV25/MV25N user's manual on PDF format
ØVIA 4-IN-1 dri er
ØVIA AGP dri er
ØVIA Audio dri er
ØVIA Hardware Monitor dri er
ØLAN dri er(MV25N Only)
ØAward Flashing Utility

- 9 -
MV25/MV25N mainboard is carefully designed for the demanding PC user who wants
high performance and maximum intelligent features in a compact package.
2.1 Specifications


CPU Support
Intel FC-PGA Celeron processors with 66/100 MHz FSB.
Intel FC-PGA2 Celeron processors with 100 MHz FSB.
Intel FC-PGA Pentium III processors with 100/133 MHz FSB.
Intel FC-PGA2 Pentium III processors with 133 MHz FSB.
VIA C3 processors with 100/133 MHz FSB.


Chipset
Features VIA PLE133T, VT8601T N.B. / VT82C686B S.B. Chipset.


AC'97 Link for Audio and Telephony CODEC
AC'97 2.1 compliant.
Spread independent PCI functions for Audio and Modem.


Integrated Graphics Controller
Enhancement 3D graphics isual and texturing features.
Integrated 24-bit 230MHz RAMDAC.
Supports VESA DDC2B.
Up to 1600 x 1200 in 8-bit color at 85 Hz refresh in 2D graphics.


On Board LAN Controller
Support 10Mb/s and 100Mb/s operation.


Versatile Memory Support
Two 168-pin DIMMM slots to support up to 1GB of PC100 or PC133
compliant SDR SDRAM module.


PCI and ISA Expansion Slots
Pro ides three 32-bit PCI slots and one 16-bit ISA slot.


AMR Expansion Slot
2 FEATURES

- 10 -
Pro ides one AMR (Audio and Modem Riser) slot.


I/O Interface
Pro ides a ariety of I/O interfaces:
Ø1 Floppy interface for 3.5-inch FDD with 720KB, 1.44MB, or 2.88MB
format or for 5.25-inch FDD with 360K or 1.2MB format.
Ø1 PS/2 mouse connector.
Ø1 PS/2 Keyboard connector.
Ø1 RJ45 LAN connector. (MV25N Only)
Ø1 DB15 VGA connector.
Ø2 DB9 Serial connector 16550 UART compatible.
Ø1 Infrared communication port.
(Serial port COM2 can also be redirected to an external IrDA Adapter
for wireless connection.)
Ø1 DB25 Parallel port supporting Standard Parallel Port (SPP),
Enhanced Parallel Port (EPP), and Extended Capabilities Port (ECP)
data transmission schemes.
Ø1 Line-Out port.
Ø1 Line-In port.
Ø1 Mic-In port.
Ø1 MIDI/GAME port.


4 USB Supported Onboard
Ø2 USB connectors on back-panel and one sets of dual USB ports headers
on mid-board.


PCI Bus Master IDE Controller Onboard
Two UltraDMA 100/66/33 Bus Master Dual-channel IDE ports pro ide sup-
port to a maximum of four IDE de ices (one Master and one Sla e per chan-
nel). The IDE Bus implements the data transfer speed up to 100/66/33 MB/
sec and also supports Enhanced PIO Modes.
80-pin Cable Backward Compatible Legacy ATAPI De ices, ATAPI IDE CD-
ROM, CD-R, CD-RW, and LS-120 Supports.


ATX Power Supply Connector
ATX power supply unit can be connected to the onboard 20-pin ATX
power connector, supporting Suspend and Soft-On/Off by dual-function

- 11 -
power button.


Advanced Configuration and Power Interface
Features four power sa ing modes: Snoop, Suspend to RAM, Suspend to
Disk, and Soft-Off. ACPI pro ides more efficient Energy Sa ings Features
controlled by your operating system that supports OS Direct Power Man-
agement (OSPM) functionality.


SystemBIOS
Pro ides licensed Award BIOS V6.0 PG on 2Mb Flash EEPROM and
supports Green PC, Desktop Management Interface (DMI).


ATX Form Factor
System board conforms to the Micor ATX specification.
Board dimension: 244mm*200mm.


Advanced Features
ØDual Function Power Button - The system can be in one of two states;
one is Suspend mode and the other is Soft-Off mode. Pushing the
power button for less than 4 seconds places the system into Suspend
mode. When the power button is pressed for longer than 4 seconds,
the system enters the Soft-Off mode.
ØModem Ring Power- n - The system can be powered on automatically
by the acti ation of modem ring.


Intelligent Features
ØVoltage Monitoring - Monitors arious oltages of key elements, such as
the CPU, and other critical system oltage le els to ensure stable current
passing through mainboard components. System oltages include Vcore
on CPU, and +2.5V, +3.3V, +5V, +12V on system etc.
ØFan Status Monitoring - To pre ent CPU from o erheating, the CPU fan
is monitored for RPM and failure. (CPU Cooling FAN with RPM sensor
is required.)
ØTemperature Monitoring - This item allows users to make sure whether
the CPU or system runs in a suitable temperature.

- 12 -
3HARDWAREINSTALLATION
Before removing or installing any of these devices including CPU, DIMMs, Add- n
Cards, Cables, please make sure to unplug the onboard power connector.
This section outlines how to install and configure your MV25/MV25N mainboard.
Refer to the following mainboard layout to help you identify arious jumpers, connec-
tors, slots, and ports. Then follow these steps to guide you through a quick and cor-
rect installation of your system.
3.1 Step-by-Step Installation
Accessories Of MV25/MV25N
KBMS1
CD_ I
COM2
USB1 L
ISA1
J7
13C006500
0131CD TAIW AN
VT82C686B
1
11
1
GreenLE
EPMI Speaker
Reset
+PWRLED
J3
FDD1
1
1
1
ID E2 ID E1DIMM1 DIMM2
FAN2
FAN1
J10
INDONESIA
3V
CR2032
Panasonic
JW R1
C
132E TAIW AN
180 34T3
RT L8100B
4MC
VT1611A
TAD_ IO
SJP3
FAN3
1
WOL
J11
FDC
J1 1
+HDDL
PWRO N
VGA PRT
COM1
J6J2
JP5
1
PS2 Keyboard
PS/2 Mouse Connectors
USB1/USB2 & LAN
Connector
Socket 37
Seria Port Connect o
(COM2)
VGA Port Connecto
Seria Port Connector
(COM1)
Para e Connect o
VIA 8601T Chips e
On Board Audio CODEC
On Board L AN Contro er ( MV25N On y
On Board Audio Header-
SJP1,SJP2,SJP3
Front-Pane Audio Header-
J11
Three PCI S ot
One ISA S ot
ATX Power Connect o FAN1
Line-In/Line-Out/Mic-In
Gam e/M ID I Conn ectors
F oppy Connec t o Two DIMM s ots
Two IDE Connector
FAN2
Front-Pone Header - J3
C ear CMOS - J1
Extended USB Header-USB3/4
IR - J5Header
FAN3
Wake on LA
AMR S ot
LAN Enab e/Disab e Functi o
Programmab e 2Mb F ash EEPROM
USB Power-On Setting-JP5

- 13 -
Step 1
Install the CPU:
1. Locate the CPU ZIF (Zero Insertion Force) socket on the upper-right
sector of your mainboard (between the back-panel connectors and the
DIMM memory slots).
2. Pull the CPU ZIF socket le er slightly sideways away from the socket
to unlock the le er, and then bring it to an upwardly ertical position.
3. Place your FC-PGA/FC-PGA2 370 processor in the ZIF socket. Note that
the CPU edges ha e been purposely designed non-symmetrically to pre
ent from inserting the processor in the wrong direction. The following
diagram demonstrates the correct placement of the CPU in the ZIF socket.
You can see that the two blunt-edged corners should face towards the
socket-le er.
4. Slightly push the FC-PGA/FC-PGA2 370 processor into the socket without
applying excessi e force while making sure there is no gap between CPU
and socket. Then lower the socket-le er all the way down to its horizontal
position and lock it to secure the CPU in place.
5. The FC-PGA/FC-PGA2 370 processor requires a set of heatsink/fan to en
sure proper cooling of the processor. If heatsink/fan ha e not been already
mounted on your CPU, you must purchase the heatsink/fan separately
and ha e it installed. Plug the cable through the heatsink/fan in the CPU
fan power connector located nearby. Note that there are se eral types of
CPU fan connectors. Normally, if your mainboard supports the hardware
monitoring function, a 3-pin fan power connector should allow your system
to detect the CPU fan's speed . The CPU fan can also run with a 2-pin fan
power connector, howe er, detection of CPU fan's speed is not supported.
Another type of CPU fan may feature a large 4-pin fan power connector,
which does not support CPU fan's speed detection and must be directly
connected to the system's power supply unit. Please refer to the follow
ing diagram.
2/)!%
Lever BlankBlank
Notch
2/)!%
R
m
c
I
[
99
Pentium
RB80 52 6 PY
Q94 4A0 36 - 039
MA LA Y
®
Notch
2/)!%
RK80526
D101 F207S
I N T EL
[
0 A4
V105502C-0343 QEJ0ES

- 14 -
Step 2.
Set Jumpers
This mainboard is jumperless! The default jumper settings ha e been set
for the common usage standard of this mainboard. Therefore, you do not
need to reset the jumpers unless you require special adjustments as in any
of the following cases:
1. Clear CMOS
2. Enable/Disable LAN Function(MV25N Only)
3. Enable/Disable USB Power On Function
Please refer to section 3.2 Jumper Settings for the detail information.
Step 3.
Install SDR SDRAM System Memory
To install memory, insert SDR SDRAM memory module(s) in DIMM
slot(s). Note that SDR SDRAM modules are directional and will not go in
the DIMM slots unless properly oriented. After the module is fully in-
serted into the DIMM slots, lift the clips of both sides of the DIMM slot to
lock the module in place.
Step 4
Install Internal Peripherals in System Case
Before you install and connect the mainboard into your system case, we
recommend that you first assemble all the internal peripheral de ices into
the computer housing, including but not limited to the hard disk dri e
(IDE/HDD), floppy disk dri e (FDD), CD-ROM dri e, and ATX power
supply unit.

- 15 -
Step 5
Mount the Mainboard on the Computer Chassis
1. You may find that there are a lot of different mounting hole positions
both on your computer chassis and on the mainboard. To choose a
correct mounting hole, the key point is to keep the back-panel of the
mainboard in a close fit with your system case, as shown below.
2. After deciding on the proper mounting holes, position the studs be
tween the frame of chassis and the mainboard. The studs are used to
fix the mainboard and to keep a certain distance between the system
chassis and the mainboard, in order to a oid any electrical short be
tween the board and the metal frame of chassis. (If your computer case
is already equipped with mounting studs, you will need to tighten
screws to attach the mainboard.)
Note: In most computer housings, you will be able to find 4 or more
attachment points to install mounting studs and fix the mainboard.
If there aren't enough matching holes, then make sure to install at
least 4 mounting studs to ensure proper attachment of the
mainboard.

- 16 -
Step 6
Connect Front-Panel Switches/LEDs/Speaker/USB connectors
You can find there are se eral different cables already existing in the
system case and originating from the computer's front-panel de ices
(HDD LED, Green LED, Reset Switch, PC Speaker, or USB de ices etc.)
These cables ser e to connect the front-panel switches, LEDs, and USB
connectors to the mainboard's front-panel connectors group (J3 and
USB1), as shown below.
1. Green_LED (GLED)
2. HDD_LED (HDLED)
3. ATX Soft Power On/Off (PWRON)
4. Hardware Reset Swith (Reset)
5. Power_LED(PWRLED)
6. System Management Interface Button(EPMI)
7. PC Speaker(Speaker)
8. Extended USB Header
USB1 3& 4
1
GreenLE
EPMI Speaker
Reset
+PWRLED
J3
+HDDLED
PWRON
1
J3
Speaker
Reset
HDDLED
2
6
7
5
GreenLED
PWRLED
PWRON
EPMI
1
4
3
8
USB port 3
USB port 4
KEY GND
+
USBP3- USBP3 +5V
+5V
USBP4-
USBP4+
GND GND
10 1 2

- 17 -
Step 7
Connect IDE & Floppy Disk Drives
1. IDE cable connector
2. FDD cable connector
Step 8
Connect Other Internal Peripherals
1. CD_IN, TAD_IO AUX_IN, and Front-Panel AUDIO connectors
2. IR connector
1
1
IDE2 ID E1
FDD1
1
FDC
CD_IN
AUX _IN
SJP2
SJP1
TAD_ IO
SJP3
J11
1
IR
1
J5

- 18 -
Step 9
Connect Power Supply
1. System power connector
Step 10
Install Add-on Cards in Expansion Slots
1. PCI Card
2. ISA Card
3. Audio and Modem Riser(AMR) Card
JWR1