Siemens FC361 Series User manual

FC361-xx, FC362-xx
Fire control panel
Technical Manual
A6V10421795_en--_k
Smart Infrastructure
2021-04-28

Imprint
2 | 151
A6V10421795_en--_k
Imprint
Technical specifications and availability subject to change without notice.
Transmittal, reproduction, dissemination and/or editing of this document as well as
utilization of its contents and communication thereof to others without express
authorization are prohibited. Offenders will be held liable for payment of damages.
All rights created by patent grant or registration of a utility model or design patent
are reserved.
Issued by:
Siemens Switzerland Ltd.
Smart Infrastructure
Global Headquarters
Theilerstrasse 1a
CH-6300 Zug
Tel. [phone]
www.siemens.com/buildingtechnologies
Edition: 2021-04-28
Document ID: A6V10421795_en--_k
© Siemens Switzerland Ltd, 2021

A6V10421795_en--_k
3 | 151
Table of Contents
1 About this document ....................................................................................7
1.1 Applicable documents.....................................................................................9
1.2 Download center .............................................................................................9
1.3 Abbreviations.................................................................................................10
1.4 History of changes.........................................................................................10
2 Safety............................................................................................................13
2.1 Intended use..................................................................................................13
2.2 Safety instructions.........................................................................................13
2.3 Safety regulations for the method of operation.............................................14
2.4 Release notes ...............................................................................................16
2.5 Cyber security disclaimer..............................................................................17
3 Notes ............................................................................................................18
3.1 Open Source Software (OSS).......................................................................18
4 System description.....................................................................................19
4.1 System overview...........................................................................................19
4.2 Features ........................................................................................................20
4.3 Panel types....................................................................................................21
4.4 Technical data...............................................................................................22
4.4.1 General data..................................................................................22
4.4.2 Electrical data ................................................................................23
4.4.3 Mechanical data.............................................................................24
4.4.4 Environmental conditions...............................................................24
4.5 Structure........................................................................................................25
5 Options with requirements.........................................................................26
6 Installation ...................................................................................................27
6.1 Instruction......................................................................................................27
6.2 Surface mounting..........................................................................................29
6.3 Power supply - mains voltage.......................................................................30
6.4 Battery...........................................................................................................31
6.5 Connection overview.....................................................................................32
6.6 C-NET detector line.......................................................................................33
6.6.1 Connectable C-NET devices .........................................................34
6.6.2 C-NET topology .............................................................................37
6.6.3 Wiring on C-NET devices ..............................................................38
6.7 Sounder lines ................................................................................................40
6.8 Inputs/outputs................................................................................................41
6.9 Relay .............................................................................................................43
6.10 Terminals and switches.................................................................................44
6.11 Accessories...................................................................................................46
6.11.1 Key switch (FCA3601-Z1)/Key switch (Nordic) (FCA3603-Z1) .....46
6.11.2 Evacuation module (FTO3601-H1) [NL]........................................47
6.11.3 LED indicator (32 zones) (FTO3603-Z1).......................................48
6.11.4 Output card (4M) (FCA3602-Z1)....................................................49

4 | 151
A6V10421795_en--_k
6.11.5 RS232/RS485 module (Optional) ..................................................52
6.12 Spare parts....................................................................................................56
6.12.1 Mainboards FCM3601-Z1 and FCM3601-Z2 ................................56
6.12.2 Door incl. PMI FHD3601-Z1 ..........................................................58
7 Function overview.......................................................................................59
7.1 Access levels.................................................................................................59
7.2 LED indicators...............................................................................................60
7.3 Keys...............................................................................................................61
7.4 LCD ...............................................................................................................63
7.5 Operating menu overview .............................................................................64
7.6 Event views ...................................................................................................66
7.6.1 Sample of Alarm view....................................................................66
7.6.2 Sample of Fault view......................................................................67
7.6.3 Sample of Isolation view................................................................67
8 Operation .....................................................................................................68
8.1 Alarm procedure in unmanned mode............................................................68
8.2 Alarm procedure in manned mode................................................................70
8.3 Procedure in case of fault..............................................................................71
8.4 Operations under access level 1...................................................................72
8.4.1 Viewing system status ...................................................................72
8.4.2 Logging into a higher access level.................................................73
8.4.3 Querying alarm counter .................................................................74
8.4.4 About..............................................................................................74
8.5 Operations under access level 2...................................................................75
8.5.1 Isolation..........................................................................................75
8.5.2 Test................................................................................................77
8.5.3 Viewing event memories................................................................81
8.5.4 Logging out of the current access level .........................................85
8.6 Operations under access level 3...................................................................86
8.6.1 Deleting test logs ...........................................................................86
9 Engineering..................................................................................................87
9.1 Setting date & time........................................................................................87
9.2 Editing zone and device name......................................................................88
9.2.1 On-screen keyboard ......................................................................88
9.2.2 Entering text...................................................................................88
9.3 Changing password.......................................................................................89
9.4 Detector line ..................................................................................................90
9.4.1 Restarting.......................................................................................90
9.4.2 Powering off...................................................................................90
9.4.3 Maintenance ..................................................................................91
9.4.4 Auto configuration..........................................................................94
9.4.5 Viewing devices and type A dependencies ...................................95
9.4.6 Locating devices............................................................................97
9.4.7 Resetting detection module .........................................................100
9.4.8 Calibrating an FDnet/C-NET detector line...................................100
9.5 Calibrating output card (4M)........................................................................105
9.6 Resetting alarm counter..............................................................................106

A6V10421795_en--_k
5 | 151
9.7 Restoring factory settings............................................................................106
9.8 Configuration tools ......................................................................................107
9.8.1 Connecting a PC to the panel......................................................107
10 Commissioning .........................................................................................109
10.1 Installing and checking a detector line........................................................109
10.2 Installing panel ............................................................................................110
10.3 Starting up the panel...................................................................................110
10.4 General commissioning steps.....................................................................110
10.4.1 Configuring detector line automatically........................................110
10.4.2 Configuring the system manually.................................................111
10.4.3 Function test ................................................................................113
10.4.4 Completing work..........................................................................113
10.5 Setting Windows firewall .............................................................................114
10.6 Updating firmware.......................................................................................116
10.7 Backing up configurations to the PC...........................................................117
10.8 Applying configurations to the panel...........................................................117
10.9 Backing up event logs to the PC.................................................................118
10.10 Backing up compensation values to the PC ...............................................118
10.11 Backing up test reports to the PC ...............................................................118
10.12 Factory reset ...............................................................................................119
10.13 Adding output card (4M)..............................................................................119
11 Maintenance...............................................................................................120
11.1 General........................................................................................................120
11.2 Preparatory work.........................................................................................120
11.3 Function test................................................................................................121
11.4 Device test...................................................................................................122
11.5 Calibrating lines...........................................................................................123
11.6 Completion of work......................................................................................123
12 Troubleshooting........................................................................................124
12.1 Fault message indication ............................................................................124
12.2 Panel ...........................................................................................................124
12.3 Accessories.................................................................................................125
12.4 Recovering short fault of a detector line .....................................................125
13 Components and spare parts ..................................................................126
14 Environmental protection and disposal .................................................128
15 Appendix A: Alarm Verification Concept (AVC).....................................129
16 Appendix B: Delayed Alarm Reset (DAR)...............................................131
17 Appendix C: Door holder function ..........................................................134
18 Appendix D: Voice alarm device synchronization.................................136
19 Appendix E: Device type list....................................................................138
20 Appendix F: Flash file behaviors.............................................................140
21 Appendix G: Default settings for panel/devices ....................................141
22 Appendix H: Switch mains to AC 115 V..................................................146
Glossary ...............................................................................................................147
Index ....................................................................................................................149

About this document
Applicable documents
1
A6V10421795_en--_k
7 | 151
1 About this document
●Specialist electrical engineering knowledge is required for installation.
●Only an expert is permitted to carry out installation work.
Incorrect installation can take safety devices out of operation unbeknown to a
layperson.
Goal and purpose
The information provided in this manual is a summary of the key procedures and
functions required to assemble, install, operate, commission and maintain the
system.
It is intended to provide experienced and qualified personnel a guide on the
required processes.
Scope
The technical manual applies to fire control panel of FC360 series.
Target groups
The information in this document is intended for the following target groups:
Target group
Activity
Qualification
Installation personnel
●Assembles and installs the product
components at the place of
installation.
●Carries out a performance check
following installation.
●Has received specialist training in
the area of building installation
technology or electrical installations.
Commissioning personnel
●Configure the product at the place of
installation according to customer-
specific requirements.
●Check the product operability and
release the product for use by the
operator.
●Searches for and corrects
malfunctions.
●Has obtained suitable specialist
training for the function and for the
products.
●Has attended the training courses
for commissioning personnel.
Operating personnel
●Carries out procedures to correctly
operate the product.
●No particular basic training is
needed.
●Has been instructed by the
commissioning personnel.
Maintenance personnel
●Carries out all maintenance work.
●Checks that the products are in
perfect working order.
●Searches for and corrects
malfunctions.
●Has obtained suitable specialist
training for the function and for the
products.
Document identification
The document ID is structured as follows:
A6Vxxxxxxxx_aaAA_vv
A6Vxxxxxxxx_--AA_vv
A6Vxxxxxxxx_aa--_vv
A6Vxxxxxxxx_----_vv

About this document
Applicable documents
1
8 | 151
A6V10421795_en--_k
ID coding1
Description
A6Vxxxxxxxx
STEP-ID generated by the STEP system
_
Separator
aa
Language abbreviation in accordance with ISO 639-1
AA
Country abbreviation in accordance with ISO-3166-1
--
Multilingual or international
vv
Document version, single or double digit: a, b, …z; aa, ab, …az;
ba, bb, …bz; etc.
1
Some documents have different IDs that are generated by an earlier system.
There are also documents with up-to date ID codes along with additional
features in the designation.
ID code
Examples
ID_languageCOUNTRY_version
-- = multilingual or international
A6V10215123_deDE_a
A6V10215123_en--_a
A6V10315123_----_a
Date format
The date format in the document corresponds to the recommendation of
international standard ISO 8601 (format YYYY-MM-DD).
Reference document and source language
●The source language of this document is English (en).
●The reference version of this document is the international version in English.
The international version is not localized.
The reference document has the following designation:
ID_en--_x
x = version, en = English, -- = international
Conventions for text marking
Markups
Special markups are shown in this document as follows:
⊳
Requirement for a behavior instruction
1.
2.
Behavior instruction with at least two operation sequences
–
Intermediate step of a behavior instruction
⇨
Intermediate result of a behavior instruction
⇨
End result of a behavior instruction
●
Numbered lists and behavior instructions with an operation sequence
[➙X]
Reference to a page number
'Text'
Quotation, reproduced identically
<Key>
Identification of keys
>
In addition to relation symbols and for identification between steps in
a sequence, e.g., 'Menu bar' > 'Help' > 'Help topics'
↑Text
Identification of a glossary entry

About this document
Applicable documents
1
A6V10421795_en--_k
9 | 151
Supplementary information and tips
The 'i' symbol identifies supplementary information and tips for an easier way of
working.
1.1 Applicable documents
The list below is used as a reference for the FC360 fire control panel and as a
supplement to this document.
Document ID
Name
008250
Operation manual FDUL221 line tester
A6V10210416
FS720 Fire Detection System, Commissioning, Maintenance,
Troubleshooting
A6V10419665
Datasheet, Fire control panel FC360
A6V10421797
Operation manual (short), Fire control panel FC360
A6V10878675
Operation manual (short) with EVAC, Fire control panel
FC360
A6V10450595
Operation manual for configuration tools, Fire control panel
FC360
A6V10450593
Mounting instructions, FCM3601-Z1 and FCM3601-Z2
A6V10421792
Mounting instructions, Fire control panel FC360
A6V10431013
Mounting instructions, FCA3601-Z1 / FCA3603-Z1 key switch
A6V10431015
Mounting instructions, FCA3602-Z1 output card (4M)
A6V10893024
Mounting instructions, FHA3602-Z1 semi flush mount bezel
A6V10450591
Mounting instructions, FHD3601-Z1 door incl. PMI
A6V10431009
Mounting instructions, FTO3601-H1 evacuation module (NL)
A6V11777319
Mounting instructions, FTO3603-Z1 LED indicator (32 zones)
A6V10885143
Quantities tool, Fire control panel FC360
A6V10882301
List of compatibility, Fire control panel FC360
A6V12080979
Cybersecurity Guidelines, Fire control panel FC360
1.2 Download center
You can download various types of documents, such as data sheets, installation
instructions, and license texts via the following Internet address:
http://siemens.com/bt/download
1. Enter the document ID in the 'Find by keyword' input box.
2. Contact Siemens if a document is unavailable in
http://siemens.com/bt/download.
You will also find information about search variants and links to mobile
applications (apps) for various systems on the home page.

About this document
Abbreviations
1
10 | 151
A6V10421795_en--_k
1.3 Abbreviations
Abbreviations
Explication
AVC
Alarm Verification Concept
EOL
End of Line
MCP
Manual Call Point
PSU
Power Supply Unit
↑PMI
Person Machine Interface
EVAC
Evacuation
GUI
Graphical User Interface
EMC
Electro Magnetic Compatibility
DMS
Danger Management System
UFP
Universal Fire Protocol
DAR
Delayed Alarm Reset
1.4 History of changes
The reference document's version applies to all languages into which the reference
document is translated.
The first edition of a language version or a country variant may, for example, be
version 'd' instead of 'a' if the reference document is already this version.
The table below shows this document’s history of changes:
Version
Edition date
Brief description
k
2021-04-28
Some minor editorial changes.
j
2021-02-02
Add DAR use case.
Add descriptions of the 'Door holder' function.
Add synchronization descriptions of voice alarm
devices.
i
2020-12-16
Add Chapter 3.
Add RS485 communication parameters in
Chapter 6.11.5.
Change LED indicators (16 zones) to LED
indicators (32 zones) throughout the whole
document.
Add information about FC362-xx to the whole
document.
Remove unsupported functions such as device
deletion and brightness adjustment.
Change terms, e.g., change section to zone.
h
2020-09-03
Add a note to the reset key in chapter 5.10.
g
2016-11-18
Add information on mainboard FCM3601-Z1 and
door incl. PMI FHD3601-Z1 in chapter 5.12 and
chapter 12.
Change default setting of relay 3 in chapters 5.9
and 5.5.

About this document
History of changes
1
A6V10421795_en--_k
11 | 151
Version
Edition date
Brief description
Add ‘Intended use’ sub-chapter in chapter 2.1.
Some minor editorial changes.
f
2016-08-23
Add technical information on output card (4M)
concerning creeping open/short when the output
is configured as 'RT Fault' in chapter 5.11.4.
e
2016-08-18
Add technical information on output card (4M)
concerning creeping open/short in chapter 3.4.2
and 5.11.4.
d
2016-07-22
Completely update the document.
c
2016-04-08
Add RS485/RS232 communication parameters
in chapter 5.11.5.
Change name of ‘FC360 Tool’ to ‘FC360 Panel
Configurator’.
Change name of ‘FC360 Editor’ to ‘FC360
Desktop Editor 2.0’.
Change password of access level 3.1 in chapter
6.1.
Add information of updating firmware of
FT2010/FT2011/FDUL221 in chapter 9.7.
b
2016-02-23
Add sticker information in chapter 5.2.
Add description to quit replace mode in chapter
8.3.4.3.
Add how to adjust brightness in chapter 11.2.
Update information in chapter 3.4.2 and chapter
5.8 about the total output current of configurable
IOs and Aux power output is max. 0.2 A.
Add access level 3.1 in chapter 6.1.
Add action of P2 line overload in chapter 11.2.
Add ‘Shielded cable is required.’ for RS485
application in chapter 5.11.5.
a
2015-06-08
First version
The table below shows the published language versions and country variants with
the corresponding modification index:
Modification index
en_--
de_--
fr_--
it_--
es_--
k
X
X
X
X
X
j
X
-
-
-
-
i
X
-
-
-
-
h
X
X
X
X
X
g
X
X
X
X
X
f
X
-
-
X
-
e
X
-
-
-
-
d
X
-
-
X
-
c
X
-
-
-
-
b
X
-
-
-
-
a
X
-
-
-
-

About this document
History of changes
1
12 | 151
A6V10421795_en--_k
X =
published
- =
no publication with this modification index

Safety
Intended use
2
A6V10421795_en--_k
13 | 151
2 Safety
2.1 Intended use
The panel is intended to be mounted in a building to detect, evaluate and alarm in
the event of fire, together with ↑C-NET ↑detector line.
2.2 Safety instructions
The safety notices must be observed in order to protect people and property.
The safety notices in this document contain the following elements:
●Symbol for danger
●Signal word
●Nature and origin of the danger
●Consequences if the danger occurs
●Measures or prohibitions for danger avoidance
Symbol for danger
This is the symbol for danger. It warns of risks of injury.
Follow all measures identified by this symbol to avoid injury or death.
Additional danger symbols
These symbols indicate general dangers, the type of danger or possible
consequences, measures and prohibitions, examples of which are shown in the
following table:
General danger
Explosive atmosphere
Voltage/electric shock
Laser light
Battery
Heat
Signal word
The signal word classifies the danger as defined in the following table:
Signal word
Danger level
DANGER
DANGER identifies a dangerous situation, which will result
directly in death or serious injury if you do not avoid this
situation.
WARNING
WARNING identifies a dangerous situation, which may
result in death or serious injury if you do not avoid this
situation.
CAUTION
CAUTION identifies a dangerous situation, which could
result in slight to moderately serious injury if you do not
avoid this situation.
NOTICE
NOTICE identifies possible damage to property that may
result from non-observance.

Safety
Safety regulations for the method of operation
2
14 | 151
A6V10421795_en--_k
How risk of injury is presented
Information about the risk of injury is shown as follows:
WARNING
Nature and origin of the danger
Consequences if the danger occurs
●Measures/prohibitions for danger avoidance
How possible damage to property is presented
Information about possible damage to property is shown as follows:
NOTICE
Nature and origin of the danger
Consequences if the danger occurs
●Measures/prohibitions for danger avoidance
2.3 Safety regulations for the method of operation
National standards, regulations and legislation
Siemens products are developed and produced in compliance with the relevant
European and international safety standards. Should additional national or local
safety standards or legislation concerning the planning, assembly, installation,
operation or disposal of the product apply at the place of operation, then these
must also be taken into account together with the safety regulations in the product
documentation.
Electrical installations
WARNING
Electrical voltage
Electric shock
●Work on electrical installations may only be carried out by qualified
electricians or by instructed persons working under the guidance and
supervision of a qualified electrician, in accordance with the electrotechnical
regulations.
●Wherever possible disconnect products from the power supply when carrying
out commissioning, maintenance or repair work on them.
●Lock volt-free areas to prevent them being switched back on again by mistake.
●Label the connection terminals with external voltage using a
'DANGER External voltage' sign.
●Route mains connections to products separately and fuse them with their own,
clearly marked fuse.
●Fit an easily accessible disconnecting device in accordance with IEC 60950-1
outside the installation.
●Produce earthing as stated in local safety regulations.

Safety
Safety regulations for the method of operation
2
A6V10421795_en--_k
15 | 151
CAUTION
Noncompliance with the following safety regulations
Risk of injury to persons and damage to property
●Compliance with the following regulations is required.
●Specialist electrical engineering knowledge is required for installation.
●Only an expert is permitted to carry out installation work.
Incorrect installation can take safety devices out of operation unbeknown to a
layperson.
Mounting, installation, commissioning and maintenance
●If you require tools such as a ladder, these must be safe and must be intended
for the work in hand.
●When starting the fire control panel ensure that unstable conditions cannot
arise.
●Ensure that all points listed in the 'Testing the product operability' section below
are observed.
●You may only set controls to normal function when the product operability has
been completely tested and the system has been handed over to the customer.
Testing the product operability
●Prevent the remote transmission from triggering erroneously.
●If testing building installations or activating devices from third-party companies,
you must collaborate with the people appointed.
●The activation of fire control installations for test purposes must not cause
injury to anyone or damage to the building installations. The following
instructions must be observed:
–Use the correct potential for activation; this is generally the potential of the
building installation.
–Only check controls up to the interface (relay with blocking option).
–Make sure that only the controls to be tested are activated.
●Inform people before testing the alarm devices and allow for possible panic
responses.
●Inform people about any noise or mist which may be produced.
●Before testing the remote transmission, inform the corresponding alarm and
fault signal receiving stations.
Modifications to the system design and the products
Modifications to the system and to individual products may lead to faults,
malfunctioning and safety risks. Written confirmation must be obtained from
Siemens and the corresponding safety bodies for modifications or additions.
Modules and spare parts
●Components and spare parts must comply with the technical specifications
defined by Siemens. Only use products specified or recommended by
Siemens.
●Only use fuses with the specified fuse characteristics.
●Wrong battery types and improper battery changing lead to a risk of explosion.
Only use the same battery type or an equivalent battery type recommended by
Siemens.
●Batteries must be disposed of in an environmentally friendly manner. Observe
national guidelines and regulations.

Safety
Release notes
2
16 | 151
A6V10421795_en--_k
Disregard of the safety regulations
Before they are delivered, Siemens products are tested to ensure they function
correctly when used properly. Siemens disclaims all liability for damage or injuries
caused by the incorrect application of the instructions or the disregard of danger
warnings contained in the documentation. This applies in particular to the following
damage:
●Personal injuries or damage to property caused by improper use and incorrect
application
●Personal injuries or damage to property caused by disregarding safety
instructions in the documentation or on the product
●Personal injury or damage to property caused by poor maintenance or lack of
maintenance
2.4 Release notes
Limitations to the configuration or use of devices in a fire detection installation with
a particular firmware version are possible.
WARNING
Limited or non-existent fire detection
Personal injury and damage to property in the event of a fire.
●Read the 'Release Notes' before you plan and/or configure a fire detection
installation.
●Read the 'Release Notes' before you carry out a firmware update to a fire
detection installation.
NOTICE
Incorrect planning and/or configuration
Important standards and specifications are not satisfied.
Fire detection installation is not accepted for commissioning.
Additional expense resulting from necessary new planning and/or configuration.
●Read the 'Release Notes' before you plan and/or configure a fire detection
installation.
●Read the 'Release Notes' before you carry out a firmware update to a fire
detection installation.

Safety
Cyber security disclaimer
2
A6V10421795_en--_k
17 | 151
2.5 Cyber security disclaimer
Siemens provides a portfolio of products, solutions, systems and services that
includes security functions that support the secure operation of plants, systems,
machines and networks. In the field of Building Technologies, this includes building
automation and control, fire safety, security management as well as physical
security systems.
In order to protect plants, systems, machines and networks against cyber threats, it
is necessary to implement –and continuously maintain –a holistic, state-of-the-art
security concept. Siemens’ portfolio only forms one element of such a concept.
You are responsible for preventing unauthorized access to your plants, systems,
machines and networks which should only be connected to an enterprise network
or the internet if and to the extent such a connection is necessary and only when
appropriate security measures (e.g. firewalls and/or network segmentation) are in
place. Additionally, Siemens’ guidance on appropriate security measures should be
taken into account. For additional information, please contact your Siemens sales
representative or visit https://www.siemens.com/global/en/home/company/topic-
areas/future-of-manufacturing/industrial-security.html.
Siemens’ portfolio undergoes continuous development to make it more secure.
Siemens strongly recommends that updates are applied as soon as they are
available and that the latest versions are used. Use of versions that are no longer
supported, and failure to apply the latest updates may increase your exposure to
cyber threats. Siemens strongly recommends to comply with security advisories on
the latest security threats, patches and other related measures, published, among
others, under https://www.siemens.com/cert/en/cert-security-advisories.htm.

Notes
Open Source Software (OSS)
3
18 | 151
A6V10421795_en--_k
3 Notes
3.1 Open Source Software (OSS)
Software license overview
These devices use Open Source Software (OSS). All Open Source Software
components used in the product (to include copyrights and licensing agreement)
are available at http://siemens.com/bt/download.
Firmware version
OSS document ID
Device
02.01.01
A6V12190258
FC361-xx, FC362-xx

System description
System overview
4
A6V10421795_en--_k
19 | 151
4 System description
4.1 System overview
The panel is a compact panel with an integrated operating unit for processing
signals from FD720 and FD360 devices. See list of compatibility
(document A6V10882301) in chapter 'Applicable documents [➙ 9]'.
The panel is operated as a standalone fire control panel.
The panel supports operation of the ↑C-NET ↑detector line in a ↑loop or ↑stub.
Automatic fire detectors (e.g. smoke and heat detectors), manual call points, alarm
devices, voice alarm devices, I/O modules and other ↑C-NET devices are
connected to the C-NET detector line(s).
The picture below shows the FC360 system overview.
Fig. 1: Overview of FC360 system
1
FC360 fire control panel
2
C-NET detector line. FC361-xx supports one detector line while FC362-xx
supports two.
3
Alarm devices, RT fire, RT fault, Fire control, configurable IOs
4
FC360 configuration tools (i.e.,'FC360 Panel Configurator', 'FC360 Desktop
Editor 2.0') for configuration via PC
5
Third-party devices such as DMS, ESPA and event printer

System description
Features
4
20 | 151
A6V10421795_en--_k
4.2 Features
System
●Monitors detectors and sounder lines
●FC361-xx: One loop or two stubs with 126 addresses
●FC362-xx: Two loops or four stubs with 252 addresses
●LCD with 7 lines, max. 21 characters per line
●Up to 2000 events can be stored in history log with date and time stamp
●Alarm counter for up to 999 alarms
●Integrated configuration tool 'FC360 Panel Configurator'
●Automatic summer/winter time change
●Country specific settings
●Multilingual